rfc2789.mib

wm PNE 3.3 source code, running at more than vxworks6.x version.

      mtaGroupRejectedInboundAssociations
          Counter32,
      mtaGroupFailedOutboundAssociations
          Counter32,
      mtaGroupInboundRejectionReason
          SnmpAdminString,
      mtaGroupOutboundConnectFailureReason
          SnmpAdminString,
      mtaGroupScheduledRetry
          TimeInterval,
      mtaGroupMailProtocol
          OBJECT IDENTIFIER,
      mtaGroupName
          SnmpAdminString,
      mtaGroupSuccessfulConvertedMessages
          Counter32,
      mtaGroupFailedConvertedMessages
          Counter32,
      mtaGroupDescription
          SnmpAdminString,
      mtaGroupURL
          URLString,
      mtaGroupCreationTime
          TimeInterval,
      mtaGroupHierarchy
          INTEGER,
      mtaGroupOldestMessageId
          SnmpAdminString,
      mtaGroupLoopsDetected
          Counter32
   }

   mtaGroupIndex OBJECT-TYPE
      SYNTAX INTEGER (1..2147483647)
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
        "The index associated with a group for a given MTA."
      ::= {mtaGroupEntry 1}

   mtaGroupReceivedMessages OBJECT-TYPE
      SYNTAX Counter32
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "The number of messages received to this group since
         group creation."
      ::= {mtaGroupEntry 2}

   mtaGroupRejectedMessages OBJECT-TYPE
      SYNTAX Counter32
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "The number of messages rejected by this group since
         group creation."
      ::= {mtaGroupEntry 3}

   mtaGroupStoredMessages OBJECT-TYPE
      SYNTAX Gauge32
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "The total number of messages currently stored in this
         group's queue."
      ::= {mtaGroupEntry 4}

   mtaGroupTransmittedMessages OBJECT-TYPE
      SYNTAX Counter32
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "The number of messages transmitted by this group since
         group creation."
      ::= {mtaGroupEntry 5}

   mtaGroupReceivedVolume OBJECT-TYPE
      SYNTAX Counter32
      UNITS "K-octets"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "The total volume of messages received to this group since
         group creation, measured in kilo-octets.  This volume
         should include all transferred data that is logically above
         the mail transport protocol level.  For example, an
         SMTP-based MTA should use the number of kilo-octets in the
         message header and body, while an X.400-based MTA should use
         the number of kilo-octets of P2 data."
      ::= {mtaGroupEntry 6}

   mtaGroupStoredVolume OBJECT-TYPE
      SYNTAX Gauge32
      UNITS "K-octets"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "The total volume of messages currently stored in this
         group's queue, measured in kilo-octets.  This volume should
         include all stored data that is logically above the mail
         transport protocol level.  For example, an SMTP-based
         MTA should use the number of kilo-octets in the message
         header and body, while an X.400-based MTA would use the
         number of kilo-octets of P2 data."
      ::= {mtaGroupEntry 7}

   mtaGroupTransmittedVolume OBJECT-TYPE
      SYNTAX Counter32
      UNITS "K-octets"
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "The total volume of messages transmitted by this group
         since group creation, measured in kilo-octets.  This
         volume should include all transferred data that is logically
         above the mail transport protocol level.  For example, an
         SMTP-based MTA should use the number of kilo-octets in the
         message header and body, while an X.400-based MTA should use
         the number of kilo-octets of P2 data."
      ::= {mtaGroupEntry 8}

   mtaGroupReceivedRecipients OBJECT-TYPE
      SYNTAX Counter32
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "The total number of recipients specified in all messages
         received to this group since group creation.
         Recipients this MTA has no responsibility for should not
         be counted."
      ::= {mtaGroupEntry 9}

   mtaGroupStoredRecipients OBJECT-TYPE
      SYNTAX Gauge32
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "The total number of recipients specified in all messages
         currently stored in this group's queue.  Recipients this
         MTA has no responsibility for should not be counted."
      ::= {mtaGroupEntry 10}

   mtaGroupTransmittedRecipients OBJECT-TYPE
      SYNTAX Counter32
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "The total number of recipients specified in all messages
         transmitted by this group since group creation.
         Recipients this MTA had no responsibility for should not
         be counted."
      ::= {mtaGroupEntry 11}

   mtaGroupOldestMessageStored OBJECT-TYPE
      SYNTAX TimeInterval
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "Time since the oldest message in this group's queue was
         placed in the queue."
      ::= {mtaGroupEntry 12}

   mtaGroupInboundAssociations OBJECT-TYPE
      SYNTAX Gauge32
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "The number of current associations to the group, where the
         group is the responder."
      ::= {mtaGroupEntry 13}

   mtaGroupOutboundAssociations OBJECT-TYPE
      SYNTAX Gauge32
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "The number of current associations to the group, where the
        group is the initiator."
      ::= {mtaGroupEntry 14}

   mtaGroupAccumulatedInboundAssociations OBJECT-TYPE
      SYNTAX Counter32
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "The total number of associations to the group since
        group creation, where the MTA was the responder."
      ::= {mtaGroupEntry 15}

   mtaGroupAccumulatedOutboundAssociations OBJECT-TYPE
      SYNTAX Counter32
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "The total number of associations from the group since
         group creation, where the MTA was the initiator."
      ::= {mtaGroupEntry 16}

   mtaGroupLastInboundActivity OBJECT-TYPE
      SYNTAX TimeInterval
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "Time since the last time that this group had an active
        inbound association for purposes of message reception."
      ::= {mtaGroupEntry 17}

   mtaGroupLastOutboundActivity OBJECT-TYPE
      SYNTAX TimeInterval
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "Time since the last time that this group had a
         successful outbound association for purposes of
         message delivery."
      ::= {mtaGroupEntry 18}

