rfc1595.mib

wm PNE 3.3 source code, running at more than vxworks6.x version.

          ::= { sonetVTCurrentEntry 6 }


          -- the SONET/SDH VT Interval Table

          -- The SONET/SDH VT Interval Table
          -- contains various statistics
          -- collected by each system over a maximum
          -- of the previous 24 hours of
          -- operation.  The past 24 hours may be broken into 96
          -- completed 15 minute intervals.
          -- A system is required to store at
          -- least 4 completed 15 minute interval.
          -- The default value is 32 intervals.

          sonetVTIntervalTable OBJECT-TYPE
              SYNTAX  SEQUENCE OF SonetVTIntervalEntry
              MAX-ACCESS  not-accessible
              STATUS  current
              DESCRIPTION
               "The SONET/SDH VT Interval table."
          ::= { sonetVT 2 }

          sonetVTIntervalEntry OBJECT-TYPE
              SYNTAX  SonetVTIntervalEntry
              MAX-ACCESS  not-accessible
              STATUS  current
              DESCRIPTION
               "An entry in the SONET/SDH VT Interval table."
              INDEX   { ifIndex,
                        sonetVTIntervalNumber }
          ::= { sonetVTIntervalTable 1 }

          SonetVTIntervalEntry ::=
              SEQUENCE {
                  sonetVTIntervalNumber     Integer32,
                  sonetVTIntervalESs        Gauge32,
                  sonetVTIntervalSESs       Gauge32,
                  sonetVTIntervalCVs        Gauge32,
                  sonetVTIntervalUASs       Gauge32
              }


          sonetVTIntervalNumber OBJECT-TYPE
              SYNTAX  Integer32 (1..96)
              MAX-ACCESS  not-accessible
              STATUS  current
              DESCRIPTION
                "A number between 1 and 96, which identifies the
                interval for which the set of statistics is available.
                The interval identified by 1 is the most recently
                completed 15 minute interval,
                and the interval identified
                by N is the interval immediately preceding the
                one identified
                by N-1."
          ::= { sonetVTIntervalEntry 1 }

          sonetVTIntervalESs OBJECT-TYPE
              SYNTAX  Gauge32
              MAX-ACCESS  read-only
              STATUS  current
              DESCRIPTION
               "The counter associated with the number of
               Errored Seconds encountered
               by a SONET/SDH VT in a particular 15-minute interval
               in the past 24 hours."
          ::= { sonetVTIntervalEntry 2 }

          sonetVTIntervalSESs OBJECT-TYPE
              SYNTAX  Gauge32
              MAX-ACCESS  read-only
              STATUS  current
              DESCRIPTION
               "The counter associated with the number of
               Severely Errored Seconds
               encountered by a SONET/SDH VT
               in a particular 15-minute interval
               in the past 24 hours."
          ::= { sonetVTIntervalEntry 3 }

          sonetVTIntervalCVs OBJECT-TYPE
              SYNTAX  Gauge32
              MAX-ACCESS  read-only
              STATUS  current
              DESCRIPTION
               "The counter associated with the number of Coding
               Violations encountered by a
               SONET/SDH VT in a particular 15-minute interval
               in the past 24 hours."
          ::= { sonetVTIntervalEntry 4 }

          sonetVTIntervalUASs OBJECT-TYPE
              SYNTAX  Gauge32
              MAX-ACCESS  read-only
              STATUS  current
              DESCRIPTION
               "The counter associated with the number of
               Unavailable Seconds
               encountered by a VT in a particular 15-minute interval
               in the past 24 hours."
          ::= { sonetVTIntervalEntry 5 }


          -- The SONET/SDH Far End VT group

          -- This group consists of two tables:
          --    SONET/SDH Far End VT Current Table
          --    SONET/SDH Far End VT Interval Table


          -- The SONET/SDH Far End VT Current

          -- The SONET/SDH Far End VT Current table
          -- contains various statistics
          -- being collected for the current 15 minute interval.
          -- The statistics are collected from
          -- the far end block error code
          -- (FEBE) within the G1 byte of the VT Overhead.
          -- The definitions are the same as described for
          -- the near-end information.

