rfc2320.mib

wm PNE 3.3 source code, running at more than vxworks6.x version.

      ::= { ipoaTrapPrefix 1 }

  ipoaDuplicateIpAddress NOTIFICATION-TYPE
      OBJECTS {
          ipNetToMediaIfIndex,
          ipNetToMediaNetAddress,
          ipNetToMediaPhysAddress,
          ipNetToMediaPhysAddress
      }
      STATUS  current
      DESCRIPTION
          "The ATMARP Server has detected more than one ATM end
          point attempting to associate the same IP address with
          different ATM addresses."
      ::= { ipoaTrapPrefix 2 }

  ipoaLisCreate NOTIFICATION-TYPE
      OBJECTS {
          ipoaLisSubnetAddr
      }
      STATUS  current
      DESCRIPTION
          "Generation of this trap occurs when an ipoaLisEntry is
          created while the ipoaLisTrapEnable.0 object has the
          value enabled(1)."
      ::= { ipoaTrapPrefix 3 }

  ipoaLisDelete NOTIFICATION-TYPE
      OBJECTS {
          ipoaLisSubnetAddr
      }
      STATUS  current
      DESCRIPTION
          "Generation of this trap occurs when an ipoaLisEntry is
          deleted while the ipoaLisTrapEnable.0 object has the
          value enabled(1)."
      ::= { ipoaTrapPrefix 4 }

  -- Conformance Definitions

  ipoaGroups      OBJECT IDENTIFIER ::= { ipoaConformance 1 }

  ipoaCompliances OBJECT IDENTIFIER ::= { ipoaConformance 2 }

  -- compliance statements

  ipoaCompliance MODULE-COMPLIANCE
      STATUS  current
      DESCRIPTION
          "The compliance statement for agents that support the
          IPOA-MIB."
      MODULE -- this module
          MANDATORY-GROUPS { ipoaGeneralGroup,
                             ipoaBasicNotificationsGroup
                }
          GROUP ipoaClientGroup
          DESCRIPTION
              "This group is mandatory for all hosts where IP
              over ATM client support is present."
          GROUP ipoaSrvrGroup
          DESCRIPTION
              "This group is mandatory for all hosts where ATMARP
              Servers are present."
          GROUP ipoaSrvrNotificationsGroup
          DESCRIPTION
              "This group is mandatory for all hosts where ATMARP
              Servers are present."
          GROUP ipoaLisNotificationsGroup
          DESCRIPTION
              "This group is mandatory for all hosts where
              ATMARP client only support is present and
              ipoaLisTrapEnable is allowed to be set to
              enabled(1)."
          GROUP ipoaLisTableGroup
          DESCRIPTION
              "This group is mandatory for all entities which
              support IP over ATM SVCs.  Support of objects in
              this group by IP over ATM clients which only
              support IP over ATM PVCs is optional."

          OBJECT ipoaLisDefaultMtu
          MIN-ACCESS  read-only
          DESCRIPTION
              "The agent is not required to allow the user
              to change the default MTU from the value 9180.

              The agent is not required to support a SET
              operation to this object in the absence of
              adequate security."

          OBJECT ipoaLisDefaultEncapsType
          MIN-ACCESS  read-only
          DESCRIPTION
              "The agent is not required to allow the user to
              specify the default encapsulation type for the
              LIS.

              The agent is not required to support a SET
              operation to this object in the absence of
              adequate security."

          OBJECT ipoaLisInactivityTimer
          MIN-ACCESS  read-only
          DESCRIPTION
              "The agent is not required to support a SET
              operation to this object in the absence of
              adequate security."

          OBJECT ipoaLisMinHoldingTime
          MIN-ACCESS  read-only
          DESCRIPTION
              "The agent is not required to support a SET
              operation to this object in the absence of
              adequate security."

          OBJECT ipoaLisQDepth
          MIN-ACCESS  read-only
          DESCRIPTION
              "The agent is not required to support a SET
              operation to this object in the absence of
              adequate security."

          OBJECT ipoaLisMaxCalls
          MIN-ACCESS  read-only
          DESCRIPTION
              "The agent is not required to support a SET
              operation to this object in the absence of
              adequate security."

          OBJECT ipoaLisCacheEntryAge
          MIN-ACCESS  read-only
          DESCRIPTION
              "The agent is not required to support a SET
              operation to this object in the absence of
              adequate security."

          OBJECT ipoaLisRetries
          MIN-ACCESS  read-only
          DESCRIPTION
              "The agent is not required to allow the user
              to change the default number of times an ATMARP
              request will be retried when no response is
              received from the default of 2.