   mtaGroupLastOutboundAssociationAttempt OBJECT-TYPE
      SYNTAX TimeInterval
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "Time since the last time that this group attempted
         to make an outbound association for purposes of
         message delivery."
      ::= {mtaGroupEntry 34}

   mtaGroupRejectedInboundAssociations OBJECT-TYPE
      SYNTAX Counter32
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "The total number of inbound associations the group has
        rejected, since group creation.  Rejected associations
        are not counted in the accumulated association totals."
      ::= {mtaGroupEntry 19}

   mtaGroupFailedOutboundAssociations OBJECT-TYPE
      SYNTAX Counter32
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "The total number associations where the group was the
        initiator and association establishment has failed,
        since group creation.  Failed associations are
        not counted in the accumulated association totals."
      ::= {mtaGroupEntry 20}

   mtaGroupInboundRejectionReason OBJECT-TYPE
      SYNTAX SnmpAdminString
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "The failure reason, if any, for the last association this
        group refused to respond to. If no association attempt
        has been made since the MTA was initialized the value
        should be 'never'."
      ::= {mtaGroupEntry 21}

   mtaGroupOutboundConnectFailureReason OBJECT-TYPE
      SYNTAX SnmpAdminString
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "The failure reason, if any, for the last association attempt
        this group initiated. If no association attempt has been
        made since the MTA was initialized the value should be
        'never'."
      ::= {mtaGroupEntry 22}

   mtaGroupScheduledRetry OBJECT-TYPE
      SYNTAX TimeInterval
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "The amount of time until this group is next scheduled to
         attempt to make an association."
      ::= {mtaGroupEntry 23}

   mtaGroupMailProtocol OBJECT-TYPE
      SYNTAX OBJECT IDENTIFIER
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "An identification of the protocol being used by this group.
         For an group employing OSI protocols, this will be the
         Application Context.    For Internet applications, OID
         values of the form {applTCPProtoID port} or {applUDPProtoID
         port} are used for TCP-based and UDP-based protocols,
         respectively. In either case 'port' corresponds to the
         primary port number being used by the protocol. The
         usual IANA procedures may be used to register ports for
         new protocols. applTCPProtoID and applUDPProtoID are
         defined in the NETWORK-SERVICES-MIB, RFC 2788."
      ::= {mtaGroupEntry 24}

   mtaGroupName OBJECT-TYPE
      SYNTAX SnmpAdminString
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "A descriptive name for the group. If this group connects to
         a single remote MTA this should be the name of that MTA. If
         this in turn is an Internet MTA this should be the domain
         name.  For an OSI MTA it should be the string encoded
         distinguished name of the managed object using the format
         defined in RFC 2253.  For X.400(1984) MTAs which do not
         have a Distinguished Name, the RFC 2156 syntax
         'mta in globalid' used in X400-Received: fields can be
         used."
      ::= {mtaGroupEntry 25}

   mtaGroupSuccessfulConvertedMessages OBJECT-TYPE
      SYNTAX Counter32
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "The number of messages that have been successfully
         converted from one form to another in this group
         since group creation."
      ::= {mtaGroupEntry 26}

   mtaGroupFailedConvertedMessages OBJECT-TYPE
      SYNTAX Counter32
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "The number of messages for which an unsuccessful
         attempt was made to convert them from one form to
         another in this group since group creation."
      ::= {mtaGroupEntry 27}

   mtaGroupDescription OBJECT-TYPE
      SYNTAX SnmpAdminString
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "A description of the group's purpose.  This information is
         intended to identify the group in a status display."
      ::= {mtaGroupEntry 28}

   mtaGroupURL OBJECT-TYPE
      SYNTAX URLString
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "A URL pointing to a description of the group.  This
         information is intended to identify and briefly describe
         the group in a status display."
      ::= {mtaGroupEntry 29}

   mtaGroupCreationTime OBJECT-TYPE
      SYNTAX TimeInterval
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "Time since this group was first created."
      ::= {mtaGroupEntry 30}

   mtaGroupHierarchy OBJECT-TYPE
      SYNTAX INTEGER (-2147483648..2147483647)
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "Describes how this group fits into the hierarchy. A
         positive value is interpreted as an mtaGroupIndex
         value for some other group whose variables include
         those of this group (and usually others). A negative
         value is interpreted as a group collection code: Groups
         with common negative hierarchy values comprise one
         particular breakdown of MTA activity as a whole. A
         zero value means that this MIB implementation doesn't
         implement hierarchy indicators and thus the overall
         group hierarchy cannot be determined."
      ::= {mtaGroupEntry 31}

   mtaGroupOldestMessageId OBJECT-TYPE
      SYNTAX SnmpAdminString
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "Message ID of the oldest message in the group's queue.
         Whenever possible this should be in the form of an
         RFC 822 msg-id; X.400 may convert X.400 message
         identifiers to this form by following the rules laid
         out in RFC2156."
      ::= {mtaGroupEntry 32}

   mtaGroupLoopsDetected OBJECT-TYPE
      SYNTAX Counter32
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
        "A message loop is defined as a situation where the MTA
         decides that a given message will never be delivered to
         one or more recipients and instead will continue to
         loop endlessly through one or more MTAs.  This variable
         counts the number of times the MTA has detected such a
         situation in conjunction with something associated with
         this group since group creation.  Note that the
         mechanism MTAs use to detect loops (e.g., trace field
         counting, count of references to this MTA in a trace
         field, examination of DNS or other directory information,
         etc.), the level at which loops are detected (e.g., per
         message, per recipient, per directory entry, etc.), and
         the handling of a loop once it is detected (e.g., looping