rfc1285.mib

wm PNE 3.3 source code, running at more than vxworks6.x version.

                      "ANSI { fddiPORT 12 }"
              ::= { snmpFddiPORTEntry 3 }

          snmpFddiPORTPCNeighbor OBJECT-TYPE
              SYNTAX  INTEGER { a(1), b(2), s(3), m(4), unknown(5) }
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The type (PC_Neighbor) of the remote PORT that is
                      determined in PC_Signaling in R_Val (1,2) (refer
                      to ANSI SMT 9.6.3.2)."
              REFERENCE
                      "ANSI { fddiPORT 13 }"
              ::= { snmpFddiPORTEntry 4 }

          snmpFddiPORTConnectionPolicies OBJECT-TYPE
              SYNTAX  INTEGER (0..7)
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      "A value that indicates the node's PORT policies.
                      Pc-MAC-LCT, Pc-MAC-Loop, and Pc-MAC-Placement
                      indicate how the respective PC Signaling
                      Capability flags should  be set (refer to ANSI SMT
                      9.4.3.2).

                      The value is a sum.  This value initially takes
                      the value zero, then for each PORT policy, 2
                      raised to a power is added to the sum.  The powers
                      are according to the following table:

                                    Policy   Power
                                Pc-MAC-LCT   0
                               Pc-MAC-Loop   1
                          Pc-MAC-Placement   2 "
              REFERENCE
                      "ANSI { fddiPORT 14 }"
              ::= { snmpFddiPORTEntry 5 }

          snmpFddiPORTRemoteMACIndicated OBJECT-TYPE
              SYNTAX  INTEGER { true(1), false(2) }
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The indication, in PC-Signaling that the remote
                      partner intends to place a MAC in the output token
                      PATH of this PORT.  Signaled as R_Val (9) (refer
                      to ANSI SMT 9.6.3.2)."
              REFERENCE
                      "ANSI { fddiPORT 15 }"
              ::= { snmpFddiPORTEntry 6 }

          snmpFddiPORTCEState OBJECT-TYPE
              SYNTAX  INTEGER {
                          ce0(1), -- Isolated
                          ce1(2), -- Insert_P
                          ce2(3), -- Insert_S
                          ce3(4), -- Insert_X
                          ce4(5)  -- Local
                      }
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "Indicates the current state of PORT's
                      Configuration Element (CE) (refer to ANSI 9.7.5).
                      Note that this value represents the Current Path
                      information for this PORT."
              REFERENCE
                      "ANSI { fddiPORT 16 }"
              ::= { snmpFddiPORTEntry 7 }

          snmpFddiPORTPathsRequested OBJECT-TYPE
              SYNTAX  INTEGER (0..15)
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      "A value that indicates the desired association(s)
                      of the port with a station PATH.  The 'Primary'
                      Path is the default.  The value of 'Secondary' is
                      only meaningful for S (slave) or M (master) PORT
                      PC-Types.  This value effects the setting of the
                      CF_Insert_S, and CF_Insert_L flags (refer to ANSI
                      Section 9.4.3).  If the 'Primary' PATH is present,
                      then the Primary PATH (the default PATH) is
                      selected.  If the 'Secondary' PATH is present and
                      the 'Primary' PATH is not present, then the
                      CF_Insert_S flag is set.  If the 'Local' PATH is
                      sent and neither the 'Primary' or 'Secondary'
                      PATHs are sent, then the CF_Insert_L flag is set.

                      The value is a sum.  This value initially takes
                      the value zero, then for each type of PATH
                      desired, 2 raised to a power is added to the sum.
                      The powers are according to the following table:

                               Path   Power
                            Primary   0
                          Secondary   1
                              Local   2
                           Isolated   3 "
              REFERENCE
                      "ANSI { fddiPORT 17 }"
              ::= { snmpFddiPORTEntry 8 }

          snmpFddiPORTMACPlacement OBJECT-TYPE
              SYNTAX  FddiResourceId -- INTEGER (0..65535)
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "Indicates the upstream MAC, if any, that is
                      associated with the PORT.  The value shall be zero
                      if there is no MAC associated with the PORT.
                      Otherwise, the value shall be equal to the value
                      of snmpFddiMACIndex associated with the MAC."
              REFERENCE
                      "ANSI { fddiPORT 18 }"
              ::= { snmpFddiPORTEntry 9 }

          snmpFddiPORTAvailablePaths OBJECT-TYPE
              SYNTAX  INTEGER (0..7)
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "A value that indicates the PATH types available
                      for M and S PORTs.