          sonetFarEndVTCurrentTable OBJECT-TYPE
              SYNTAX  SEQUENCE OF SonetFarEndVTCurrentEntry
              MAX-ACCESS  not-accessible
              STATUS  current
              DESCRIPTION
                  "The SONET/SDH Far End VT Current table."
              ::= { sonetFarEndVT 1 }

          sonetFarEndVTCurrentEntry OBJECT-TYPE
              SYNTAX  SonetFarEndVTCurrentEntry
              MAX-ACCESS  not-accessible
              STATUS  current
              DESCRIPTION
                  "An entry in the SONET/SDH Far End VT Current table."
              INDEX   { ifIndex }
              ::= { sonetFarEndVTCurrentTable 1 }

          SonetFarEndVTCurrentEntry ::=
              SEQUENCE {
                  sonetFarEndVTCurrentESs       Gauge32,
                  sonetFarEndVTCurrentSESs      Gauge32,
                  sonetFarEndVTCurrentCVs       Gauge32,
                  sonetFarEndVTCurrentUASs      Gauge32
              }


          sonetFarEndVTCurrentESs OBJECT-TYPE
              SYNTAX  Gauge32
              MAX-ACCESS  read-only
              STATUS  current
              DESCRIPTION
                  "The counter associated with the number of Far
                  Far End Errored Seconds encountered by a SONET/SDH
                  interface in the current 15 minute interval."
          ::= { sonetFarEndVTCurrentEntry 1 }

          sonetFarEndVTCurrentSESs OBJECT-TYPE
              SYNTAX  Gauge32
              MAX-ACCESS  read-only
              STATUS  current
              DESCRIPTION
                  "The counter associated with the number of
                  Far End Severely Errored Seconds
                  encountered by a SONET/SDH VT interface
                  in the current 15 minute
                  interval."
              ::= { sonetFarEndVTCurrentEntry 2 }

          sonetFarEndVTCurrentCVs OBJECT-TYPE
              SYNTAX  Gauge32
              MAX-ACCESS  read-only
              STATUS  current
              DESCRIPTION
                  "The counter associated with the number of
                  Far End Coding Violations reported via
                  the far end block error count
                  encountered by a
                  SONET/SDH VT interface
                  in the current 15 minute interval."
              ::= { sonetFarEndVTCurrentEntry 3 }

          sonetFarEndVTCurrentUASs OBJECT-TYPE
             SYNTAX  Gauge32
             MAX-ACCESS  read-only
             STATUS  current
             DESCRIPTION
                "The counter associated with the number of
                Far End Unavailable Seconds
                encountered by a
                SONET/SDH VT interface
                in the current 15 minute interval."
             ::= { sonetFarEndVTCurrentEntry 4 }


          -- The SONET/SDH Far End VT Interval Table

          -- The SONET/SDH Far End VT Interval Table
          -- contains various statistics
          -- collected by each system over a maximum
          -- of the previous 24 hours of
          -- operation.  The past 24 hours may be broken into 96
          -- completed 15 minute intervals.
          -- A system is required to store at
          -- least 4 completed 15 minute interval.
          -- The default value is 32 intervals.

          sonetFarEndVTIntervalTable OBJECT-TYPE
              SYNTAX  SEQUENCE OF SonetFarEndVTIntervalEntry
              MAX-ACCESS  not-accessible
              STATUS  current
              DESCRIPTION
                 "The SONET/SDH Far End VT Interval table."
              ::= { sonetFarEndVT 2 }

          sonetFarEndVTIntervalEntry OBJECT-TYPE
              SYNTAX  SonetFarEndVTIntervalEntry
              MAX-ACCESS  not-accessible
              STATUS  current
              DESCRIPTION
                "An entry in the SONET/SDH Far
                End VT Interval table."
              INDEX   { ifIndex,
                        sonetFarEndVTIntervalNumber }
              ::= { sonetFarEndVTIntervalTable 1 }