              The agent is not required to support a SET
              operation to this object in the absence of
              adequate security."

          OBJECT ipoaLisTimeout
          MIN-ACCESS  read-only
          DESCRIPTION
              "The agent is not required to allow the user
              to change the default retransmission time from
              the default of 10 seconds.

              The agent is not required to support a SET
              operation to this object in the absence of
              adequate security."

          OBJECT ipoaLisDefaultPeakCellRate
          MIN-ACCESS  read-only
          DESCRIPTION
              "Implementations that do not support IP over
              ATM SVC usage are not required to allow the
              user to specify a best effort default peak cell
              rate since typically the ipoaLisTable won't
              exist.

              The agent is not required to support a SET
              operation to this object in the absence of
              adequate security."

          OBJECT ipoaLisIfMappingRowStatus
          SYNTAX   INTEGER {
                             active(1) -- subset of RowStatus
                           }
          MIN-ACCESS read-only
          DESCRIPTION
              "The agent is not required to support a SET
              operation to this object, and only one
              of the six enumerated values for the
              RowStatus textual convention need be
              supported, specifically: active(1)."

          OBJECT ipoaArpClientAtmAddr
          MIN-ACCESS  read-only
          DESCRIPTION
              "The agent is not required to support a SET
              operation to this object in the absence of
              adequate security."

          OBJECT ipoaArpSrvrLis
          MIN-ACCESS  read-only
          DESCRIPTION
              "The agent is not required to support a SET
              operation to this object in the absence of
              adequate security."

          OBJECT ipoaArpRemoteSrvrAdminStatus
          MIN-ACCESS  read-only
          DESCRIPTION
              "The agent is not required to support a SET
              operation to this object in the absence of
              adequate security.  In this case the value of
              this object should be up(1) when a VC
              exists to the Remote ATMARP Server or
              otherwise down(2), and the agent should not
              allow a SET operation to this object."

          OBJECT ipoaConfigPvcDefaultMtu
          MIN-ACCESS  read-only
          DESCRIPTION
              "The agent is not required to support a SET
              operation to this object in the absence of
              adequate security."

          OBJECT ipoaLisRowStatus
          SYNTAX   INTEGER {
                             active(1) -- subset of RowStatus
                           }
          MIN-ACCESS read-only
          DESCRIPTION
              "Write access is not required, and only one
              of the six enumerated values for the
              RowStatus textual convention need be
              supported, specifically: active(1)."

          OBJECT ipoaArpClientRowStatus
          SYNTAX   INTEGER {
                             active(1) -- subset of RowStatus
                           }
          MIN-ACCESS read-only
          DESCRIPTION
              "Write access is not required, and only one
              of the six enumerated values for the
              RowStatus textual convention need be
              supported, specifically: active(1)."

          OBJECT ipoaArpRemoteSrvrRowStatus
          SYNTAX   INTEGER {
                             active(1) -- subset of RowStatus
                           }
          MIN-ACCESS read-only
          DESCRIPTION
              "Write access is not required, and only one
              of the six enumerated values for the
              RowStatus textual convention need be
              supported, specifically: active(1)."

          OBJECT ipoaArpSrvrRowStatus
          SYNTAX   INTEGER {
                             active(1) -- subset of RowStatus
                           }
          MIN-ACCESS read-only
          DESCRIPTION
              "Write access is not required, and only one
              of the six enumerated values for the
              RowStatus textual convention need be
              supported, specifically: active(1)."

          OBJECT ipoaConfigPvcRowStatus
          SYNTAX   INTEGER {
                             active(1) -- subset of RowStatus
                           }
          MIN-ACCESS read-only
          DESCRIPTION
              "Write access is not required, and only one
              of the six enumerated values for the
              RowStatus textual convention need be
              supported, specifically: active(1)."

          OBJECT ipoaArpClientArpOutNaks
          MIN-ACCESS  not-accessible
          DESCRIPTION
              "Classic IP and ARP over ATM does not require
              an ATMARP client to transmit an ATMARP_NAK
              upon receipt of an ATMARP request from another
              ATMARP client.  This object should be
              implemented when an ATMARP client supports the
              transmission of ATMARP_NAKs."

