rfc1447.mib

wm PNE 3.3 source code, running at more than vxworks6.x version.

                      old key.  If no value for the old key exists, a
                      zero-length OCTET STRING is used in the
                      calculation."
              DEFVAL      { ''H }     -- the empty string
              ::= { partyEntry 9 }


          partyAuthPublic OBJECT-TYPE
              SYNTAX      OCTET STRING
                          -- for v2md5AuthProtocol: (SIZE (0..16))
              MAX-ACCESS  read-create
              STATUS      current
              DESCRIPTION
                      "A publically-readable value for the party.

                      Depending on the party's authentication protocol,
                      this value may be needed to support the party's
                      authentication protocol.  Alternatively, it may be
                      used by a manager during the procedure for
                      altering secret information about a party.  (For
                      example, by altering the value of an instance of
                      this object in the same SNMPv2 Set-Request used to
                      update an instance of partyAuthPrivate, a
                      subsequent Get-Request can determine if the Set-
                      Request was successful in the event that no
                      response to the Set-Request is received, see [4].)

                      The length of the value is dependent on the
                      party's authentication protocol.  If not used by
                      the authentication protocol, it is recommended
                      that agents support values of any length up to and
                      including the length of the corresponding
                      partyAuthPrivate object."
              DEFVAL      { ''H }      -- the empty string
              ::= { partyEntry 10 }


          partyAuthLifetime OBJECT-TYPE
              SYNTAX      INTEGER (0..2147483647)
              UNITS       "seconds"
              MAX-ACCESS  read-create
              STATUS      current
              DESCRIPTION
                      "The lifetime (in units of seconds) which
                      represents an administrative upper bound on
                      acceptable delivery delay for protocol messages
                      generated by the party.

                      Once an instance of this object is created, its
                      value can not be changed."
              DEFVAL      { 300 }
              ::= { partyEntry 11 }

          partyPrivProtocol OBJECT-TYPE
              SYNTAX      OBJECT IDENTIFIER
              MAX-ACCESS  read-create
              STATUS      current
              DESCRIPTION
                      "The privacy protocol by which all protocol
                      messages received by the party are protected from
                      disclosure.  The value noPriv signifies that
                      messages received by the party are not protected.

                      Once an instance of this object is created, its
                      value can not be changed."
              DEFVAL      { noPriv }
              ::= { partyEntry 12 }


          partyPrivPrivate OBJECT-TYPE
              SYNTAX      OCTET STRING
                          -- for desPrivProtocol: (SIZE (16))
              MAX-ACCESS  read-create
              STATUS      current
              DESCRIPTION
                      "An encoding of the party's private encryption key
                      which may be needed to support the privacy
                      protocol.  Although the value of this variable may
                      be altered by a management operation (e.g., a
                      SNMPv2 Set-Request), its value can never be
                      retrieved by a management operation: when read,
                      the value of this variable is the zero length
                      OCTET STRING.

                      The private encryption key is NOT directly
                      represented by the value of this variable, but
                      rather it is represented according to an encoding.
                      This encoding is the bitwise exclusive-OR of the
                      old key with the new key, i.e., of the old private
                      encryption key (prior to the alteration) with the
                      new private encryption key (after the alteration).
                      Thus, when processing a received protocol Set
                      operation, the new private encryption key is
                      obtained from the value of this variable as the
                      result of a bitwise exclusive-OR of the variable's
                      value and the old private encryption key.  In
                      calculating the exclusive-OR, if the old key is
                      shorter than the new key, zero-valued padding is
                      appended to the old key.  If no value for the old
                      key exists, a zero-length OCTET STRING is used in
                      the calculation."
              DEFVAL      { ''H }     -- the empty string
              ::= { partyEntry 13 }


          partyPrivPublic OBJECT-TYPE
              SYNTAX      OCTET STRING
                          -- for desPrivProtocol: (SIZE (0..16))
              MAX-ACCESS  read-create
              STATUS      current
              DESCRIPTION
                      "A publically-readable value for the party.

                      Depending on the party's privacy protocol, this
                      value may be needed to support the party's privacy
                      protocol.  Alternatively, it may be used by a
                      manager as a part of its procedure for altering
                      secret information about a party.  (For example,
                      by altering the value of an instance of this
                      object in the same SNMPv2 Set-Request used to
                      update an instance of partyPrivPrivate, a
                      subsequent Get-Request can determine if the Set-
                      Request was successful in the event that no
                      response to the Set-Request is received, see [4].)

                      The length of the value is dependent on the
                      party's privacy protocol.  If not used by the
                      privacy protocol, it is recommended that agents
                      support values of any length up to and including
                      the length of the corresponding partyPrivPrivate
                      object."
              DEFVAL      { ''H }     -- the empty string
              ::= { partyEntry 14 }


          partyCloneFrom OBJECT-TYPE
              SYNTAX      Party
              MAX-ACCESS  read-create
              STATUS      current
              DESCRIPTION
                      "The identity of a party to clone authentication
                      and privacy parameters from.  When read, the value
                      { 0 0 } is returned.

