rfc2591.mib

wm PNE 3.3 source code, running at more than vxworks6.x version.

    DISMAN-SCHEDULE-MIB DEFINITIONS ::= BEGIN

    IMPORTS
        MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
        Integer32, Unsigned32, Counter32, mib-2
            FROM SNMPv2-SMI

        TEXTUAL-CONVENTION,
        DateAndTime, RowStatus, StorageType, VariablePointer
            FROM SNMPv2-TC

        MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
            FROM SNMPv2-CONF

        SnmpAdminString
            FROM SNMP-FRAMEWORK-MIB;

    schedMIB MODULE-IDENTITY
        LAST-UPDATED "9811171800Z"
        ORGANIZATION "IETF Distributed Management Working Group"
        CONTACT-INFO
            "David B. Levi
             Nortel Networks
             4401 Great America Parkway
             Santa Clara, CA 95052-8185
             U.S.A.
             Tel: [phone]
             E-mail: [e-mail]

             Juergen Schoenwaelder
             TU Braunschweig
             Bueltenweg 74/75
             38106 Braunschweig
             Germany
             Tel: [phone]
             E-mail: [e-mail]"
        DESCRIPTION
            "This MIB module defines a MIB which provides mechanisms
             to schedule SNMP set operations periodically or at
             specific points in time."
        ::= { mib-2 63 }

    --
    -- The various groups defined within this MIB definition:
    --

    schedObjects       OBJECT IDENTIFIER ::= { schedMIB 1 }
    schedNotifications OBJECT IDENTIFIER ::= { schedMIB 2 }
    schedConformance   OBJECT IDENTIFIER ::= { schedMIB 3 }

    --
    -- Textual Conventions:
    --

    SnmpPduErrorStatus ::= TEXTUAL-CONVENTION
        STATUS       current
        DESCRIPTION
            "This TC enumerates the SNMPv1 and SNMPv2 PDU error status
             codes as defined in RFC 1157 and RFC 1905. It also adds a
             pseudo error status code `noResponse' which indicates a
             timeout condition."
        SYNTAX      INTEGER {
                        noResponse(-1),
                        noError(0),
                        tooBig(1),
                        noSuchName(2),
                        badValue(3),
                        readOnly(4),
                        genErr(5),
                        noAccess(6),
                        wrongType(7),
                        wrongLength(8),
                        wrongEncoding(9),
                        wrongValue(10),
                        noCreation(11),
                        inconsistentValue(12),
                        resourceUnavailable(13),
                        commitFailed(14),
                        undoFailed(15),
                        authorizationError(16),
                        notWritable(17),
                        inconsistentName(18)
                    }

    --
    -- Some scalars which provide information about the local time
    -- zone.
    --

    schedLocalTime OBJECT-TYPE
        SYNTAX      DateAndTime (SIZE (11))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The local time used by the scheduler. Schedules which
             refer to calendar time will use the local time indicated
             by this object. An implementation MUST return all 11 bytes
             of the DateAndTime textual-convention so that a manager
             may retrieve the offset from GMT time."
        ::= { schedObjects 1 }

    --
    -- The schedule table which controls the scheduler.
    --

    schedTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF SchedEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "This table defines scheduled actions triggered by
             SNMP set operations."
        ::= { schedObjects 2 }

    schedEntry OBJECT-TYPE
        SYNTAX      SchedEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "An entry describing a particular scheduled action."
        INDEX { schedOwner, schedName }
        ::= { schedTable 1 }

    SchedEntry ::= SEQUENCE {
        schedOwner          SnmpAdminString,
        schedName           SnmpAdminString,
        schedDescr          SnmpAdminString,
        schedInterval       Unsigned32,
        schedWeekDay        BITS,
        schedMonth          BITS,
        schedDay            BITS,
        schedHour           BITS,
        schedMinute         BITS,
        schedContextName    SnmpAdminString,
        schedVariable       VariablePointer,
        schedValue          Integer32,
        schedType           INTEGER,
        schedAdminStatus    INTEGER,
        schedOperStatus     INTEGER,
        schedFailures       Counter32,
        schedLastFailure    SnmpPduErrorStatus,
        schedLastFailed     DateAndTime,
        schedStorageType    StorageType,
        schedRowStatus      RowStatus
    }

