rfc1650.mib

wm PNE 3.3 source code, running at more than vxworks6.x version.

EtherLike-MIB DEFINITIONS ::= BEGIN

   IMPORTS
       MODULE-IDENTITY, OBJECT-TYPE, Counter32  FROM SNMPv2-SMI
       MODULE-COMPLIANCE, OBJECT-GROUP          FROM SNMPv2-CONF
       ifIndex                                  FROM IF-MIB
       mib-2, transmission                      FROM RFC1213-MIB;

   etherMIB MODULE-IDENTITY
       LAST-UPDATED "9402030400Z"
       ORGANIZATION "IETF Interfaces MIB Working Group"
       CONTACT-INFO

        "        Frank Kastenholz

         Postal: FTP Software
                 2 High Street
                 North Andover, MA 01845
                 US

            Tel: [phone]
         E-Mail: [e-mail]"
       DESCRIPTION
     "The MIB module to describe generic objects for
     Ethernet-like network interfaces. This MIB is an
     updated version of the Ethernet-like MIB in RFC
     1398."
       ::= { mib-2 35 }

   etherMIBObjects OBJECT IDENTIFIER ::= { etherMIB 1 }

   dot3    OBJECT IDENTIFIER ::= { transmission 7 }

   -- the Ethernet-like Statistics group

    dot3StatsTable  OBJECT-TYPE
         SYNTAX     SEQUENCE OF Dot3StatsEntry
         MAX-ACCESS not-accessible
         STATUS     current
         DESCRIPTION
          "Statistics for a collection of ethernet-like
          interfaces attached to a particular system."
         ::= { dot3 2 }


    dot3StatsEntry   OBJECT-TYPE
         SYNTAX      Dot3StatsEntry
         MAX-ACCESS  not-accessible
         STATUS      current
         DESCRIPTION
           "Statistics for a particular interface to an
           ethernet-like medium."
         INDEX       { dot3StatsIndex }
         ::= { dot3StatsTable 1 }

    Dot3StatsEntry ::= SEQUENCE {
         dot3StatsIndex                      INTEGER,
         dot3StatsAlignmentErrors            Counter32,
         dot3StatsFCSErrors                  Counter32,
         dot3StatsSingleCollisionFrames      Counter32,
         dot3StatsMultipleCollisionFrames    Counter32,
         dot3StatsSQETestErrors              Counter32,
         dot3StatsDeferredTransmissions      Counter32,
         dot3StatsLateCollisions             Counter32,
         dot3StatsExcessiveCollisions        Counter32,
         dot3StatsInternalMacTransmitErrors  Counter32,
         dot3StatsCarrierSenseErrors         Counter32,
         dot3StatsFrameTooLongs              Counter32,
         dot3StatsInternalMacReceiveErrors   Counter32,
                 dot3StatsEtherChipSet               OBJECT IDENTIFIER
    }

    dot3StatsIndex   OBJECT-TYPE
         SYNTAX      INTEGER
         MAX-ACCESS  read-only
         STATUS      current
         DESCRIPTION
           "An index value that uniquely identifies an
           interface to an ethernet-like medium.  The
           interface identified by a particular value of
           this index is the same interface as identified
           by the same value of ifIndex."
         ::= { dot3StatsEntry 1 }

    dot3StatsAlignmentErrors   OBJECT-TYPE
         SYNTAX     Counter32
         MAX-ACCESS read-only
         STATUS     current
         DESCRIPTION
          "A count of frames received on a particular
          interface that are not an integral number of
          octets in length and do not pass the FCS check.

          The count represented by an instance of this
          object is incremented when the alignmentError
          status is returned by the MAC service to the
          LLC (or other MAC user). Received frames for
          which multiple error conditions obtain are,
          according to the conventions of IEEE 802.3
          Layer Management, counted exclusively according
          to the error status presented to the LLC."
         REFERENCE
         "IEEE 802.3 Layer Management"
         ::= { dot3StatsEntry 2 }


    dot3StatsFCSErrors   OBJECT-TYPE
         SYNTAX      Counter32
         MAX-ACCESS  read-only
         STATUS      current
         DESCRIPTION
         "A count of frames received on a particular
         interface that are an integral number of octets
         in length but do not pass the FCS check.

         The count represented by an instance of this
         object is incremented when the frameCheckError
         status is returned by the MAC service to the
         LLC (or other MAC user). Received frames for
         which multiple error conditions obtain are,
         according to the conventions of IEEE 802.3
         Layer Management, counted exclusively according
         to the error status presented to the LLC."
         REFERENCE
         "IEEE 802.3 Layer Management"
         ::= { dot3StatsEntry 3 }

    dot3StatsSingleCollisionFrames   OBJECT-TYPE
         SYNTAX      Counter32
         MAX-ACCESS  read-only
         STATUS      current
         DESCRIPTION
         "A count of successfully transmitted frames on
         a particular interface for which transmission
         is inhibited by exactly one collision.

