rfc2249.mib

wm PNE 3.3 source code, running at more than vxworks6.x version.

      {applTCPProtoID port} or {applUDProtoID port} are used for
      TCP-based and UDP-based protocols, respectively.  In either
      case 'port' corresponds to the primary port number being
      used by the group.  applTCPProtoID and applUDPProtoID are
      defined in [8]."
    ::= {mtaGroupEntry 24}

mtaGroupName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "A descriptive name for the group. If this group connects to
       a single remote MTA this should be the name of that MTA. If
       this in turn is an Internet MTA this should be the domain
       name.  For an OSI MTA it should be the string encoded
       distinguished name of the managed object using the format
       defined in RFC 1779 [9]. For X.400(1984) MTAs which do not
       have a Distinguished Name, the RFC 1327 [12] syntax
       'mta in globalid' should be used."
    ::= {mtaGroupEntry 25}

mtaGroupSuccessfulConvertedMessages OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "The number of messages that have been successfully
       converted from one form to another in this group
       since group creation."
    ::= {mtaGroupEntry 26}

mtaGroupFailedConvertedMessages OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "The number of messages for which an unsuccessful
       attempt was made to convert them from one form to
       another in this group since group creation."
    ::= {mtaGroupEntry 27}

mtaGroupDescription OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "A description of the group's purpose.  This information is
       intended to identify the group in a status display."
    ::= {mtaGroupEntry 28}

mtaGroupURL OBJECT-TYPE
    SYNTAX URLString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "A URL pointing to a description of the group.  This
       information is intended to identify and briefly describe
       the group in a status display."
    ::= {mtaGroupEntry 29}

mtaGroupCreationTime OBJECT-TYPE
    SYNTAX TimeInterval
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Time since this group was first created."
    ::= {mtaGroupEntry 30}

mtaGroupHierarchy OBJECT-TYPE
    SYNTAX INTEGER (-2147483648..2147483647)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Describes how this group fits into the hierarchy. A
       positive value is interpreted as an mtaGroupIndex
       value for some other group whose variables include
       those of this group (and usually others). A negative
       value is interpreted as a group collection code: Groups
       with common negative hierarchy values comprise one
       particular breakdown of MTA activity as a whole. A
       zero value means that this MIB implementation doesn't
       implement hierarchy indicators and thus the overall
       group hierarchy cannot be determined."
    ::= {mtaGroupEntry 31}

mtaGroupOldestMessageId OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Message ID of the oldest message in the group's queue.
       Whenever possible this should be in the form of an
       RFC 822 [13] msg-id; X.400 may convert X.400 message
       identifiers to this form by following the rules laid
       out in RFC1327 [12]."
    ::= {mtaGroupEntry 32}

mtaGroupLoopsDetected OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "A message loop is defined as a situation where the MTA
       decides that a given message will never be delivered to
       one or more recipients and instead will continue to
       loop endlessly through one or more MTAs.  This variable
       counts the number of times the MTA has detected such a
       situation in conjunction with something associated with
       this group since group creation.  Note that the
       mechanism MTAs use to detect loops (e.g. trace field
       counting, count of references to this MTA in a trace
       field, examination of DNS or other directory information,
       etc.), the level at which loops are detected (e.g. per
       message, per recipient, per directory entry, etc.), and
       the handling of a loop once it is detected (e.g. looping
       messages are held, looping messages are bounced or sent
       to the postmaster, messages that the MTA knows will loop
       won't be accepted, etc.) vary widely from one MTA to the
       next and cannot be inferred from this variable."
    ::= {mtaGroupEntry 33}

-- The mtaGroupAssociationTable provides a means of correlating
-- entries in the network services association table with the
-- MTA group responsible for the association.


mtaGroupAssociationTable OBJECT-TYPE
    SYNTAX SEQUENCE OF MtaGroupAssociationEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table holding information regarding the associations
       for each MTA group."
    ::= {mta 3}

mtaGroupAssociationEntry OBJECT-TYPE
    SYNTAX MtaGroupAssociationEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The entry holding information regarding the associations
       for each MTA group."
    INDEX {applIndex, mtaGroupIndex, mtaGroupAssociationIndex}
    ::= {mtaGroupAssociationTable 1}

MtaGroupAssociationEntry ::= SEQUENCE {
    mtaGroupAssociationIndex
        INTEGER
}

mtaGroupAssociationIndex OBJECT-TYPE
    SYNTAX INTEGER (1..2147483647)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Reference into association table to allow correlation of
       this group's active associations with the association table."
    ::= {mtaGroupAssociationEntry 1}

-- The mtaGroupErrorTable gives each group a way of tallying
-- the specific errors it has encountered.  The mechanism
-- defined here uses RFC 1893 [14] status codes to identify
-- various specific errors. There are also classes for generic
-- errors of various sorts, and the entire mechanism is also
-- extensible, in that new error codes can be defined at any
-- time.

mtaGroupErrorTable OBJECT-TYPE
    SYNTAX SEQUENCE OF MtaGroupErrorEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The table holding information regarding accumulated errors
       for each MTA group."
    ::= {mta 5}

mtaGroupErrorEntry OBJECT-TYPE
    SYNTAX MtaGroupErrorEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
      "The entry holding information regarding accumulated
       errors for each MTA group."
    INDEX {applIndex, mtaGroupIndex, mtaStatusCode}
    ::= {mtaGroupErrorTable 1}

MtaGroupErrorEntry ::= SEQUENCE {
    mtaGroupInboundErrorCount
        Counter32,
    mtaGroupInternalErrorCount
        Counter32,
    mtaGroupOutboundErrorCount
        Counter32
}

mtaGroupInboundErrorCount OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Count of the number of errors of a given type that have
       been accumulated in assocation with a particular group
       while processing incoming messages. In the case of SMTP
       these will typically be errors reporting by an SMTP
       server to the remote client; in the case of X.400
       these will typically be errors encountered while
       processing an incoming message."
    ::= {mtaGroupErrorEntry 1}


mtaGroupInternalErrorCount OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Count of the number of errors of a given type that have
       been accumulated in assocation with a particular group
       during internal MTA processing."
    ::= {mtaGroupErrorEntry 2}

mtaGroupOutboundErrorCount OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
      "Count of the number of errors of a given type that have
       been accumulated in assocation with a particular group's
       outbound connection activities. In the case of an SMTP
       client these will typically be errors reported while
       attempting to contact or while communicating with the
       remote SMTP server. In the case of X.400 these will
       typically be errors encountered while constructing
       or attempting to deliver an outgoing message."
    ::= {mtaGroupErrorEntry 3}

-- Conformance information

mtaConformance OBJECT IDENTIFIER ::= {mta 4}

mtaGroups      OBJECT IDENTIFIER ::= {mtaConformance 1}
mtaCompliances OBJECT IDENTIFIER ::= {mtaConformance 2}

-- Compliance statements

mtaCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION
      "The compliance statement for SNMPv2 entities which
       implement the Mail Monitoring MIB for basic
       monitoring of MTAs."
    MODULE  -- this module
      MANDATORY-GROUPS {mtaGroup}
    ::= {mtaCompliances 1}

mtaAssocCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION
      "The compliance statement for SNMPv2 entities which
       implement the Mail Monitoring MIB for monitoring of
       MTAs and their associations."
    MODULE  -- this module
      MANDATORY-GROUPS {mtaGroup, mtaAssocGroup}
    ::= {mtaCompliances 2}

mtaErrorCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION
      "The compliance statement for SNMPv2 entities which
       implement the Mail Monitoring MIB for monitoring of
       MTAs and detailed errors."
    MODULE  -- this module
      MANDATORY-GROUPS {mtaGroup, mtaErrorGroup}
    ::= {mtaCompliances 3}

mtaFullCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION
      "The compliance statement for SNMPv2 entities which
       implement the full Mail Monitoring MIB for monitoring
       of MTAs, associations, and detailed errors."
    MODULE  -- this module
      MANDATORY-GROUPS {mtaGroup, mtaAssocGroup, mtaErrorGroup}
    ::= {mtaCompliances 4}

-- Units of conformance

mtaGroup OBJECT-GROUP
    OBJECTS {
      mtaReceivedMessages, mtaStoredMessages,
      mtaTransmittedMessages, mtaReceivedVolume, mtaStoredVolume,
      mtaTransmittedVolume, mtaReceivedRecipients,
      mtaStoredRecipients, mtaTransmittedRecipients,
      mtaSuccessfulConvertedMessages, mtaFailedConvertedMessages,
      mtaGroupReceivedMessages, mtaGroupRejectedMessages,
      mtaGroupStoredMessages, mtaGroupTransmittedMessages,
      mtaGroupReceivedVolume, mtaGroupStoredVolume,
      mtaGroupTransmittedVolume, mtaGroupReceivedRecipients,
      mtaGroupStoredRecipients, mtaGroupTransmittedRecipients,
      mtaGroupOldestMessageStored, mtaGroupInboundAssociations,
      mtaGroupOutboundAssociations, mtaLoopsDetected,
      mtaGroupAccumulatedInboundAssociations,
      mtaGroupAccumulatedOutboundAssociations,
      mtaGroupLastInboundActivity, mtaGroupLastOutboundActivity,
      mtaGroupLastOutboundAssociationAttempt,
      mtaGroupRejectedInboundAssociations,
      mtaGroupFailedOutboundAssociations,
      mtaGroupInboundRejectionReason,
      mtaGroupOutboundConnectFailureReason,
      mtaGroupScheduledRetry, mtaGroupMailProtocol, mtaGroupName,
      mtaGroupSuccessfulConvertedMessages,
      mtaGroupFailedConvertedMessages, mtaGroupDescription,
      mtaGroupURL, mtaGroupCreationTime, mtaGroupHierarchy,
      mtaGroupOldestMessageId, mtaGroupLoopsDetected}
    STATUS current
    DESCRIPTION
      "A collection of objects providing basic monitoring of MTAs."
    ::= {mtaGroups 1}

mtaAssocGroup OBJECT-GROUP
    OBJECTS {
      mtaGroupAssociationIndex}
    STATUS current
    DESCRIPTION
      "A collection of objects providing monitoring of MTA
       associations."
    ::= {mtaGroups 2}

mtaErrorGroup OBJECT-GROUP
    OBJECTS {
      mtaGroupInboundErrorCount, mtaGroupInternalErrorCount,
      mtaGroupOutboundErrorCount}
    STATUS current
    DESCRIPTION
      "A collection of objects providing monitoring of
       detailed MTA errors."
    ::= {mtaGroups 3}

END