    schedOwner OBJECT-TYPE
        SYNTAX      SnmpAdminString (SIZE(0..32))
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "The owner of this scheduling entry. The exact semantics of
             this string are subject to the security policy defined by
             the security administrator."
        ::= { schedEntry 1 }

    schedName OBJECT-TYPE
        SYNTAX      SnmpAdminString (SIZE(1..32))
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "The locally-unique, administratively assigned name for this
             scheduling entry. This object allows a schedOwner to have
             multiple entries in the schedTable."
        ::= { schedEntry 2 }

    schedDescr OBJECT-TYPE
        SYNTAX      SnmpAdminString
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The human readable description of the purpose of this
             scheduling entry."
        DEFVAL { ''H }
        ::= { schedEntry 3 }

    schedInterval OBJECT-TYPE
        SYNTAX      Unsigned32
        UNITS       "seconds"
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The number of seconds between two action invocations of
             a periodic scheduler. Implementations must guarantee
             that action invocations will not occur before at least
             schedInterval seconds have passed.

             The scheduler must ignore all periodic schedules that
             have a schedInterval value of 0. A periodic schedule
             with a scheduling interval of 0 seconds will therefore
             never invoke an action.

             Implementations may be forced to delay invocations in the
             face of local constraints. A scheduled management function
             should therefore not rely on the accuracy provided by the
             scheduler implementation."
        DEFVAL { 0 }
        ::= { schedEntry 4 }

    schedWeekDay OBJECT-TYPE
        SYNTAX      BITS {
                        sunday(0),
                        monday(1),
                        tuesday(2),
                        wednesday(3),
                        thursday(4),
                        friday(5),
                        saturday(6)
                    }
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The set of weekdays on which the scheduled action should
             take place. Setting multiple bits will include several
             weekdays in the set of possible weekdays for this schedule.
             Setting all bits will cause the scheduler to ignore the
             weekday."
        DEFVAL { {} }
        ::= { schedEntry 5 }

    schedMonth OBJECT-TYPE
        SYNTAX      BITS {
                        january(0),
                        february(1),
                        march(2),
                        april(3),
                        may(4),
                        june(5),
                        july(6),
                        august(7),
                        september(8),
                        october(9),
                        november(10),
                        december(11)
                    }
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The set of months during which the scheduled action should
             take place. Setting multiple bits will include several
             months in the set of possible months for this schedule.
             Setting all bits will cause the scheduler to ignore the
             month."
        DEFVAL { {} }
        ::= { schedEntry 6 }

    schedDay OBJECT-TYPE
        SYNTAX      BITS {
                        d1(0),   d2(1),   d3(2),   d4(3),   d5(4),
                        d6(5),   d7(6),   d8(7),   d9(8),   d10(9),
                        d11(10), d12(11), d13(12), d14(13), d15(14),
                        d16(15), d17(16), d18(17), d19(18), d20(19),
                        d21(20), d22(21), d23(22), d24(23), d25(24),
                        d26(25), d27(26), d28(27), d29(28), d30(29),
                        d31(30),
                        r1(31),  r2(32),  r3(33),  r4(34),  r5(35),
                        r6(36),  r7(37),  r8(38),  r9(39),  r10(40),
                        r11(41), r12(42), r13(43), r14(44), r15(45),
                        r16(46), r17(47), r18(48), r19(49), r20(50),
                        r21(51), r22(52), r23(53), r24(54), r25(55),
                        r26(56), r27(57), r28(58), r29(59), r30(60),
                        r31(61)
                    }
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The set of days in a month on which a scheduled action
             should take place. There are two sets of bits one can
             use to define the day within a month:

             Enumerations starting with the letter 'd' indicate a
             day in a month relative to the first day of a month.
             The first day of the month can therefore be specified
             by setting the bit d1(0) and d31(30) means the last
             day of a month with 31 days.

             Enumerations starting with the letter 'r' indicate a
             day in a month in reverse order, relative to the last
             day of a month. The last day in the month can therefore
             be specified by setting the bit r1(31) and r31(61) means
             the first day of a month with 31 days.

             Setting multiple bits will include several days in the set
             of possible days for this schedule. Setting all bits will
             cause the scheduler to ignore the day within a month.
             Setting all bits starting with the letter 'd' or the
             letter 'r' will also cause the scheduler to ignore the
             day within a month."
        DEFVAL { {} }
        ::= { schedEntry 7 }