      ::= { ipoaCompliances 1 }

  -- units of conformance

  ipoaGeneralGroup OBJECT-GROUP
      OBJECTS {
          ipoaVcType,
          ipoaVcNegotiatedEncapsType,
          ipoaVcNegotiatedMtu,
          ipoaConfigPvcDefaultMtu,
          ipoaConfigPvcRowStatus
      }
      STATUS  current
      DESCRIPTION
          "This group is mandatory for all IP over ATM entities."
      ::= { ipoaGroups 1 }

  ipoaClientGroup OBJECT-GROUP
      OBJECTS {
          ipoaArpClientAtmAddr,
          ipoaArpClientSrvrInUse,
          ipoaArpClientInArpInReqs,
          ipoaArpClientInArpOutReqs,
          ipoaArpClientInArpInReplies,
          ipoaArpClientInArpOutReplies,
          ipoaArpClientInArpInvalidInReqs,
          ipoaArpClientInArpInvalidOutReqs,
          ipoaArpClientArpInReqs,
          ipoaArpClientArpOutReqs,
          ipoaArpClientArpInReplies,
          ipoaArpClientArpOutReplies,
          ipoaArpClientArpInNaks,
          ipoaArpClientArpOutNaks,
          ipoaArpClientArpUnknownOps,
          ipoaArpClientArpNoSrvrResps,
          ipoaArpClientRowStatus
        }
      STATUS  current
      DESCRIPTION
          "This group is mandatory for all hosts where an IP
          over ATM client is present."
      ::= { ipoaGroups 2 }

  ipoaSrvrGroup OBJECT-GROUP
      OBJECTS {
          ipoaArpSrvrLis,
          ipoaArpSrvrInArpInReqs,
          ipoaArpSrvrInArpOutReqs,
          ipoaArpSrvrInArpInReplies,
          ipoaArpSrvrInArpOutReplies,
          ipoaArpSrvrInArpInvalidInReqs,
          ipoaArpSrvrInArpInvalidOutReqs,
          ipoaArpSrvrArpInReqs,
          ipoaArpSrvrArpOutReplies,
          ipoaArpSrvrArpOutNaks,
          ipoaArpSrvrArpDupIpAddrs,
          ipoaArpSrvrArpUnknownOps,
          ipoaArpSrvrRowStatus
       }
      STATUS  current
      DESCRIPTION
          "This group is mandatory for all hosts where ATMARP
          Servers are present."
      ::= { ipoaGroups 3 }

  ipoaBasicNotificationsGroup NOTIFICATION-GROUP
      NOTIFICATIONS {
            ipoaMtuExceeded
         }
      STATUS        current
      DESCRIPTION
          "The notification which an IP over ATM entity
          is required to implement."
      ::= { ipoaGroups 4 }

  ipoaSrvrNotificationsGroup NOTIFICATION-GROUP
      NOTIFICATIONS {
            ipoaDuplicateIpAddress
         }
      STATUS        current
      DESCRIPTION
              "The notification which an IP over ATM ATMARP
              Server is required to implement."
      ::= { ipoaGroups 5 }

  ipoaLisNotificationsGroup NOTIFICATION-GROUP
      NOTIFICATIONS {
            ipoaLisCreate,
            ipoaLisDelete
         }
      STATUS        current
      DESCRIPTION
              "The LIS-related notifications which are required
              to be implemented by an IP over ATM ATMARP server,
              as well as by any IP over ATM client which allows
              ipoaLisTrapEnable to be set to enabled(1)."
      ::= { ipoaGroups 6 }

  ipoaLisTableGroup OBJECT-GROUP
      OBJECTS {
          ipoaLisTrapEnable,
          ipoaLisSubnetAddr,
          ipoaLisDefaultMtu,
          ipoaLisDefaultEncapsType,
          ipoaLisInactivityTimer,
          ipoaLisMinHoldingTime,
          ipoaLisQDepth,
          ipoaLisMaxCalls,
          ipoaLisCacheEntryAge,
          ipoaLisRetries,
          ipoaLisTimeout,
          ipoaLisDefaultPeakCellRate,
          ipoaLisActiveVcs,
          ipoaLisRowStatus,
          ipoaLisIfMappingRowStatus,
          ipoaArpRemoteSrvrRowStatus,
          ipoaArpRemoteSrvrIpAddr,
          ipoaArpRemoteSrvrAdminStatus,
          ipoaArpRemoteSrvrOperStatus
      }
      STATUS  current
      DESCRIPTION
          "This group is mandatory for all entities which
          support IP over ATM SVCs.  Support of objects in
          this group by IP over ATM clients which only
          support IP over ATM PVCs is optional."
      ::= { ipoaGroups 7 }

  END