         A frame that is counted by an instance of this
         object is also counted by the corresponding
         instance of either the ifOutUcastPkts,
         ifOutMulticastPkts, or ifOutBroadcastPkts,
         and is not counted by the corresponding
         instance of the dot3StatsMultipleCollisionFrames
         object."
         REFERENCE
         "IEEE 802.3 Layer Management"
         ::= { dot3StatsEntry 4 }


    dot3StatsMultipleCollisionFrames   OBJECT-TYPE
         SYNTAX      Counter32
         MAX-ACCESS  read-only
         STATUS      current
         DESCRIPTION
         "A count of successfully transmitted frames on
         a particular interface for which transmission
          is inhibited by more than one collision.

         A frame that is counted by an instance of this
         object is also counted by the corresponding
         instance of either the ifOutUcastPkts,
         ifOutMulticastPkts, or ifOutBroadcastPkts,
         and is not counted by the corresponding
         instance of the dot3StatsSingleCollisionFrames
         object."
         REFERENCE
         "IEEE 802.3 Layer Management"
         ::= { dot3StatsEntry 5 }


    dot3StatsSQETestErrors   OBJECT-TYPE
         SYNTAX     Counter32
         MAX-ACCESS read-only
         STATUS     current
         DESCRIPTION
         "A count of times that the SQE TEST ERROR
         message is generated by the PLS sublayer for a
         particular interface. The SQE TEST ERROR
         message is defined in section 7.2.2.2.4 of
         ANSI/IEEE 802.3-1985 and its generation is
         described in section 7.2.4.6 of the same
         document."
         REFERENCE
         "ANSI/IEEE Std 802.3-1985 Carrier Sense
         Multiple Access with Collision Detection Access
         Method and Physical Layer Specifications"
         ::= { dot3StatsEntry 6 }

    dot3StatsDeferredTransmissions   OBJECT-TYPE
         SYNTAX      Counter32
         MAX-ACCESS  read-only
         STATUS      current
         DESCRIPTION
         "A count of frames for which the first
         transmission attempt on a particular interface
         is delayed because the medium is busy.

         The count represented by an instance of this
         object does not include frames involved in
         collisions."
         REFERENCE
         "IEEE 802.3 Layer Management"
         ::= { dot3StatsEntry 7 }

    dot3StatsLateCollisions   OBJECT-TYPE
         SYNTAX      Counter32
         MAX-ACCESS  read-only
         STATUS      current
         DESCRIPTION
         "The number of times that a collision is
         detected on a particular interface later than
         512 bit-times into the transmission of a
         packet.

         Five hundred and twelve bit-times corresponds
         to 51.2 microseconds on a 10 Mbit/s system. A
         (late) collision included in a count
         represented by an instance of this object is
         also considered as a (generic) collision for
         purposes of other collision-related
         statistics."
         REFERENCE
         "IEEE 802.3 Layer Management"
         ::= { dot3StatsEntry 8 }

    dot3StatsExcessiveCollisions   OBJECT-TYPE
         SYNTAX    Counter32
         MAX-ACCESS    read-only
         STATUS    current
         DESCRIPTION
         "A count of frames for which transmission on a
         particular interface fails due to excessive
         collisions."
         REFERENCE
         "IEEE 802.3 Layer Management"
         ::= { dot3StatsEntry 9 }


    dot3StatsInternalMacTransmitErrors   OBJECT-TYPE
         SYNTAX    Counter32
         MAX-ACCESS    read-only
         STATUS    current
         DESCRIPTION
         "A count of frames for which transmission on a
         particular interface fails due to an internal
         MAC sublayer transmit error. A frame is only
         counted by an instance of this object if it is
         not counted by the corresponding instance of
         either the dot3StatsLateCollisions object, the
         dot3StatsExcessiveCollisions object, or the
         dot3StatsCarrierSenseErrors object.

         The precise meaning of the count represented by
         an instance of this object is implementation-
         specific.  In particular, an instance of this
         object may represent a count of transmission
         errors on a particular interface that are not
         otherwise counted."
         REFERENCE
         "IEEE 802.3 Layer Management"
         ::= { dot3StatsEntry 10 }

    dot3StatsCarrierSenseErrors   OBJECT-TYPE
         SYNTAX    Counter32
         MAX-ACCESS    read-only
         STATUS    current
         DESCRIPTION
         "The number of times that the carrier sense
         condition was lost or never asserted when
         attempting to transmit a frame on a particular
         interface.

         The count represented by an instance of this
         object is incremented at most once per
         transmission attempt, even if the carrier sense
         condition fluctuates during a transmission
         attempt."
         REFERENCE
         "IEEE 802.3 Layer Management"
         ::= { dot3StatsEntry 11 }

    -- { dot3StatsEntry 12 } is not assigned

    dot3StatsFrameTooLongs   OBJECT-TYPE
         SYNTAX    Counter32
         MAX-ACCESS    read-only
         STATUS    current
         DESCRIPTION
         "A count of frames received on a particular
         interface that exceed the maximum permitted
         frame size.

         The count represented by an instance of this
         object is incremented when the frameTooLong
         status is returned by the MAC service to the