rfc1382.mib

wm PNE 3.3 source code, running at more than vxworks6.x version.

                          "Entries of x25CircuitTable."
                  INDEX { x25CircuitIndex,
                          x25CircuitChannel }
                  ::= { x25CircuitTable 1 }

          X25CircuitEntry ::= SEQUENCE {
                  x25CircuitIndex
                          IfIndexType,
                  x25CircuitChannel
                          INTEGER,
                  x25CircuitStatus
                          INTEGER,
                  x25CircuitEstablishTime
                          TimeTicks,
                  x25CircuitDirection
                          INTEGER,
                  x25CircuitInOctets
                          Counter,
                  x25CircuitInPdus
                          Counter,
                  x25CircuitInRemotelyInitiatedResets
                          Counter,
                  x25CircuitInProviderInitiatedResets
                          Counter,
                  x25CircuitInInterrupts
                          Counter,
                  x25CircuitOutOctets
                          Counter,
                  x25CircuitOutPdus
                          Counter,
                  x25CircuitOutInterrupts
                          Counter,
                  x25CircuitDataRetransmissionTimeouts
                          Counter,
                  x25CircuitResetTimeouts
                          Counter,
                  x25CircuitInterruptTimeouts
                          Counter,
                  x25CircuitCallParamId
                          OBJECT IDENTIFIER,
                  x25CircuitCalledDteAddress
                          X121Address,
                  x25CircuitCallingDteAddress
                          X121Address,
                  x25CircuitOriginallyCalledAddress
                          X121Address,
                  x25CircuitDescr
                          DisplayString
                  }

          x25CircuitIndex OBJECT-TYPE
                  SYNTAX  IfIndexType
                  ACCESS  read-only
                  STATUS  mandatory
                  DESCRIPTION
                          "The ifIndex value for the X.25 Interface."
                  ::= { x25CircuitEntry 1 }

          x25CircuitChannel OBJECT-TYPE
                  SYNTAX  INTEGER (0..4095)
                  ACCESS  read-only
                  STATUS  mandatory
                  DESCRIPTION
                          "The channel number for this circuit."
                  ::= { x25CircuitEntry 2 }

          x25CircuitStatus OBJECT-TYPE
                  SYNTAX  INTEGER {               -- state table states
                                  invalid (1),
                                  closed (2),             -- (p1)
                                  calling (3),            -- (p2,p3,p5)
                                  open (4),               -- (p4)
                                  clearing (5),           -- (p6,p7)
                                  pvc (6),
                                  pvcResetting (7),
                                  startClear (8),         -- Close cmd
                                  startPvcResetting (9),  -- Reset cmd
                                  other (10)
                          }
                  ACCESS  read-write
                  STATUS  mandatory
                  DESCRIPTION
                          "This object reports the current status of
                          the circuit.

                          An existing instance of this object can only
                          be set to startClear, startPvcResetting, or
                          invalid.  An instance with the value calling
                          or open can only be set to startClear and
                          that action will start clearing the circuit.
                          An instance with the value PVC can only be
                          set to startPvcResetting or invalid and that
                          action resets the PVC or deletes the circuit
                          respectively.  The values startClear or
                          startPvcResetting will never be returned by
                          an agent.  An attempt to set the status of
                          an existing instance to a value other than
                          one of these values will result in an error.

                          A non-existing instance can be set to PVC to
                          create a PVC if the implementation supports
                          dynamic creation of PVCs.  Some
                          implementations may only allow creation and
                          deletion of PVCs if the interface is down.
                          Since the instance identifier will supply
                          the PLE index and the channel number,
                          setting this object alone supplies
                          sufficient information to create the
                          instance.  All the DEFVAL clauses for the
                          other objects of this table are appropriate
                          for creating a PVC; PLEs creating entries
                          for placed or accepted calls will use values
                          appropriate for the call rather than the
                          value of the DEFVAL clause.  Two managers
                          trying to create the same PVC can determine
                          from the return code which manager succeeded
                          and which failed (the failing manager fails
                          because it can not set a value of PVC for an
                          existing object).
                          An entry in the closed or invalid state may
                          be deleted or reused at the agent's
                          convence.  If the entry is kept in the
                          closed state, the values of the parameters
                          associated with the entry must be correct.
                          Closed implies the values in the circuit
                          table are correct.

                          The value of invalid indicates the other
                          values in the table are invalid.  Many
                          agents may never return a value of invalid
                          because they dynamically allocate and free
                          unused table entries.  An agent for a
                          statically configured systems can return
                          invalid to indicate the entry has not yet
                          been used so the counters contain no
                          information."
                  REFERENCE "See ISO 8208,
                                  table 33 for (p<n>) state table"
                  ::= { x25CircuitEntry 3 }

          x25CircuitEstablishTime OBJECT-TYPE
                  SYNTAX  TimeTicks
                  ACCESS  read-only
                  STATUS  mandatory
                  DESCRIPTION
                          "The value of sysUpTime when the channel was
                          associated with this circuit.  For outgoing
                          SVCs, this is the time the first call packet
                          was sent.  For incoming SVCs, this is the
                          time the call indication was received.  For
                          PVCs this is the time the PVC was able to
                          pass data to a higher layer entity without
                          loss of data."
                  ::= { x25CircuitEntry 4 }

          x25CircuitDirection OBJECT-TYPE
                  SYNTAX  INTEGER {
                                  incoming (1),
                                  outgoing (2),
                                  pvc (3)
                          }
                  ACCESS  read-write
                  STATUS  mandatory
                  DESCRIPTION
                          "The direction of the call that established
                          this circuit."
                  REFERENCE "10733 direction"
                  DEFVAL { pvc }
                  ::= { x25CircuitEntry 5 }

