rfc1612.mib

wm PNE 3.3 source code, running at more than vxworks6.x version.

   DNS-RESOLVER-MIB DEFINITIONS ::= BEGIN

   IMPORTS
       MODULE-IDENTITY, OBJECT-TYPE, IpAddress, Counter32, Integer32
           FROM SNMPv2-SMI
       RowStatus, DisplayString
           FROM SNMPv2-TC
       MODULE-COMPLIANCE, OBJECT-GROUP
           FROM SNMPv2-CONF
       dns, DnsName, DnsNameAsIndex, DnsClass, DnsType, DnsQClass,
       DnsQType, DnsTime, DnsOpCode, DnsRespCode
           FROM DNS-SERVER-MIB;

   -- DNS Resolver MIB

   dnsResMIB MODULE-IDENTITY
       LAST-UPDATED "9401282250Z"
       ORGANIZATION "IETF DNS Working Group"
       CONTACT-INFO
               "       Rob Austein
               Postal: Epilogue Technology Corporation
                       268 Main Street, Suite 283
                       North Reading, MA 10864
                       US
                  Tel: [phone]
                  Fax: [phone]
               E-Mail: [e-mail]

                       Jon Saperia
               Postal: Digital Equipment Corporation
                       110 Spit Brook Road
                       ZKO1-3/H18
                       Nashua, NH 03062-2698
                       US
                  Tel: [phone]
                  Fax: [phone]
               E-mail: [e-mail]"
       DESCRIPTION
               "The MIB module for entities implementing the client
               (resolver) side of the Domain Name System (DNS)
               protocol."
       ::= { dns 2 }

   dnsResMIBObjects        OBJECT IDENTIFIER ::= { dnsResMIB 1 }

   -- (Old-style) groups in the DNS resolver MIB.

   dnsResConfig            OBJECT IDENTIFIER ::= { dnsResMIBObjects 1 }
   dnsResCounter           OBJECT IDENTIFIER ::= { dnsResMIBObjects 2 }
   dnsResLameDelegation    OBJECT IDENTIFIER ::= { dnsResMIBObjects 3 }
   dnsResCache             OBJECT IDENTIFIER ::= { dnsResMIBObjects 4 }
   dnsResNCache            OBJECT IDENTIFIER ::= { dnsResMIBObjects 5 }
   dnsResOptCounter        OBJECT IDENTIFIER ::= { dnsResMIBObjects 6 }


   -- Resolver Configuration Group

   dnsResConfigImplementIdent OBJECT-TYPE
       SYNTAX      DisplayString
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "The implementation identification string for the
               resolver software in use on the system, for example;
               `RES-2.1'"
       ::= { dnsResConfig 1 }

   dnsResConfigService OBJECT-TYPE
       SYNTAX      INTEGER { recursiveOnly(1),
                             iterativeOnly(2),
                             recursiveAndIterative(3) }
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "Kind of DNS resolution service provided:

               recursiveOnly(1) indicates a stub resolver.

               iterativeOnly(2) indicates a normal full service
               resolver.

               recursiveAndIterative(3) indicates a full-service
               resolver which performs a mix of recursive and iterative
               queries."
        ::= { dnsResConfig 2 }

   dnsResConfigMaxCnames OBJECT-TYPE
       SYNTAX      INTEGER (0..2147483647)
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
               "Limit on how many CNAMEs the resolver should allow
               before deciding that there's a CNAME loop.  Zero means
               that resolver has no explicit CNAME limit."
       REFERENCE
               "RFC-1035 section 7.1."
       ::= { dnsResConfig 3 }

   -- DNS Resolver Safety Belt Table

   dnsResConfigSbeltTable OBJECT-TYPE
       SYNTAX      SEQUENCE OF DnsResConfigSbeltEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
               "Table of safety belt information used by the resolver
               when it hasn't got any better idea of where to send a
               query, such as when the resolver is booting or is a stub
               resolver."
       ::= { dnsResConfig 4 }

   dnsResConfigSbeltEntry OBJECT-TYPE
       SYNTAX      DnsResConfigSbeltEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
               "An entry in the resolver's Sbelt table.
               Rows may be created or deleted at any time by the DNS
               resolver and by SNMP SET requests.  Whether the values
               changed via SNMP are saved in stable storage across
               `reset' operations is implementation-specific."
       INDEX     { dnsResConfigSbeltAddr,
                   dnsResConfigSbeltSubTree,
                   dnsResConfigSbeltClass }
       ::= { dnsResConfigSbeltTable 1 }

