rfc1593.mib

wm PNE 3.3 source code, running at more than vxworks6.x version.

        ::=  { ibmappnNodeLsEntry 13 }

  ibmappnNodeLsMaxSendBtuSize  OBJECT-TYPE
        SYNTAX INTEGER
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
             "Numeric value between 0 and 32767 inclusive indicating
              the desired number of bytes in a Basic Transmission Unit
              (BTU) that can be sent on this TG.
              This is an administratively assigned value."

        ::=  { ibmappnNodeLsEntry 14 }

  ibmappnNodeLsEffCap   OBJECT-TYPE
        SYNTAX INTEGER
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "The effective capacity is an integer value that indicates
             the kilo bits per second.
             It is derived from the link bandwidth and maximum load
             factor with the range of 0 thru 603,979,776.
             This is an administratively assigned value associated
             with the TG using this link station."

        ::=  { ibmappnNodeLsEntry 15 }

  ibmappnNodeLsConnCost OBJECT-TYPE
        SYNTAX INTEGER (0..255)
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "Cost per connect time: a value representing
             the relative cost per unit of time to use
             the TG. Range is from 0, which means no cost,
             to 255, which indicates maximum cost.
             This is an administratively assigned value associated
             with the TG using this link station."
        ::=  { ibmappnNodeLsEntry 16 }

  ibmappnNodeLsByteCost  OBJECT-TYPE
        SYNTAX INTEGER (0..255)
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "Relative cost of transmitting a byte over this link.
             Range is from 0 (lowest cost) to 255.
             This is an administratively assigned value associated
             with the TG using this link station."

        ::=  { ibmappnNodeLsEntry 17 }

  ibmappnNodeLsSecurity  OBJECT-TYPE
        SYNTAX INTEGER {
                       nonsecure(1),                --X'01'
                       publicSwitchedNetwork(32),   --X'20'
                       undergroundCable(64),        --X'40'
                       secureConduit(96),           --X'60'
                       guardedConduit(128),         --X'80'
                       encrypted(160),              --X'A0'
                       guardedRadiation(192)        --X'C0'
               }
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "The security is represented as an integer with a range of
             1 thru 255 with the most common values enumerated as
             defined above.
             This is an administratively assigned value associated
             with the TG using this link station."

        ::=  { ibmappnNodeLsEntry 18 }

  ibmappnNodeLsDelay  OBJECT-TYPE
        SYNTAX INTEGER {
                       minimum(0),                 --X'00'
                       negligible(384),            --X'4C'
                       terrestrial(9216),          --X'71'
                       packet(147456),             --X'91'
                       long(294912),               --X'99'
                       maximum(2013265920)         --X'FF'
               }
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
             "Relative amount of time that it takes for a signal to
              travel the length of the logical link.  This time is
              represented in micro seconds, with some of the more
              common values enumerated.
              This is an administratively assigned value associated
              with the TG using this link station."

        ::=  { ibmappnNodeLsEntry 19 }

  ibmappnNodeLsUsr1  OBJECT-TYPE
        SYNTAX INTEGER (0..255)
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "First user-defined TG characteristic for this TG with
             a range of 0-255.
             This is an administratively assigned value associated
             with the TG using this link station."

        ::=  { ibmappnNodeLsEntry 20 }

  ibmappnNodeLsUsr2  OBJECT-TYPE
        SYNTAX INTEGER (0..255)
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "Second user-defined TG characteristic for this TG with
             a range of 0-255.
             This is an administratively assigned value associated
             with the TG using this link station."

        ::=  { ibmappnNodeLsEntry 21 }

  ibmappnNodeLsUsr3  OBJECT-TYPE
        SYNTAX INTEGER (0..255)
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "Third user-defined TG characteristic for this TG with
             a range of 0-255.
             This is an administratively assigned value associated
             with the TG using this link station."

        ::=  { ibmappnNodeLsEntry 22 }

  ibmappnNodeLsInXidBytes OBJECT-TYPE
        SYNTAX Counter
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
             "Number of XID bytes received."

        ::=  { ibmappnNodeLsEntry 23 }

  ibmappnNodeLsInMsgBytes OBJECT-TYPE
        SYNTAX Counter
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
             "Number of message (I-frame) bytes received."

        ::=  { ibmappnNodeLsEntry 24 }

  ibmappnNodeLsInXidFrames OBJECT-TYPE
        SYNTAX Counter
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
             "Number of XID frames received."

        ::=  { ibmappnNodeLsEntry 25 }

  ibmappnNodeLsInMsgFrames OBJECT-TYPE
        SYNTAX Counter
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
             "Number of message (I-frame) frames received."

        ::=  { ibmappnNodeLsEntry 26 }

  ibmappnNodeLsOutXidBytes OBJECT-TYPE
        SYNTAX Counter
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
             "Number of XID bytes sent."

        ::=  { ibmappnNodeLsEntry 27 }

  ibmappnNodeLsOutMsgBytes OBJECT-TYPE
        SYNTAX Counter
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
             "Number of message (I-frame) bytes sent."
        ::=  { ibmappnNodeLsEntry 28 }

  ibmappnNodeLsOutXidFrames OBJECT-TYPE
        SYNTAX Counter
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
             "Number of XID frames sent."

        ::=  { ibmappnNodeLsEntry 29 }

  ibmappnNodeLsOutMsgFrames OBJECT-TYPE
        SYNTAX Counter
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
             "Number of message (I-frame) frames sent."