                          -- X25 Circuit data flow statistics

          x25CircuitInOctets OBJECT-TYPE
                  SYNTAX  Counter
                  ACCESS  read-only
                  STATUS  mandatory
                  DESCRIPTION
                          "The number of octets of user data delivered
                          to upper layer."
                  REFERENCE "5.11 octetsReceivedCounter"
                  ::= { x25CircuitEntry 6 }

          x25CircuitInPdus OBJECT-TYPE
                  SYNTAX  Counter
                  ACCESS  read-only
                  STATUS  mandatory
                  DESCRIPTION
                          "The number of PDUs received for this
                          circuit."
                  REFERENCE "10733 5.11 dataPacketsReceived"
                  ::= { x25CircuitEntry 7 }

          x25CircuitInRemotelyInitiatedResets OBJECT-TYPE
                  SYNTAX  Counter
                  ACCESS  read-only
                  STATUS  mandatory
                  DESCRIPTION
                          "The number of Resets received for this
                          circuit with cause code of DTE initiated."
                  REFERENCE "10733 remotelyInitiatedResets"
                  ::= { x25CircuitEntry 8 }

          x25CircuitInProviderInitiatedResets OBJECT-TYPE
                  SYNTAX  Counter
                  ACCESS  read-only
                  STATUS  mandatory
                  DESCRIPTION
                          "The number of Resets received for this
                          circuit with cause code other than DTE
                          initiated."
                  REFERENCE "10733 ProviderInitiatedResets"
                  ::= { x25CircuitEntry 9 }

          x25CircuitInInterrupts OBJECT-TYPE
                  SYNTAX  Counter
                  ACCESS  read-only
                  STATUS  mandatory
                  DESCRIPTION
                          "The number of interrupt packets received
                          for this circuit."
                  REFERENCE "10733 interruptPacketsReceived"
                  ::= { x25CircuitEntry 10 }

          x25CircuitOutOctets OBJECT-TYPE
                  SYNTAX  Counter
                  ACCESS  read-only
                  STATUS  mandatory
                  DESCRIPTION
                          "The number of octets of user data sent for
                          this circuit."
                  REFERENCE "10733 5.11 octetsSentCounter"
                  ::= { x25CircuitEntry 11 }

          x25CircuitOutPdus OBJECT-TYPE
                  SYNTAX  Counter
                  ACCESS  read-only
                  STATUS  mandatory
                  DESCRIPTION
                          "The number of PDUs sent for this circuit."
                  REFERENCE "10733 5.11 dataPacketsSent"
                  ::= { x25CircuitEntry 12 }

          x25CircuitOutInterrupts OBJECT-TYPE
                  SYNTAX  Counter
                  ACCESS  read-only
                  STATUS  mandatory
                  DESCRIPTION
                          "The number of interrupt packets sent on
                          this circuit."
                  REFERENCE "10733 interruptPacketsSent"
                  ::= { x25CircuitEntry 13 }


                          -- X25 circuit timer statistics

          x25CircuitDataRetransmissionTimeouts OBJECT-TYPE
                  SYNTAX  Counter
                  ACCESS  read-only
                  STATUS  mandatory
                  DESCRIPTION
                          "The number of times the T25 data
                          retransmission timer expired for this
                          circuit."
                  REFERENCE "10733 5.11 dataRetransmissionTimerExpiries"
                  ::= { x25CircuitEntry 14 }

          x25CircuitResetTimeouts OBJECT-TYPE
                  SYNTAX  Counter
                  ACCESS  read-only
                  STATUS  mandatory
                  DESCRIPTION
                          "The number of times the T22 reset timer
                          expired for this circuit."
                  REFERENCE "10733 5.11 resetTimeouts"
                  ::= { x25CircuitEntry 15 }

          x25CircuitInterruptTimeouts OBJECT-TYPE
                  SYNTAX  Counter
                  ACCESS  read-only
                  STATUS  mandatory
                  DESCRIPTION
                          "The number of times the T26 Interrupt timer
                          expired for this circuit."
                  REFERENCE "10733 interruptTimerExpiries"
                  ::= { x25CircuitEntry 16 }

          x25CircuitCallParamId OBJECT-TYPE
                  SYNTAX  OBJECT IDENTIFIER
                  ACCESS  read-write
                  STATUS  mandatory
                  DESCRIPTION
                          "This identifies the instance of the
                          x25CallParmIndex for the entry in the
                          x25CallParmTable which contains the call
                          parameters in use with this circuit.  The
                          entry referenced must contain the values
                          that are currently in use by the circuit
                          rather than proposed values.  A value of
                          NULL indicates the circuit is a PVC or is
                          using all the default parameters."
                  DEFVAL { {0 0} }
                  ::= { x25CircuitEntry 17 }

          x25CircuitCalledDteAddress OBJECT-TYPE
                  SYNTAX  X121Address
                  ACCESS  read-write
                  STATUS  mandatory
                  DESCRIPTION
                          "For incoming calls, this is the called
                          address from the call indication packet.
                          For outgoing calls, this