   DnsResConfigSbeltEntry ::=
       SEQUENCE {
           dnsResConfigSbeltAddr
               IpAddress,
           dnsResConfigSbeltName
               DnsName,
           dnsResConfigSbeltRecursion
               INTEGER,
           dnsResConfigSbeltPref
               INTEGER,
           dnsResConfigSbeltSubTree
               DnsNameAsIndex,
           dnsResConfigSbeltClass
               DnsClass,
           dnsResConfigSbeltStatus
               RowStatus
       }

   dnsResConfigSbeltAddr OBJECT-TYPE
       SYNTAX      IpAddress
       -- MAX-ACCESS  not-accessible
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "The IP address of the Sbelt name server identified by
               this row of the table."
       ::= { dnsResConfigSbeltEntry 1 }

   dnsResConfigSbeltName OBJECT-TYPE
       SYNTAX      DnsName
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
               "The DNS name of a Sbelt nameserver identified by this
               row of the table.  A zero-length string indicates that
               the name is not known by the resolver."
       ::= { dnsResConfigSbeltEntry 2 }

   dnsResConfigSbeltRecursion OBJECT-TYPE
       SYNTAX      INTEGER { iterative(1),
                             recursive(2),
                             recursiveAndIterative(3) }
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
               "Kind of queries resolver will be sending to the name
               server identified in this row of the table:

               iterative(1) indicates that resolver will be directing
               iterative queries to this name server (RD bit turned
               off).

               recursive(2) indicates that resolver will be directing
               recursive queries to this name server (RD bit turned
               on).

               recursiveAndIterative(3) indicates that the resolver
               will be directing both recursive and iterative queries
               to the server identified in this row of the table."
        ::= { dnsResConfigSbeltEntry 3 }

   dnsResConfigSbeltPref OBJECT-TYPE
       SYNTAX      INTEGER (0..2147483647)
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
               "This value identifies the preference for the name server
               identified in this row of the table.  The lower the
               value, the more desirable the resolver considers this
               server."
        ::= { dnsResConfigSbeltEntry 4 }

   dnsResConfigSbeltSubTree OBJECT-TYPE
       SYNTAX      DnsNameAsIndex
       -- MAX-ACCESS  not-accessible
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "Queries sent to the name server identified by this row
               of the table are limited to those for names in the name
               subtree identified by this variable.  If no such
               limitation applies, the value of this variable is the
               name of the root domain (a DNS name consisting of a
               single zero octet)."
       ::= { dnsResConfigSbeltEntry 5 }

   dnsResConfigSbeltClass OBJECT-TYPE
       SYNTAX      DnsClass
       -- MAX-ACCESS  not-accessible
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "The class of DNS queries that will be sent to the server
               identified by this row of the table."
       ::= { dnsResConfigSbeltEntry 6 }

   dnsResConfigSbeltStatus OBJECT-TYPE
       SYNTAX      RowStatus
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
               "Row status column for this row of the Sbelt table."
       ::= { dnsResConfigSbeltEntry 7 }

   dnsResConfigUpTime OBJECT-TYPE
       SYNTAX      DnsTime
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "If the resolver has a persistent state (e.g., a
               process), this value will be the time elapsed since it
               started.  For software without persistant state, this
               value will be 0."
       ::= { dnsResConfig 5 }

   dnsResConfigResetTime OBJECT-TYPE
       SYNTAX      DnsTime
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "If the resolver has a persistent state (e.g., a process)
               and supports a `reset' operation (e.g., can be told to
               re-read configuration files), this value will be the
               time elapsed since the last time the resolver was
               `reset.'  For software that does not have persistence or
               does not support a `reset' operation, this value will be
               zero."
       ::= { dnsResConfig 6 }

   dnsResConfigReset OBJECT-TYPE
       SYNTAX      INTEGER { other(1),
                             reset(2),
                             initializing(3),
                             running(4) }
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
               "Status/action object to reinitialize any persistant
               resolver state.  When set to reset(2), any persistant
               resolver state (such as a process) is reinitialized as if
               the resolver had just been started.  This value will
               never be returned by a read operation.  When read, one of
               the following values will be returned:
                   other(1) - resolver in some unknown state;
                   initializing(3) - resolver (re)initializing;
                   running(4) - resolver currently running."
       ::= { dnsResConfig 7 }