        ::=  { ibmappnNodeLsEntry 30 }

  ibmappnNodeLsEchoRsps     OBJECT-TYPE
        SYNTAX Counter
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
             "Number of responses returned from adjacent link station.
              A response should be returned for each test frame sent by
              this node.
              Test frames are sent to adjacent nodes periodically to
              verify connectivity and to measure that actual round trip
              time, that is the time the test frame is sent until the
              response is received."

        ::=  { ibmappnNodeLsEntry 31 }

  ibmappnNodeLsCurrentDelay  OBJECT-TYPE
        SYNTAX INTEGER
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
             "The time that it took for the last test signal to be
              sent and returned from this link station to the
              adjacent links station.
              This time is represented in milliseconds."

        ::=  { ibmappnNodeLsEntry 32 }

  ibmappnNodeLsMaxDelay      OBJECT-TYPE
        SYNTAX INTEGER
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
             "The longest time it took for a test signal
              to be sent and returned from this link station to the
              adjacent links station.
              This time is represented in milliseconds ."

        ::=  { ibmappnNodeLsEntry 33 }

  ibmappnNodeLsMinDelay      OBJECT-TYPE
        SYNTAX INTEGER
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
             "The shortest time it took for a test signal
              to be sent and returned from this link station to the
              adjacent links station.
              This time is represented in milliseconds."

        ::=  { ibmappnNodeLsEntry 34 }

  ibmappnNodeLsMaxDelayTime  OBJECT-TYPE
        SYNTAX TimeTicks
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
             "The time (since system up in hundredth of seconds)
              when the longest delay occurred.
              This time can be used to identify when this high
              water mark occurred in relation to the last initialization
              of the APPN node."

        ::=  { ibmappnNodeLsEntry 35 }

  ibmappnNodeLsGoodXids    OBJECT-TYPE
      SYNTAX  Counter
      ACCESS  read-only
      STATUS  mandatory
      DESCRIPTION
              "The total number of successful XIDs that have occurred
               on this link station since the time it was started."

        ::=  { ibmappnNodeLsEntry 36 }

  ibmappnNodeLsBadXids    OBJECT-TYPE
      SYNTAX  Counter
      ACCESS  read-only
      STATUS  mandatory
      DESCRIPTION
              "The total number of unsuccessful XIDs that have occurred
               on this link station since the time it was started."

        ::=  { ibmappnNodeLsEntry 37 }

  ibmappnNodeLsSpecific  OBJECT-TYPE
        SYNTAX OBJECT IDENTIFIER
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
             "Identifies the DLC specific OBJECT IDENTIFIER
              that can provide additional information."

        ::=  { ibmappnNodeLsEntry 38 }

  ibmappnNodeLsSubState     OBJECT-TYPE
        SYNTAX INTEGER    {
                           inactive(1),
                           sentReqOpnstn(2),
                           pendXidExch(3),
                           sentActAs(4),
                           sentSetMode(5),
                           active(6),
                           sentDeactAsOrd(7),
                           sentDiscOrd(8),
                           sentDestroyTg(9),
                           sentCreateTg(10),
                           sentConnReq(11),
                           pendRcvConnInd(12),
                           pendSendConnRsp(13),
                           sentConnRsp(14),
                           pendDeact(15)
                           }
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
             "State of this link station."

        ::=  { ibmappnNodeLsEntry 39 }

  ibmappnNodeLsStartTime     OBJECT-TYPE
        SYNTAX TimeTicks
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
             "The time (in hundredth of seconds) this link station
              has been active the last time since the time APPN was
              initialized."

        ::=  { ibmappnNodeLsEntry 40 }

  ibmappnNodeLsActiveTime    OBJECT-TYPE
        SYNTAX TimeTicks
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
             "The time (in hundredth of seconds) this link station
              has been in the active state.
              A zero value indicates the link station has never been
              active."

        ::=  { ibmappnNodeLsEntry 41 }

  ibmappnNodeLsCurrentStateTime  OBJECT-TYPE
        SYNTAX TimeTicks
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
             "The time (in hundredth of seconds) the link station is
              in the current state."

        ::=  { ibmappnNodeLsEntry 42 }


  -- **************************************************************
  -- Link station table (TCP/IP specific)
  --

  ibmappnNodeLsIpTable OBJECT-TYPE
        SYNTAX SEQUENCE OF IbmappnNodeLsIpEntry
        ACCESS not-accessible
        STATUS mandatory
        DESCRIPTION
            "Link station table (TCP/IP specific)."

        ::= { ibmappnLinkStationInformation 2 }

  ibmappnNodeLsIpEntry OBJECT-TYPE
        SYNTAX IbmappnNodeLsIpEntry
        ACCESS not-accessible
        STATUS mandatory
        DESCRIPTION
             "The IP Name is used as the index to this table."
        INDEX
               {ibmappnNodeLsIpName }

        ::= { ibmappnNodeLsIpTable 1 }

  IbmappnNodeLsIpEntry ::= SEQUENCE {
        ibmappnNodeLsIpName             DisplayString,
        ibmappnNodeLsIpState            INTEGER,
        ibmappnNodeLsLocalIpAddr        IpAddress,
        ibmappnNodeLsLocalIpPortNum     INTEGER,
        ibmappnNodeLsRemoteIpAddr       IpAddress,
        ibmappnNodeLsRemoteIpPortNum    INTEGER
                                     }

  ibmappnNodeLsIpName OBJECT-TYPE
        SYNTAX DisplayString (SIZE (1..8))
        ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "Administratively-assigned name for this link station. The
             name can be from one to eight characters."

        ::=  { ibmappnNodeLsIpEntry 1 }

  ibmappnNodeLsIpState        OBJECT-TYPE
        SYNTAX INTEGER    {
                           inactive(1),