                      This value must be written exactly once, when the
                      associated instance of partyStatus either does not
                      exist or has the value `notReady'.  When written,
                      the value identifies a party, the cloning party,
                      whose status column has the value `active'.  The
                      cloning party is used in two ways.

                      One, if instances of the following objects do not
                      exist for the party being created, then they are
                      created with values identical to those of the
                      corresponding objects for the cloning party:

                           partyAuthProtocol
                           partyAuthPublic
                           partyAuthLifetime
                           partyPrivProtocol
                           partyPrivPublic

                      Two, instances of the following objects are
                      updated using the corresponding values of the
                      cloning party:

                           partyAuthPrivate
                           partyPrivPrivate

                      (e.g., the value of the cloning party's instance
                      of the partyAuthPrivate object is XOR'd with the
                      value of the partyAuthPrivate instances of the
                      party being created.)"
              ::= { partyEntry 15 }


          partyStorageType OBJECT-TYPE
              SYNTAX      StorageType
              MAX-ACCESS  read-create
              STATUS      current
              DESCRIPTION
                      "The storage type for this conceptual row in the
                      partyTable."
              DEFVAL      { nonVolatile }
              ::= { partyEntry 16 }

          partyStatus OBJECT-TYPE
              SYNTAX      RowStatus
              MAX-ACCESS  read-create
              STATUS      current
              DESCRIPTION
                      "The status of this conceptual row in the
                      partyTable.

                      A party is not qualified for activation until
                      instances of all columns of its partyEntry row
                      have an appropriate value.  In particular:

                        A value must be written to the Party's
                        partyCloneFrom object.

                        If the Party's partyAuthProtocol object has the
                        value md5AuthProtocol, then the corresponding
                        instance of partyAuthPrivate must contain a
                        secret of the appropriate length.  Further, at
                        least one management protocol set operation
                        updating the value of the party's
                        partyAuthPrivate object must be successfully
                        processed, before the partyAuthPrivate column is
                        considered appropriately configured.

                        If the Party's partyPrivProtocol object has the
                        value desPrivProtocol, then the corresponding
                        instance of partyPrivPrivate must contain a
                        secret of the appropriate length.  Further, at
                        least one management protocol set operation
                        updating the value of the party's
                        partyPrivPrivate object must be successfully
                        processed, before the partyPrivPrivate column is
                        considered appropriately configured.

                     Until instances of all corresponding columns are
                     appropriately configured, the value of the
                     corresponding instance of the partyStatus column is
                     `notReady'."
              ::= { partyEntry 17 }

          -- the SNMPv2 contexts database group

          snmpContexts   OBJECT IDENTIFIER ::= { partyMIBObjects 2 }


          contextTable OBJECT-TYPE
              SYNTAX      SEQUENCE OF ContextEntry
              MAX-ACCESS  not-accessible
              STATUS      current
              DESCRIPTION
                      "The SNMPv2 Context database."
              ::= { snmpContexts 1 }

          contextEntry OBJECT-TYPE
              SYNTAX      ContextEntry
              MAX-ACCESS  not-accessible
              STATUS      current
              DESCRIPTION
                      "Locally held information about a particular
                      SNMPv2 context."
              INDEX      { IMPLIED contextIdentity }
              ::= { contextTable 1 }

          ContextEntry ::=
              SEQUENCE {
                  contextIdentity         Context,
                  contextIndex            INTEGER,
                  contextLocal            TruthValue,
                  contextViewIndex        INTEGER,
                  contextLocalEntity      OCTET STRING,
                  contextLocalTime        OBJECT IDENTIFIER,
                  contextProxyDstParty    Party,
                  contextProxySrcParty    Party,
                  contextProxyContext     OBJECT IDENTIFIER,
                  contextStorageType      StorageType,
                  contextStatus           RowStatus
              }


          contextIdentity OBJECT-TYPE
              SYNTAX      Context
              MAX-ACCESS  not-accessible
              STATUS      current
              DESCRIPTION
                      "A context identifier uniquely identifying a
                      particular SNMPv2 context."
              ::= { contextEntry 1 }

          contextIndex OBJECT-TYPE
              SYNTAX      INTEGER (1..65535)
              MAX-ACCESS  read-only
              STATUS      current
              DESCRIPTION
                      "A unique value for each SNMPv2 context.  The
                      value for each SNMPv2 context must remain constant
                      at least from one re-initialization of the
                      entity's network management system to the next
                      re-initialization."
              ::= { contextEntry 2 }

          contextLocal OBJECT-TYPE
              SYNTAX      TruthValue
              MAX-ACCESS  read-create
              STATUS      current