📄 rfc2465.mib
字号:
DESCRIPTION "The IPv6 Address Translation table used for mapping from IPv6 addresses to physical addresses. The IPv6 address translation table contain the Ipv6Address to `physical' address equivalencies. Some interfaces do not use translation tables for determining address equivalencies; if all interfaces are of this type, then the Address Translation table is empty, i.e., has zero entries." ::= { ipv6MIBObjects 12 } ipv6NetToMediaEntry OBJECT-TYPE SYNTAX Ipv6NetToMediaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains one IPv6 address to `physical' address equivalence." INDEX { ipv6IfIndex, ipv6NetToMediaNetAddress } ::= { ipv6NetToMediaTable 1 } Ipv6NetToMediaEntry ::= SEQUENCE { ipv6NetToMediaNetAddress Ipv6Address, ipv6NetToMediaPhysAddress PhysAddress, ipv6NetToMediaType INTEGER, ipv6IfNetToMediaState INTEGER, ipv6IfNetToMediaLastUpdated TimeStamp, ipv6NetToMediaValid TruthValue } ipv6NetToMediaNetAddress OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IPv6 Address corresponding to the media-dependent `physical' address." ::= { ipv6NetToMediaEntry 1 } ipv6NetToMediaPhysAddress OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The media-dependent `physical' address." ::= { ipv6NetToMediaEntry 2 } ipv6NetToMediaType OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following dynamic(2), -- dynamically resolved static(3), -- statically configured local(4) -- local interface } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the mapping. The 'dynamic(2)' type indicates that the IPv6 address to physical addresses mapping has been dynamically resolved using the IPv6 Neighbor Discovery protocol. The static(3)' types indicates that the mapping has been statically configured. The local(4) indicates that the mapping is provided for an entity's own interface address." ::= { ipv6NetToMediaEntry 3 } ipv6IfNetToMediaState OBJECT-TYPE SYNTAX INTEGER { reachable(1), -- confirmed reachability stale(2), -- unconfirmed reachability delay(3), -- waiting for reachability -- confirmation before entering -- the probe state probe(4), -- actively probing invalid(5), -- an invalidated mapping unknown(6) -- state can not be determined -- for some reason. } MAX-ACCESS read-only STATUS current DESCRIPTION "The Neighbor Unreachability Detection [8] state for the interface when the address mapping in this entry is used." ::= { ipv6NetToMediaEntry 4 } ipv6IfNetToMediaLastUpdated OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time this entry was last updated. If this entry was updated prior to the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { ipv6NetToMediaEntry 5 } ipv6NetToMediaValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to the value 'false(2)' has the effect of invalidating the corresponding entry in the ipv6NetToMediaTable. That is, it effectively disassociates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipv6NetToMediaValid object." DEFVAL { true } ::= { ipv6NetToMediaEntry 6 } -- definition of IPv6-related notifications. -- Note that we need ipv6NotificationPrefix with the 0 -- sub-identifier to make this MIB to translate to -- an SNMPv1 format in a reversible way. For example -- it is needed for proxies that convert SNMPv1 traps -- to SNMPv2 notifications without MIB knowledge. ipv6Notifications OBJECT IDENTIFIER ::= { ipv6MIB 2 } ipv6NotificationPrefix OBJECT IDENTIFIER ::= { ipv6Notifications 0 } ipv6IfStateChange NOTIFICATION-TYPE OBJECTS { ipv6IfDescr, ipv6IfOperStatus -- the new state of the If. } STATUS current DESCRIPTION "An ipv6IfStateChange notification signifies that there has been a change in the state of an ipv6 interface. This notification should be generated when the interface's operational status transitions to or from the up(1) state." ::= { ipv6NotificationPrefix 1 } -- conformance information ipv6Conformance OBJECT IDENTIFIER ::= { ipv6MIB 3 } ipv6Compliances OBJECT IDENTIFIER ::= { ipv6Conformance 1 } ipv6Groups OBJECT IDENTIFIER ::= { ipv6Conformance 2 } -- compliance statements ipv6Compliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMPv2 entities which implement ipv6 MIB." MODULE -- this module MANDATORY-GROUPS { ipv6GeneralGroup, ipv6NotificationGroup } OBJECT ipv6Forwarding MIN-ACCESS read-only DESCRIPTION "An agent is not required to provide write access to this object" OBJECT ipv6DefaultHopLimit MIN-ACCESS read-only DESCRIPTION "An agent is not required to provide write access to this object" OBJECT ipv6IfDescr MIN-ACCESS read-only DESCRIPTION "An agent is not required to provide write access to this object" OBJECT ipv6IfIdentifier MIN-ACCESS read-only DESCRIPTION "An agent is not required to provide write access to this object" OBJECT ipv6IfIdentifierLength MIN-ACCESS read-only DESCRIPTION "An agent is not required to provide write access to this object" OBJECT ipv6IfAdminStatus MIN-ACCESS read-only DESCRIPTION "An agent is not required to provide write access to this object" OBJECT ipv6RouteValid MIN-ACCESS read-only DESCRIPTION "An agent is not required to provide write access to this object" OBJECT ipv6NetToMediaValid MIN-ACCESS read-only DESCRIPTION "An agent is not required to provide write access to this object" ::= { ipv6Compliances 1 } ipv6GeneralGroup OBJECT-GROUP OBJECTS { ipv6Forwarding, ipv6DefaultHopLimit, ipv6Interfaces, ipv6IfTableLastChange, ipv6IfDescr, ipv6IfLowerLayer, ipv6IfEffectiveMtu, ipv6IfReasmMaxSize, ipv6IfIdentifier, ipv6IfIdentifierLength, ipv6IfPhysicalAddress, ipv6IfAdminStatus, ipv6IfOperStatus, ipv6IfLastChange, ipv6IfStatsInReceives, ipv6IfStatsInHdrErrors, ipv6IfStatsInTooBigErrors, ipv6IfStatsInNoRoutes, ipv6IfStatsInAddrErrors, ipv6IfStatsInUnknownProtos, ipv6IfStatsInTruncatedPkts, ipv6IfStatsInDiscards, ipv6IfStatsInDelivers, ipv6IfStatsOutForwDatagrams, ipv6IfStatsOutRequests, ipv6IfStatsOutDiscards, ipv6IfStatsOutFragOKs, ipv6IfStatsOutFragFails, ipv6IfStatsOutFragCreates, ipv6IfStatsReasmReqds, ipv6IfStatsReasmOKs, ipv6IfStatsReasmFails, ipv6IfStatsInMcastPkts, ipv6IfStatsOutMcastPkts, ipv6AddrPrefixOnLinkFlag, ipv6AddrPrefixAutonomousFlag, ipv6AddrPrefixAdvPreferredLifetime, ipv6AddrPrefixAdvValidLifetime, ipv6AddrPfxLength, ipv6AddrType, ipv6AddrAnycastFlag, ipv6AddrStatus, ipv6RouteNumber, ipv6DiscardedRoutes, ipv6RouteIfIndex, ipv6RouteNextHop, ipv6RouteType, ipv6RouteProtocol, ipv6RoutePolicy, ipv6RouteAge, ipv6RouteNextHopRDI, ipv6RouteMetric, ipv6RouteWeight, ipv6RouteInfo, ipv6RouteValid, ipv6NetToMediaPhysAddress, ipv6NetToMediaType, ipv6IfNetToMediaState, ipv6IfNetToMediaLastUpdated, ipv6NetToMediaValid } STATUS current DESCRIPTION "The IPv6 group of objects providing for basic management of IPv6 entities." ::= { ipv6Groups 1 } ipv6NotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { ipv6IfStateChange } STATUS current DESCRIPTION "The notification that an IPv6 entity is required to implement." ::= { ipv6Groups 2 } END
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -