rfc2020.mib

wm PNE 3.3 source code, running at more than vxworks6.x version.

      DOT12-IF-MIB DEFINITIONS ::= BEGIN

          IMPORTS
              transmission, Counter32, Counter64, OBJECT-TYPE,
              MODULE-IDENTITY
                  FROM SNMPv2-SMI
              MODULE-COMPLIANCE, OBJECT-GROUP
                  FROM SNMPv2-CONF
              ifIndex
                  FROM IF-MIB;

          dot12MIB MODULE-IDENTITY
               LAST-UPDATED "9602220452Z"  -- February 22, 1996
               ORGANIZATION "IETF 100VG-AnyLAN MIB Working Group"
               CONTACT-INFO
                       "       John Flick

                       Postal: Hewlett Packard Company
                               8000 Foothills Blvd. M/S 5556
                               Roseville, CA 95747-5556
                       Tel:    [phone]
                       Fax:    [phone]

                       E-mail: [e-mail]"
               DESCRIPTION
                       "This MIB module describes objects for
                       managing IEEE 802.12 interfaces."
               ::= { transmission 45 }

          dot12MIBObjects     OBJECT IDENTIFIER ::= { dot12MIB 1 }

          dot12ConfigTable OBJECT-TYPE
              SYNTAX     SEQUENCE OF Dot12ConfigEntry
              MAX-ACCESS not-accessible
              STATUS     current
              DESCRIPTION
                      "Configuration information for a collection of
                      802.12 interfaces attached to a particular
                      system."
              ::= { dot12MIBObjects 1 }

          dot12ConfigEntry OBJECT-TYPE
              SYNTAX     Dot12ConfigEntry
              MAX-ACCESS not-accessible
              STATUS     current
              DESCRIPTION
                      "Configuration for a particular interface to an
                      802.12 medium."
              INDEX      { ifIndex }
              ::= { dot12ConfigTable 1 }

          Dot12ConfigEntry ::=
              SEQUENCE {
                  dot12CurrentFramingType         INTEGER,
                  dot12DesiredFramingType         INTEGER,
                  dot12FramingCapability          INTEGER,
                  dot12DesiredPromiscStatus       INTEGER,
                  dot12TrainingVersion            INTEGER,
                  dot12LastTrainingConfig         OCTET STRING,
                  dot12Commands                   INTEGER,
                  dot12Status                     INTEGER,
                  dot12ControlMode                INTEGER
              }

          dot12CurrentFramingType OBJECT-TYPE
              SYNTAX     INTEGER {
                             frameType88023(1),
                             frameType88025(2),
                             frameTypeUnknown(3)
                         }
              MAX-ACCESS read-only
              STATUS     current
              DESCRIPTION
                      "When dot12DesiredFramingType is one of
                      'frameType88023' or 'frameType88025', this is the
                      type of framing asserted by the interface.

                      When dot12DesiredFramingType is 'frameTypeEither',
                      dot12CurrentFramingType shall be one of
                      'frameType88023' or 'frameType88025' when the
                      dot12Status is 'opened'.   When the dot12Status is
                      anything other than 'opened',
                      dot12CurrentFramingType shall take the value of
                      'frameTypeUnknown'."
              ::= { dot12ConfigEntry 1 }

          dot12DesiredFramingType OBJECT-TYPE
              SYNTAX     INTEGER {
                             frameType88023(1),
                             frameType88025(2),
                             frameTypeEither(3)
                         }
              MAX-ACCESS read-write
              STATUS     current
              DESCRIPTION
                      "The type of framing which will be requested by
                      the interface during the next interface MAC
                      initialization or open action.

                      In master mode, this is the framing mode which
                      will be granted by the interface.  Note that
                      for a master mode interface, this object must be
                      equal to 'frameType88023' or 'frameType88025',
                      since a master mode interface cannot grant
                      'frameTypeEither'."
              REFERENCE
                      "IEEE Standard 802.12-1995, 13.2.5.2.1,
                      aDesiredFramingType."
              ::= { dot12ConfigEntry 2 }

          dot12FramingCapability OBJECT-TYPE
              SYNTAX     INTEGER {
                             frameType88023(1),
                             frameType88025(2),
                             frameTypeEither(3)
                         }
              MAX-ACCESS read-only
              STATUS     current
              DESCRIPTION
                      "The type of framing this interface is capable of
                      supporting."
              REFERENCE
                      "IEEE Standard 802.12-1995, 13.2.5.2.1,
                      aFramingCapability."
              ::= { dot12ConfigEntry 3 }

          dot12DesiredPromiscStatus OBJECT-TYPE
              SYNTAX     INTEGER {
                             singleAddressMode(1),
                             promiscuousMode(2)
                         }
              MAX-ACCESS read-write
              STATUS     current
              DESCRIPTION
                      "This object is used to select the promiscuous
                      mode that this interface will request in the next
                      training packet issued on this interface.
                      Whether the repeater grants the requested mode
                      must be verified by examining the state of the PP
                      bits in the corresponding instance of
                      dot12LastTrainingConfig.
                      In master mode, this object controls whether or
                      not promiscuous mode will be granted by the
                      interface when requested by the lower level
                      device.

