rfc3144.mib

wm PNE 3.3 source code, running at more than vxworks6.x version.

If the agent can perform sorting of interfaces according to the
values of dot5StatsRecoverys, as defined in [RFC1748],
then the 'dot5StatsRecoverys' bit will be set.

If the agent can perform sorting of interfaces according to the
values of dot5StatsLobeWires, as defined in [RFC1748],
then the 'dot5StatsLobeWires' bit will be set.

If the agent can perform sorting of interfaces according to the
values of dot5StatsRemoves, as defined in [RFC1748],
then the 'dot5StatsRemoves' bit will be set.

If the agent can perform sorting of interfaces according to the
values of dot5StatsSingles, as defined in [RFC1748],
then the 'dot5StatsSingles' bit will be set.

If the agent can perform sorting of interfaces according to the
values of dot5StatsFreqErrors, as defined in [RFC1748],
then the 'dot5StatsFreqErrors' bit will be set.

If the agent can perform sorting of interfaces according to the
values of etherStatsDropEvents, as defined in [RFC2819],
then the 'etherStatsDropEvents' bit will be set.

If the agent can perform sorting of interfaces according to the
values of etherStatsOctets, as defined in [RFC2819],
then the 'etherStatsOctets' bit will be set.

If the agent can perform sorting of interfaces according to the
values of etherStatsPkts, as defined in [RFC2819],
then the 'etherStatsPkts' bit will be set.

If the agent can perform sorting of interfaces according to the
values of etherStatsBroadcastPkts, as defined in [RFC2819],
then the 'etherStatsBroadcastPkts' bit will be set.

If the agent can perform sorting of interfaces according to the
values of etherStatsMulticastPkts, as defined in [RFC2819],
then the 'etherStatsMulticastPkts' bit will be set.

If the agent can perform sorting of interfaces according to the
values of etherStatsCRCAlignErrors, as defined in [RFC2819],
then the 'etherStatsCRCAlignErrors' bit will be set.

If the agent can perform sorting of interfaces according to the
values of etherStatsUndersizePkts, as defined in [RFC2819],
then the 'etherStatsUndersizePkts' bit will be set.

If the agent can perform sorting of interfaces according to the
values of etherStatsOversizePkts, as defined in [RFC2819],
then the 'etherStatsOversizePkts' bit will be set.

If the agent can perform sorting of interfaces according to the
values of etherStatsFragments, as defined in [RFC2819],
then the 'etherStatsFragments' bit will be set.

If the agent can perform sorting of interfaces according to the
values of etherStatsJabbers, as defined in [RFC2819],
then the 'etherStatsJabbers' bit will be set.

If the agent can perform sorting of interfaces according to the
values of etherStatsCollisions, as defined in [RFC2819],
then the 'etherStatsCollisions' bit will be set.

If the agent can perform sorting of interfaces according to the
values of etherStatsPkts64Octets, as defined in [RFC2819],
then the 'etherStatsPkts64Octets' bit will be set.

If the agent can perform sorting of interfaces according to the
values of etherStatsPkts65to127Octets, as defined in [RFC2819],
then the 'etherStatsPkts65to127Octets' bit will be set.

If the agent can perform sorting of interfaces according to the
values of etherStatsPkts128to255Octets, as defined in [RFC2819],
then the 'etherStatsPkts128to255Octets' bit will be set.

If the agent can perform sorting of interfaces according to the
values of etherStatsPkts256to511Octets, as defined in [RFC2819],
then the 'etherStatsPkts256to511Octets' bit will be set.

If the agent can perform sorting of interfaces according to the
values of etherStatsPkts512to1023Octets, as defined in [RFC2819],
then the 'etherStatsPkts512to1023Octets' bit will be set.

If the agent can perform sorting of interfaces according to the
values of etherStatsPkts1024to1518Octets, as defined in
[RFC2819], then the 'etherStatsPkts1024to1518Octets' bit will
be set.


If the agent can perform sorting of interfaces according to the
values of dot1dTpPortInFrames, as defined in [RFC1493],
then the 'dot1dTpPortInFrames' bit will be set.