   -- Resolver Counters Group

   -- Resolver Counter Table

   dnsResCounterByOpcodeTable OBJECT-TYPE
       SYNTAX      SEQUENCE OF DnsResCounterByOpcodeEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
               "Table of the current count of resolver queries and
               answers."
       ::= { dnsResCounter 3 }

   dnsResCounterByOpcodeEntry OBJECT-TYPE
       SYNTAX      DnsResCounterByOpcodeEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
               "Entry in the resolver counter table.  Entries are
               indexed by DNS OpCode."
       INDEX     { dnsResCounterByOpcodeCode }
       ::= { dnsResCounterByOpcodeTable 1 }

   DnsResCounterByOpcodeEntry ::=
       SEQUENCE {
           dnsResCounterByOpcodeCode
               DnsOpCode,
           dnsResCounterByOpcodeQueries
               Counter32,
           dnsResCounterByOpcodeResponses
               Counter32
       }

   dnsResCounterByOpcodeCode OBJECT-TYPE
       SYNTAX      DnsOpCode
       -- MAX-ACCESS  not-accessible
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "The index to this table.  The OpCodes that have already
               been defined are found in RFC-1035."
       REFERENCE
               "RFC-1035 section 4.1.1."
       ::= { dnsResCounterByOpcodeEntry 1 }

   dnsResCounterByOpcodeQueries OBJECT-TYPE
       SYNTAX      Counter32
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "Total number of queries that have sent out by the
               resolver since initialization for the OpCode which is
               the index to this row of the table."
       ::= { dnsResCounterByOpcodeEntry 2 }

   dnsResCounterByOpcodeResponses OBJECT-TYPE
       SYNTAX      Counter32
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "Total number of responses that have been received by the
               resolver since initialization for the OpCode which is
               the index to this row of the table."
       ::= { dnsResCounterByOpcodeEntry 3 }

   -- Resolver Response Code Counter Table

   dnsResCounterByRcodeTable OBJECT-TYPE
       SYNTAX      SEQUENCE OF DnsResCounterByRcodeEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
               "Table of the current count of responses to resolver
               queries."
       ::= { dnsResCounter 4 }

   dnsResCounterByRcodeEntry OBJECT-TYPE
       SYNTAX      DnsResCounterByRcodeEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
               "Entry in the resolver response table.  Entries are
               indexed by DNS response code."
       INDEX     { dnsResCounterByRcodeCode }
       ::= { dnsResCounterByRcodeTable 1 }

   DnsResCounterByRcodeEntry ::=
       SEQUENCE {
           dnsResCounterByRcodeCode
               DnsRespCode,
           dnsResCounterByRcodeResponses
               Counter32
       }

   dnsResCounterByRcodeCode OBJECT-TYPE
       SYNTAX      DnsRespCode
       -- MAX-ACCESS  not-accessible
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "The index to this table.  The Response Codes that have
               already been defined are found in RFC-1035."
       REFERENCE
               "RFC-1035 section 4.1.1."
       ::= { dnsResCounterByRcodeEntry 1 }

   dnsResCounterByRcodeResponses OBJECT-TYPE
       SYNTAX      Counter32
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "Number of responses the resolver has received for the
               response code value which identifies this row of the
               table."
       ::= { dnsResCounterByRcodeEntry 2 }

   -- Additional DNS Resolver Counter Objects

   dnsResCounterNonAuthDataResps OBJECT-TYPE
       SYNTAX      Counter32
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
               "Number of requests made by the resolver for which a
               non-authoritative answer (cached data) was received."
       ::= { dnsResCounter 5 }

   dnsResCounterNonAuthNoDataResps OBJECT-TYPE
       SYNTAX      Counter32
       MAX-ACCESS  read-only