                      Note that this object indicates the desired mode
                      for the next time the interface trains.  The
                      currently active mode will be reflected in
                      dot12LastTrainingConfig and in ifPromiscuousMode."
              REFERENCE
                      "IEEE Standard 802.12-1995, 13.2.5.2.1,
                      aDesiredPromiscuousStatus."
              ::= { dot12ConfigEntry 4 }

          dot12TrainingVersion OBJECT-TYPE
              SYNTAX     INTEGER (0..7)
              MAX-ACCESS read-only
              STATUS     current
              DESCRIPTION
                      "The value that will be used in the version bits
                      (vvv bits) in training frames on this interface.
                      This is the highest version number supported by
                      this MAC."
              REFERENCE
                      "IEEE Standard 802.12-1995, 13.2.5.2.1,
                      aMACVersion."
              ::= { dot12ConfigEntry 5 }

          dot12LastTrainingConfig OBJECT-TYPE
              SYNTAX     OCTET STRING (SIZE(2))
              MAX-ACCESS read-only
              STATUS     current
              DESCRIPTION
                      "This 16 bit field contains the configuration
                      bits from the most recent error-free training
                      frame received during training on this interface.
                      Training request frames are received when in
                      master mode, while training response frames are
                      received in slave mode.  On master mode interfaces,
                      this object contains the contents of the
                      requested configuration field of the most recent
                      training request frame.  On slave mode interfaces,
                      this object contains the contents of the allowed
                      configuration field of the most recent training
                      response frame.  The format of the current version
                      of this field is described in section 3.8.  Please
                      refer to the most recent version of the IEEE
                      802.12 standard for the most up-to-date definition
                      of the format of this object."
              REFERENCE
                      "IEEE Standard 802.12-1995, 13.2.5.2.1,
                      aLastTrainingConfig."
              ::= { dot12ConfigEntry 6 }

          dot12Commands OBJECT-TYPE
              SYNTAX     INTEGER {
                             noOp(1),
                             open(2),
                             reset(3),
                             close(4)
                         }
              MAX-ACCESS read-write
              STATUS     current
              DESCRIPTION
                      "If the current value of dot12Status is 'closed',
                      setting the value of this object to 'open' will
                      change the corresponding instance of MIB-II's
                      ifAdminStatus to 'up', cause this interface to
                      enter the 'opening' state, and will cause training
                      to be initiated on this interface.  The progress
                      and success of the open is given by the values of
                      the dot12Status object.  Setting this object to
                      'open' when dot12Status has a value other than
                      'closed' has no effect.

                      Setting the corresponding instance of ifAdminStatus
                      to 'up' when the current value of dot12Status is
                      'closed' will have the same effect as setting this
                      object to 'open'.  Setting ifAdminStatus to 'up'
                      when dot12Status has a value other than 'closed'
                      has no effect.

                      Setting the value of this object to 'close' will
                      move this interface into the 'closed' state and
                      cause all transmit and receive actions to stop.
                      This object will then have to be set to 'open' in
                      order to reinitiate training.

                      Setting the corresponding instance of ifAdminStatus
                      to 'down' will have the same effect as setting this
                      object to 'close'.

                      Setting the value of this object to 'reset' when
                      the current value of dot12Status has a value other
                      than 'closed' will reset the interface.  On a
                      reset, all MIB counters should retain their values.

                      This will cause the MAC to initiate an
                      acInitializeMAC action as specified in IEEE 802.12.
                      This will cause training to be reinitiated on this
                      interface.  Setting this object to 'reset' when
                      dot12Status has a value of 'closed' has no effect.
                      Setting this object to 'reset' has no effect on the
                      corresponding instance of ifAdminStatus.

                      Setting the value of this object to 'noOp' has no
                      effect.

                      When read, this object will always have a value
                      of 'noOp'."
              REFERENCE
                      "IEEE Standard 802.12-1995, 13.2.5.2.2,
                      acOpen, acClose, acInitializeMAC.
                      Also, RFC1231 IEEE802.5 Token Ring MIB,
                      dot5Commands."