rfc2758.mib

wm PNE 3.3 source code, running at more than vxworks6.x version.

   slapmPolicyStatsOperStatus OBJECT-TYPE
      SYNTAX      INTEGER {
                             inactive(1),
                             active(2),
                             deleteNeeded(3)
                          }
      MAX-ACCESS  read-only
      STATUS      deprecated
      DESCRIPTION
         "The state of a policy entry:

           inactive(1)      - An policy entry was either defined
                              by local system definition or
                              discovered via a directory search
                              but has not been activated (not
                              currently being used).
           active(2)        - Policy entry is being used to affect
                              traffic flows.
           deleteNeeded(3)  - Either though local implementation
                              dependent methods or by discovering
                              that the directory entry corresponding
                              to this table entry no longer
                              exists and slapmPolicyPurgeTime needs
                              to expire before attempting to remove
                              the corresponding slapmPolicyStatsEntry
                              and any dependent slapmPolicyMonitor
                              table entries.
         Note: a policy traffic profile in a state other than
         active(1) is not being used to affect traffic flows."
      ::= { slapmPolicyStatsEntry 4 }

   slapmPolicyStatsActiveConns OBJECT-TYPE
      SYNTAX      Gauge32
      MAX-ACCESS  read-only
      STATUS      deprecated
      DESCRIPTION
         "The number of active TCP connections that are
         affected by the corresponding policy entry."
      ::= { slapmPolicyStatsEntry 5 }

   slapmPolicyStatsTotalConns OBJECT-TYPE
      SYNTAX      Counter32
      MAX-ACCESS  read-only
      STATUS      deprecated
      DESCRIPTION
         "The number of total TCP connections that are
         affected by the corresponding policy entry."
      ::= { slapmPolicyStatsEntry 6 }

   slapmPolicyStatsFirstActivated OBJECT-TYPE
      SYNTAX      DateAndTime
      MAX-ACCESS  read-only
      STATUS      deprecated
      DESCRIPTION
         "The timestamp for when the corresponding policy entry
         is activated.  The value of this object serves as
         the discontinuity event indicator when polling entries
         in this table.  The value of this object is updated on
         transition of slapmPolicyStatsOperStatus into the active(2)
         state."
      DEFVAL { '0000000000000000'H }
      ::= { slapmPolicyStatsEntry 7 }

   slapmPolicyStatsLastMapping OBJECT-TYPE
      SYNTAX      DateAndTime
      MAX-ACCESS  read-only
      STATUS      deprecated
      DESCRIPTION
         "The timestamp for when the last time
         that the associated policy entry was used."
      DEFVAL { '0000000000000000'H }
      ::= { slapmPolicyStatsEntry 8 }

   slapmPolicyStatsInOctets OBJECT-TYPE
      SYNTAX      Counter32
      MAX-ACCESS  read-only
      STATUS      deprecated
      DESCRIPTION
         "The number of octets that was received by IP for an
         entity that map to this entry."
      ::= { slapmPolicyStatsEntry 9 }

   slapmPolicyStatsOutOctets OBJECT-TYPE
      SYNTAX      Counter32
      MAX-ACCESS  read-only
      STATUS      deprecated
      DESCRIPTION
         "The number of octets that was transmitted by IP for an
         entity that map to this entry."
      ::= { slapmPolicyStatsEntry 10 }

   slapmPolicyStatsConnectionLimit OBJECT-TYPE
      SYNTAX      Integer32
      MAX-ACCESS  read-only
      STATUS      deprecated
      DESCRIPTION
         "The limit for the number of active TCP connections that
         are allowed for this policy definition.  A value of zero
         for this object implies that a connection limit has not
         been specified."
      ::= { slapmPolicyStatsEntry 11 }

   slapmPolicyStatsCountAccepts OBJECT-TYPE
      SYNTAX      Counter32
      MAX-ACCESS  read-only
      STATUS      deprecated
      DESCRIPTION
          "This counter is incremented when a policy action's
          Permission value is set to Accept and a session
          (TCP connection) is accepted."
      ::= { slapmPolicyStatsEntry 12 }

   slapmPolicyStatsCountDenies OBJECT-TYPE
      SYNTAX      Counter32
      MAX-ACCESS  read-only
      STATUS      deprecated
      DESCRIPTION
          "This counter is incremented when a policy action's
          Permission value is set to Deny and a session is denied,
          or when a session (TCP connection) is rejected due to a
          policy's connection limit (slapmPolicyStatsConnectLimit)
          being reached."
      ::= { slapmPolicyStatsEntry 13 }

