rfc3434.mib

wm PNE 3.3 source code, running at more than vxworks6.x version.

            This object may not be modified if the associated
            hcAlarmStatus object is equal to active(1)."
    ::= { hcAlarmEntry 9 }

hcAlarmRisingThresholdValStatus OBJECT-TYPE
    SYNTAX      HcValueStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "This object indicates the sign of the data for the rising
            threshold, as defined by the hcAlarmRisingThresAbsValueLo
            and hcAlarmRisingThresAbsValueHi objects, as described in
            the HcValueStatus textual convention.

            The enumeration 'valueNotAvailable(1)' is not allowed, and
            the associated hcAlarmStatus object cannot be equal to
            'active(1)' if this object is set to this value.

            This object may not be modified if the associated
            hcAlarmStatus object is equal to active(1)."
    ::= { hcAlarmEntry 10 }

hcAlarmFallingThreshAbsValueLo OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "The lower 32 bits of the absolute value for threshold for
            the sampled statistic.  The actual threshold value is
            determined by the associated instances of the
            hcAlarmFallingThreshAbsValueHi and
            hcAlarmFallingThresholdValStatus objects, as follows:

               ABS(threshold) = hcAlarmFallingThreshAbsValueLo +
                     (hcAlarmFallingThreshAbsValueHi * 2^^32)

            The absolute value of the threshold is adjusted as required,
            as described in the HcValueStatus textual convention.  These
            three object instances are conceptually combined to
            represent the falling threshold for this entry.

            When the current sampled value is less than or equal to this
            threshold, and the value at the last sampling interval was
            greater than this threshold, a single event will be
            generated.  A single event will also be generated if the
            first sample after this entry becomes valid is less than or
            equal to this threshold and the associated
            hcAlarmStartupAlarm is equal to fallingAlarm(2) or
            risingOrFallingAlarm(3).

            After a falling event is generated, another such event will
            not be generated until the sampled value rises above this
            threshold and reaches the threshold identified by the
            hcAlarmRisingThreshAbsValueLo,
            hcAlarmRisingThreshAbsValueHi, and
            hcAlarmRisingThresholdValStatus objects.

            This object may not be modified if the associated
            hcAlarmStatus object is equal to active(1)."
    ::= { hcAlarmEntry 11 }

hcAlarmFallingThreshAbsValueHi OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "The upper 32 bits of the absolute value for threshold for
            the sampled statistic.  The actual threshold value is
            determined by the associated instances of the
            hcAlarmFallingThreshAbsValueLo and
            hcAlarmFallingThresholdValStatus objects, as follows:

               ABS(threshold) = hcAlarmFallingThreshAbsValueLo +
                     (hcAlarmFallingThreshAbsValueHi * 2^^32)

            The absolute value of the threshold is adjusted as required,
            as described in the HcValueStatus textual convention.  These
            three object instances are conceptually combined to
            represent the falling threshold for this entry.

            When the current sampled value is less than or equal to this
            threshold, and the value at the last sampling interval was
            greater than this threshold, a single event will be
            generated.  A single event will also be generated if the
            first sample after this entry becomes valid is less than or
            equal to this threshold and the associated
            hcAlarmStartupAlarm is equal to fallingAlarm(2) or
            risingOrFallingAlarm(3).

            After a falling event is generated, another such event will
            not be generated until the sampled value rises above this
            threshold and reaches the threshold identified by the
            hcAlarmRisingThreshAbsValueLo,
            hcAlarmRisingThreshAbsValueHi, and
            hcAlarmRisingThresholdValStatus objects.

            This object may not be modified if the associated
            hcAlarmStatus object is equal to active(1)."
    ::= { hcAlarmEntry 12 }

hcAlarmFallingThresholdValStatus OBJECT-TYPE
    SYNTAX      HcValueStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "This object indicates the sign of the data for the falling
            threshold, as defined by the hcAlarmFallingThreshAbsValueLo
            and hcAlarmFallingThreshAbsValueHi objects, as described in
            the HcValueStatus textual convention.

            The enumeration 'valueNotAvailable(1)' is not allowed, and
            the associated hcAlarmStatus object cannot be equal to
            'active(1)' if this object is set to this value.

            This object may not be modified if the associated
            hcAlarmStatus object is equal to active(1)."
    ::= { hcAlarmEntry 13 }

hcAlarmRisingEventIndex OBJECT-TYPE
    SYNTAX      Integer32 (0..65535)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "The index of the eventEntry that is used when a rising
            threshold is crossed.  The eventEntry identified by a
            particular value of this index is the same as identified by
            the same value of the eventIndex object.  If there is no
            corresponding entry in the eventTable, then no association
            exists.  In particular, if this value is zero, no associated
            event will be generated, as zero is not a valid event index.

            This object may not be modified if the associated
            hcAlarmStatus object is equal to active(1)."
    ::= { hcAlarmEntry 14 }

hcAlarmFallingEventIndex OBJECT-TYPE
    SYNTAX      Integer32 (0..65535)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "The index of the eventEntry that is used when a falling
            threshold is crossed.  The eventEntry identified by a
            particular value of this index is the same as identified by
            the same value of the eventIndex object.  If there is no
            corresponding entry in the eventTable, then no association
            exists.  In particular, if this value is zero, no associated
            event will be generated, as zero is not a valid event index.