If the agent can perform sorting of interfaces according to the
values of dot1dTpPortOutFrames, as defined in [RFC1493],
then the 'dot1dTpPortOutFrames' bit will be set.

If the agent can perform sorting of interfaces according to the
values of dot1dTpPortInDiscards, as defined in [RFC1493],
then the 'dot1dTpPortInDiscards' bit will be set."

    ::= { interfaceTopNObjects 1 }



  interfaceTopNControlTable OBJECT-TYPE
       SYNTAX      SEQUENCE OF InterfaceTopNControlEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
        "A table of control records for reports on the top `N'
        interfaces for the value or rate of a selected object.
        The number of entries depends on the configuration of the agent.
        The maximum number of entries is implementation
        dependent."
     ::= { interfaceTopNObjects 2 }

   interfaceTopNControlEntry OBJECT-TYPE
       SYNTAX      InterfaceTopNControlEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
               "A set of parameters that control the creation of a
               report of the top N ports according to several metrics."
       INDEX    { interfaceTopNControlIndex }
       ::= { interfaceTopNControlTable 1 }

   InterfaceTopNControlEntry ::= SEQUENCE {
       interfaceTopNControlIndex
           Integer32,
       interfaceTopNObjectVariable
           INTEGER,
       interfaceTopNObjectSampleType
           INTEGER,
       interfaceTopNNormalizationReq
           TruthValue,
       interfaceTopNNormalizationFactor
           Integer32,
       interfaceTopNTimeRemaining
           Integer32,
       interfaceTopNDuration
           Integer32,
       interfaceTopNRequestedSize
           Integer32,
       interfaceTopNGrantedSize
           Integer32,
       interfaceTopNStartTime
           TimeStamp,
       interfaceTopNOwner
           OwnerString,
       interfaceTopNLastCompletionTime
           TimeStamp,
       interfaceTopNRowStatus
           RowStatus
   }

   interfaceTopNControlIndex OBJECT-TYPE
       SYNTAX      Integer32 (1 .. 65535)
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
          "An index that uniquely identifies an entry in the
          interfaceTopNControl table.  Each such entry defines
          one top N report prepared for a probe."
       ::= { interfaceTopNControlEntry 1 }


interfaceTopNObjectVariable OBJECT-TYPE
    SYNTAX INTEGER   {
               ifInOctets(0),
               ifInUcastPkts(1),
               ifInNUcastPkts(2),
               ifInDiscards(3),
               ifInErrors(4),
               ifInUnknownProtos(5),
               ifOutOctets(6),
               ifOutUcastPkts(7),
               ifOutNUcastPkts(8),
               ifOutDiscards(9),
               ifOutErrors(10),
               ifInMulticastPkts(11),
               ifInBroadcastPkts(12),
               ifOutMulticastPkts(13),
               ifOutBroadcastPkts(14),
               ifHCInOctets(15),
               ifHCInUcastPkts(16),
               ifHCInMulticastPkts(17),
               ifHCInBroadcastPkts(18),
               ifHCOutOctets(19),
               ifHCOutUcastPkts(20),
               ifHCOutMulticastPkts(21),
               ifHCOutBroadcastPkts(22),
               dot3StatsAlignmentErrors(23),
               dot3StatsFCSErrors(24),
               dot3StatsSingleCollisionFrames(25),
               dot3StatsMultipleCollisionFrames(26),
               dot3StatsSQETestErrors(27),
               dot3StatsDeferredTransmissions(28),
               dot3StatsLateCollisions(29),
               dot3StatsExcessiveCollisions(30),
               dot3StatsInternalMacTxErrors(31),
               dot3StatsCarrierSenseErrors(32),
               dot3StatsFrameTooLongs(33),
               dot3StatsInternalMacRxErrors(34),
               dot3StatsSymbolErrors(35),
               dot3InPauseFrames(36),
               dot3OutPauseFrames(37),
               dot5StatsLineErrors(38),
               dot5StatsBurstErrors(39),
               dot5StatsACErrors(40),
               dot5StatsAbortTransErrors(41),
               dot5StatsInternalErrors(42),
               dot5StatsLostFrameErrors(43),
               dot5StatsReceiveCongestions(44),
               dot5StatsFrameCopiedErrors(45),
               dot5StatsTokenErrors(46),
               dot5StatsSoftErrors(47),
               dot5StatsHardErrors(48),
               dot5StatsSignalLoss(49),
               dot5StatsTransmitBeacons(50),
               dot5StatsRecoverys(51),
               dot5StatsLobeWires(52),
               dot5StatsRemoves(53),
               dot5StatsSingles(54),
               dot5StatsFreqErrors(55),
               etherStatsDropEvents(56),
               etherStatsOctets(57),
               etherStatsPkts(58),
               etherStatsBroadcastPkts(59),
               etherStatsMulticastPkts(60),
               etherStatsCRCAlignErrors(61),
               etherStatsUndersizePkts(62),
               etherStatsOversizePkts(63),
               etherStatsFragments(64),
               etherStatsJabbers(65),
               etherStatsCollisions(66),
               etherStatsPkts64Octets(67),
               etherStatsPkts65to127Octets(68),
               etherStatsPkts128to255Octets(69),
               etherStatsPkts256to511Octets(70),
               etherStatsPkts512to1023Octets(71),
               etherStatsPkts1024to1518Octets(72),
               dot1dTpPortInFrames(73),
               dot1dTpPortOutFrames(74),
               dot1dTpPortInDiscards(75)
}
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "The particular variable to be sampled.