          SonetFarEndVTIntervalEntry ::=
             SEQUENCE {
                   sonetFarEndVTIntervalNumber     Integer32,
                   sonetFarEndVTIntervalESs        Gauge32,
                   sonetFarEndVTIntervalSESs       Gauge32,
                   sonetFarEndVTIntervalCVs        Gauge32,
                   sonetFarEndVTIntervalUASs       Gauge32
              }


          sonetFarEndVTIntervalNumber OBJECT-TYPE
              SYNTAX  Integer32 (1..96)
              MAX-ACCESS  not-accessible
              STATUS  current
              DESCRIPTION
                 "A number between 1 and 96, which identifies the
                 interval for which the set of statistics is available.
                 The interval identified by 1 is the most recently
                 completed 15 minute interval,
                 and the interval identified
                 by N is the interval immediately preceding the
                 one identified
                 by N-1."
              ::= { sonetFarEndVTIntervalEntry 1 }

          sonetFarEndVTIntervalESs OBJECT-TYPE
              SYNTAX  Gauge32
              MAX-ACCESS  read-only
              STATUS  current
              DESCRIPTION
                    "The counter associated with the number of
                    Far End Errored Seconds encountered
                    by a SONET/SDH VT interface
                    in a particular 15-minute interval
                    in the past 24 hours."
             ::= { sonetFarEndVTIntervalEntry 2 }

          sonetFarEndVTIntervalSESs OBJECT-TYPE
              SYNTAX  Gauge32
              MAX-ACCESS  read-only
              STATUS  current
              DESCRIPTION
                    "The counter associated with the number of
                    Far End Severely Errored Seconds
                    encountered by a SONET/SDH VT interface
                    in a particular 15-minute interval
                    in the past 24 hours."
              ::= { sonetFarEndVTIntervalEntry 3 }

          sonetFarEndVTIntervalCVs OBJECT-TYPE
              SYNTAX  Gauge32
              MAX-ACCESS  read-only
              STATUS  current
              DESCRIPTION
                   "The counter associated with the number of
                   Far End Coding Violations reported via
                   the far end block error count
                   encountered by a
                   SONET/SDH VT interface in a
                   particular 15-minute interval
                   in the past 24 hours."
              ::= { sonetFarEndVTIntervalEntry 4 }

          sonetFarEndVTIntervalUASs OBJECT-TYPE
             SYNTAX  Gauge32
             MAX-ACCESS  read-only
             STATUS  current
             DESCRIPTION
                 "The counter associated with the number of
                 Far End Unavailable Seconds
                 encountered by a
                 SONET/SDH VT interface in a
                 particular 15-minute interval
                 in the past 24 hours."
             ::= { sonetFarEndVTIntervalEntry 5 }


          -- conformance information

          sonetConformance OBJECT IDENTIFIER ::= { sonetMIB 4 }

          sonetGroups      OBJECT IDENTIFIER ::= { sonetConformance 1 }
          sonetCompliances OBJECT IDENTIFIER ::= { sonetConformance 2 }


          -- compliance statements

          sonetCompliance MODULE-COMPLIANCE
              STATUS  current
              DESCRIPTION
                      "The compliance statement for SONET/SDH
                       interfaces."

              MODULE  -- this module
                  MANDATORY-GROUPS { sonetMediumStuff, sonetSectionStuff }

                  GROUP       sonetLineStuff
                  DESCRIPTION
                      "Implementation of this group is mandatory for all
                       SONET/SDH systems that terminate SONET/SDH Lines,
                       Paths or Virtual Tributaries."

                  GROUP       sonetFarEndLineStuff
                  DESCRIPTION
                      "Implementation of this group is optional for all
                       SONET/SDH systems that terminate SONET/SDH Lines,
                       Paths or Virtual Tributaries, and that
                       provide for a far end block error (FEBE)
                       information at the SONET/SDH Line Layer."

                  GROUP       sonetPathStuff
                  DESCRIPTION
                      "Implementation of this group is mandatory for all
                       SONET/SDH systems that terminate SONET/SDH
                       Paths or Virtual
                       Tributaries."

                  OBJECT      sonetPathWidth
                  MIN-ACCESS  read-onl