   slapmPolicyStatsInDiscards OBJECT-TYPE
      SYNTAX      Counter32
      MAX-ACCESS  read-only
      STATUS      deprecated
      DESCRIPTION
          "This counter counts the number of in octets discarded.
          This occurs when an error is detected.  Examples of this
          are buffer overflow, checksum error, or bad packet
          format."
      ::= { slapmPolicyStatsEntry 14 }

   slapmPolicyStatsOutDiscards OBJECT-TYPE
      SYNTAX      Counter32
      MAX-ACCESS  read-only
      STATUS      deprecated
      DESCRIPTION
          "This counter counts the number of out octets discarded.
          Examples of this are buffer overflow, checksum error, or
          bad packet format."
      ::= { slapmPolicyStatsEntry 15 }

   slapmPolicyStatsInPackets OBJECT-TYPE
      SYNTAX      Counter32
      MAX-ACCESS  read-only
      STATUS      deprecated
      DESCRIPTION
          "This counter counts the number of in packets received
          that relate to this policy entry from IP."
      ::= { slapmPolicyStatsEntry 16 }

   slapmPolicyStatsOutPackets OBJECT-TYPE
      SYNTAX      Counter32
      MAX-ACCESS  read-only
      STATUS      deprecated
      DESCRIPTION
          "This counter counts the number of out packets sent
          by IP that relate to this policy entry."
      ::= { slapmPolicyStatsEntry 17 }

   slapmPolicyStatsInProfileOctets OBJECT-TYPE
      SYNTAX      Counter32
      MAX-ACCESS  read-only
      STATUS      deprecated
      DESCRIPTION
          "This counter counts the number of in octets that are
          determined to be within profile."
      ::= { slapmPolicyStatsEntry 18 }

   slapmPolicyStatsOutProfileOctets OBJECT-TYPE
      SYNTAX      Counter32
      MAX-ACCESS  read-only
      STATUS      deprecated
      DESCRIPTION
          "This counter counts the number of out octets that are
          determined to be within profile."
      ::= { slapmPolicyStatsEntry 19 }

   slapmPolicyStatsMinRate OBJECT-TYPE
      SYNTAX      Integer32
      UNITS       "Kilobits per second"
      MAX-ACCESS  read-only
      STATUS      deprecated
      DESCRIPTION
          "The minimum transfer rate defined for this entry."
      ::= { slapmPolicyStatsEntry 20 }

   slapmPolicyStatsMaxRate OBJECT-TYPE
      SYNTAX      Integer32
      UNITS       "Kilobits per second"
      MAX-ACCESS  read-only
      STATUS      deprecated
      DESCRIPTION
          "The maximum transfer rate defined for this entry."
      ::= { slapmPolicyStatsEntry 21 }

   slapmPolicyStatsMaxDelay OBJECT-TYPE
      SYNTAX      Integer32
      UNITS       "milliseconds"
      MAX-ACCESS  read-only
      STATUS      deprecated
      DESCRIPTION
          "The maximum delay defined for this entry."
      ::= { slapmPolicyStatsEntry 22 }

   -- SLA Performance Monitoring Policy Monitor Table

   slapmPolicyMonitorTable OBJECT-TYPE
      SYNTAX SEQUENCE OF SlapmPolicyMonitorEntry
      MAX-ACCESS not-accessible
      STATUS     deprecated
      DESCRIPTION
          "Provides a method of monitoring policies and their
          effect at a system.

          This table has been deprecated and replaced with
          the slapmPRMonTable.  Older implementations of
          this MIB are expected to continue their support
          of this table."
     ::= { slapmTableObjects 2 }

   slapmPolicyMonitorEntry OBJECT-TYPE
      SYNTAX     SlapmPolicyMonitorEntry
      MAX-ACCESS not-accessible
      STATUS     deprecated
      DESCRIPTION
          "Defines an entry in the slapmPolicyMonitorTable. This
          table defines which policies should be monitored on a
          per policy traffic profile basis."
      INDEX {
             slapmPolicyMonitorOwnerIndex,
             slapmPolicyMonitorSystemAddress,
             slapmPolicyMonitorPolicyName,
             slapmPolicyMonitorTrafficProfileName
            }
      ::= { slapmPolicyMonitorTable 1 }