            This object may not be modified if the associated
            hcAlarmStatus object is equal to active(1)."
    ::= { hcAlarmEntry 15 }

hcAlarmValueFailedAttempts OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "The number of times the associated hcAlarmVariable instance
            was polled on behalf of this hcAlarmEntry, (while in the
            active state) and the value was not available.  This counter
            may experience a discontinuity if the agent restarts,
            indicated by the value of sysUpTime."
    ::= { hcAlarmEntry 16 }

hcAlarmOwner OBJECT-TYPE
    SYNTAX     OwnerString
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
            "The entity that configured this entry and is therefore
            using the resources assigned to it."
    ::= { hcAlarmEntry 17 }

hcAlarmStorageType OBJECT-TYPE
    SYNTAX     StorageType
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
            "The type of non-volatile storage configured for this entry.
            If this object is equal to 'permanent(4)', then the
            associated hcAlarmRisingEventIndex and
            hcAlarmFallingEventIndex objects must be writable."
    ::= { hcAlarmEntry 18 }

hcAlarmStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
            "The status of this row.

            An entry MUST NOT exist in the active state unless all
            objects in the entry have an appropriate value, as described
            in the description clause for each writable object.

            The hcAlarmStatus object may be modified if the associated
            instance of this object is equal to active(1),
            notInService(2), or notReady(3).  All other writable objects
            may be modified if the associated instance of this object is
            equal to notInService(2) or notReady(3)."
    ::= { hcAlarmEntry 19 }

--
-- Capabilities
--

hcAlarmCapabilities OBJECT-TYPE
    SYNTAX      BITS {
       hcAlarmCreation(0),
       hcAlarmNvStorage(1)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "An indication of the high capacity alarm capabilities
            supported by this agent.

            If the 'hcAlarmCreation' BIT is set, then this agent allows
            NMS applications to create entries in the hcAlarmTable.

            If the 'hcAlarmNvStorage' BIT is set, then this agent allows
            entries in the hcAlarmTable which will be recreated after a
            system restart, as controlled by the hcAlarmStorageType
            object."
    ::= { hcAlarmCapabilitiesObjects 1 }

--
-- Notifications
--

hcAlarmNotifPrefix OBJECT IDENTIFIER
      ::= { hcAlarmNotifications 0 }

hcRisingAlarm NOTIFICATION-TYPE
    OBJECTS  { hcAlarmVariable,
               hcAlarmSampleType,
               hcAlarmAbsValue,
               hcAlarmValueStatus,
               hcAlarmRisingThreshAbsValueLo,
               hcAlarmRisingThreshAbsValueHi,
               hcAlarmRisingThresholdValStatus,
               hcAlarmRisingEventIndex }
    STATUS   current
    DESCRIPTION
            "The SNMP notification that is generated when a high
            capacity alarm entry crosses its rising threshold and
            generates an event that is configured for sending SNMP
            traps.

            The hcAlarmEntry object instances identified in the OBJECTS
            clause are from the entry that causes this notification to
            be generated."
     ::= { hcAlarmNotifPrefix 1 }

hcFallingAlarm NOTIFICATION-TYPE
    OBJECTS { hcAlarmVariable,
              hcAlarmSampleType,
              hcAlarmAbsValue,
              hcAlarmValueStatus,
              hcAlarmFallingThreshAbsValueLo,
              hcAlarmFallingThreshAbsValueHi,
              hcAlarmFallingThresholdValStatus,
              hcAlarmFallingEventIndex }
    STATUS    current
    DESCRIPTION
            "The SNMP notification that is generated when a high
            capacity alarm entry crosses its falling threshold and
            generates an event that is configured for sending SNMP
            traps.

            The hcAlarmEntry object instances identified in the OBJECTS
            clause are from the entry that causes this notification to
            be generated."
     ::= { hcAlarmNotifPrefix 2 }

--
-- Conformance Section
--

hcAlarmCompliances OBJECT IDENTIFIER ::= { hcAlarmConformance 1 }
hcAlarmGroups      OBJECT IDENTIFIER ::= { hcAlarmConformance 2 }

hcAlarmCompliance MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
            "Describes the requirements for conformance to the High
            Capacity Alarm MIB."
    MODULE  -- this module
        MANDATORY-GROUPS {
                           hcAlarmControlGroup,
                           hcAlarmCapabilitiesGroup,
                           hcAlarmNotificationsGroup
                         }

    MODULE RMON-MIB
        MANDATORY-GROUPS { rmonEventGroup }

    ::= { hcAlarmCompliances 1 }

-- Object Groups

hcAlarmControlGroup OBJECT-GROUP
    OBJECTS {
             hcAlarmInterval,
             hcAlarmVariable,
             hcAlarmSampleType,
             hcAlarmAbsValue,
             hcAlarmValueStatus,
             hcAlarmStartupAlarm,
             hcAlarmRisingThreshAbsValueLo,
             hcAlarmRisingThreshAbsValueHi,
             hcAlarmRisingThresholdValStatus,
             hcAlarmFallingThreshAbsValueLo,
             hcAlarmFallingThreshAbsValueHi,
             hcAlarmFallingThresholdValStatus,
             hcAlarmRisingEventIndex,
             hcAlarmFallingEventIndex,
             hcAlarmValueFailedAttempts,
             hcAlarmOwner,
             hcAlarmStorageType,
             hcAlarmStatus
    }
    STATUS  current
    DESCRIPTION
            "A collection of objects used to configure entries for high
            capacity alarm threshold monitoring purposes."
    ::= { hcAlarmGroups 1 }

hcAlarmCapabilitiesGroup OBJECT-GROUP
    OBJECTS {
             hcAlarmCapabilities
    }
    STATUS  current
    DESCRIPTION
            "A collection of objects used to indicate an agent's high
            capacity alarm threshold monitoring capabilities."
    ::= { hcAlarmGroups 2 }

hcAlarmNotificationsGroup NOTIFICATION-GROUP
    NOTIFICATIONS {
            hcRisingAlarm,
            hcFallingAlarm
    }
    STATUS  current
    DESCRIPTION
            "A collection of notifications to deliver information
            related to a high capacity rising or falling threshold event
            to a management application."
    ::= { hcAlarmGroups 3 }
END