    Values between 0 and 22, point to MIB objects defined in
    IF-MIB [RFC2863].

    Values between 23 and 37, point to MIB objects defined in
    EtherLike-MIB [RFC2665].

    Values between 38 and 55, point to MIB objects defined in
    TOKENRING-MIB [RFC1748].

    Values between 56 and 72, point to MIB objects defined in
    RMON-MIB [RFC2819].

    Values between 73 and 75, point to MIB objects defined in
    BRIDGE-MIB [RFC1493].

    Because SNMP access control is articulated entirely in terms
    of the contents of MIB views, no access control mechanism
    exists that can restrict the value of this object to identify
    only those objects that exist in a particular MIB view.
    Because there is thus no acceptable means of restricting the
    read access that could be obtained through the TopN
    mechanism, the probe must only grant write access to this
    object in those views that have read access to all objects on
    the probe.

    During a set operation, if the supplied variable name is not
    available in the selected MIB view, or does not conform the
    other conditions mentioned above, a badValue error must be
    returned.

    This object may not be modified if the associated
    interfaceTopNControlStatus object is equal to active(1)."
 ::= { interfaceTopNControlEntry 2 }

interfaceTopNObjectSampleType OBJECT-TYPE
    SYNTAX INTEGER {
               absoluteValue(1),
               deltaValue(2),
               bandwidthPercentage(3)
           }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
     "The method of sampling the selected variable for storage in
     the interfaceTopNTable.

     If the value of this object is absoluteValue(1), the value of
     the selected variable will be copied directly into the topNValue.

     If the value of this object is deltaValue(2), the value of the
     selected variable at the last sample will be subtracted from
     the current value, and the difference will be stored in topNValue.

     If the value of this object is bandwidthPercentage(3), the agent
     records the total number of octets sent over an interval divided
     by the total number of octets that represent '100% bandwidth'
     for that interface. This ratio is multiplied by 1000 to
     retain a 3 digit integer (0..1000) in units of
     'tenth of one percent'. This type of computation is accurate for
     the octet counters. The usage of this option with respect to
     packets or error counters is not recommended.

     This object may not be modified if the associated
     interfaceTopNControlStatus object is equal to active(1)."
  ::= { interfaceTopNControlEntry 3 }


interfaceTopNNormalizationReq OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "This object indicates whether  normalization is required in the
    computation of the selected value.

    If the value of this object is 'true', the value of
    the selected variable will be multiplied by a factor equal to the
    interfaceTopNNormalizationFactor divided by the value of
    effective speed of the interface

    If the value of this object is 'false',
    the value of the selected variable will be taken 'as is' in
    the TopN computation.

    If the value of the object interfaceTopNSampleType is
    bandwidthPercentage(3), the object
    interfaceTopNNormalizationReq cannot take the value 'true'.

    The value of this object MUST be false if the effective speed of