   SlapmPolicyMonitorEntry ::=
      SEQUENCE {
          slapmPolicyMonitorOwnerIndex              SnmpAdminString,
          slapmPolicyMonitorSystemAddress           OCTET STRING,
          slapmPolicyMonitorPolicyName              SlapmNameType,
          slapmPolicyMonitorTrafficProfileName      SlapmNameType,
          slapmPolicyMonitorControl                 BITS,
          slapmPolicyMonitorStatus                  SlapmStatus,
          slapmPolicyMonitorInterval                Integer32,
          slapmPolicyMonitorIntTime                 DateAndTime,
          slapmPolicyMonitorCurrentInRate           Gauge32,
          slapmPolicyMonitorCurrentOutRate          Gauge32,
          slapmPolicyMonitorMinRateLow              Integer32,
          slapmPolicyMonitorMinRateHigh             Integer32,
          slapmPolicyMonitorMaxRateHigh             Integer32,
          slapmPolicyMonitorMaxRateLow              Integer32,
          slapmPolicyMonitorMaxDelayHigh            Integer32,
          slapmPolicyMonitorMaxDelayLow             Integer32,
          slapmPolicyMonitorMinInRateNotAchieves    Counter32,
          slapmPolicyMonitorMaxInRateExceeds        Counter32,
          slapmPolicyMonitorMaxDelayExceeds         Counter32,
          slapmPolicyMonitorMinOutRateNotAchieves   Counter32,
          slapmPolicyMonitorMaxOutRateExceeds       Counter32,
          slapmPolicyMonitorCurrentDelayRate        Gauge32,
          slapmPolicyMonitorRowStatus               RowStatus
      }

   slapmPolicyMonitorOwnerIndex OBJECT-TYPE
      SYNTAX      SnmpAdminString (SIZE(0..16))
      MAX-ACCESS  not-accessible
      STATUS      deprecated
      DESCRIPTION
         "To facilitate the provisioning of access control by a
         security administrator using the View-Based Access
         Control Model (RFC 2575, VACM) for tables in which
         multiple users may need to independently create or modify
         entries, the initial index is used as an 'owner index'.
         Such an initial index has a syntax of SnmpAdminString,
         and can thus be trivially mapped to a securityName or
         groupName as defined in VACM, in accordance with a
         security policy.

         All entries in that table belonging to a particular user
         will have the same value for this initial index.  For a
         given user's entries in a particular table, the object
         identifiers for the information in these entries will
         have the same subidentifiers (except for the 'column'
         subidentifier) up to the end of the encoded owner index.
         To configure VACM to permit access to this portion of the
         table, one would create vacmViewTreeFamilyTable entries
         with the value of vacmViewTreeFamilySubtree including the
         owner index portion, and vacmViewTreeFamilyMask
         'wildcarding' the column subidentifier.  More elaborate
         configurations are possible."
      ::= { slapmPolicyMonitorEntry 1 }

   slapmPolicyMonitorSystemAddress OBJECT-TYPE
      SYNTAX      OCTET STRING (SIZE(0 | 4 | 16))
      MAX-ACCESS  not-accessible
      STATUS      deprecated
      DESCRIPTION
         "Address of a system that an Policy definition relates to.
         A zero length octet string can be used to indicate that
         only a single system is being represented.
         Otherwise, the length of the octet string should be
         4 for an ipv4 address and 16 for an ipv6 address."
      ::= { slapmPolicyMonitorEntry 2 }

   slapmPolicyMonitorPolicyName OBJECT-TYPE
      SYNTAX      SlapmNameType
      MAX-ACCESS  not-accessible
      STATUS      deprecated
      DESCRIPTION
         "Policy name that this entry relates to."
      ::= { slapmPolicyMonitorEntry 3 }

   slapmPolicyMonitorTrafficProfileName OBJECT-TYPE
      SYNTAX      SlapmNameType
      MAX-ACCESS  not-accessible
      STATUS      deprecated
      DESCRIPTION
         "The corresponding Traffic Profile name."
      ::= { slapmPolicyMonitorEntry 4 }

   slapmPolicyMonitorControl OBJECT-TYPE
      SYNTAX      BITS {
                        monitorMinRate(0),
                        monitorMaxRate(1),
                        monitorMaxDelay(2),
                        enableAggregateTraps(3),
                        enableSubcomponentTraps(4),
                        monitorSubcomponents(5)