                      The value is a sum.  This value initially takes
                      the value zero, then for each type of PATH that
                      this port has available, 2 raised to a power is
                      added to the sum.  The powers are according to the
                      following table:

                               Path   Power
                            Primary   0
                          Secondary   1
                              Local   2 "
              REFERENCE
                      "ANSI { fddiPORT 19 }"
              ::= { snmpFddiPORTEntry 10 }

          snmpFddiPORTMACLoopTime OBJECT-TYPE
              SYNTAX  FddiTime
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      "Time for the optional MAC Local Loop, T_Next(9),
                      which is greater-than or equal-to 200 milliseconds
                      (refer to ANSI SMT 9.4.4.2.3)."
              REFERENCE
                      "ANSI { fddiPORT 21 }"
              ::= { snmpFddiPORTEntry 11 }

          snmpFddiPORTTBMax OBJECT-TYPE
              SYNTAX  FddiTime
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      "TB_Max (refer to ANSI SMT 9.4.4.2.1)."
              REFERENCE
                      "ANSI { fddiPORT 32 }"
              ::= { snmpFddiPORTEntry 12 }

          snmpFddiPORTBSFlag OBJECT-TYPE
              SYNTAX  INTEGER { true(1), false(2) }
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The Break State, BS_Flag (refer to ANSI SMT
                      9.4.3.4)."
              REFERENCE
                      "ANSI { fddiPORT 33 }"
              ::= { snmpFddiPORTEntry 13 }

          snmpFddiPORTLCTFailCts OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The count of the consecutive times the link
                      confidence test (LCT) has failed during connection
                      management (refer to ANSI 9.4.1)."
              REFERENCE
                      "ANSI { fddiPORT 42 }"
              ::= { snmpFddiPORTEntry 14 }

          snmpFddiPORTLerEstimate OBJECT-TYPE
              SYNTAX  INTEGER (4..15)
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "A long term average link error rate.  It ranges
                      from 10**-4 to 10**-15 and is reported as the
                      absolute value of the exponent of the estimate."
              REFERENCE
                      "ANSI { fddiPORT 51 }"
              ::= { snmpFddiPORTEntry 15 }

          snmpFddiPORTLemRejectCts OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "A link error monitoring count of the times that a
                      link has been rejected."
              REFERENCE
                      "ANSI { fddiPORT 52 }"
              ::= { snmpFddiPORTEntry 16 }

          snmpFddiPORTLemCts OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The aggregate link error monitor error count, set
                      to zero only on station power_up."
              REFERENCE
                      "ANSI { fddiPORT 53 }"
              ::= { snmpFddiPORTEntry 17 }

          snmpFddiPORTLerCutoff OBJECT-TYPE
              SYNTAX  INTEGER (4..15)
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      "The link error rate estimate at which a link
                      connection will be broken.  It ranges from 10**-4
                      to 10**-15 and is reported as the absolute value
                      of the exponent."
              REFERENCE
                      "ANSI { fddiPORT 58 }"
              ::= { snmpFddiPORTEntry 18 }

          snmpFddiPORTLerAlarm OBJECT-TYPE
              SYNTAX  INTEGER (4..15)
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      "The link error rate estimate at which a link
                      connection will generate an alarm.  It ranges from
                      10**-4 to 10**-15 and is reported as the absolute
                      value of the exponent of the estimate."
              REFERENCE
                      "ANSI { fddiPORT 59 }"
              ::= { snmpFddiPORTEntry 19 }

          snmpFddiPORTConnectState OBJECT-TYPE
              SYNTAX  INTEGER {
                          disabled(1),
                          connecting(2),
                          standby(3),
                          active(4)
                      }
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "An indication of the connect state of this PORT.
                      Basically, this gives a higher level view of the
                      state of the connection by grouping PCM states and
                      the PC-Withhold flag state.  The supported values
                      and their corresponding PCM states and PC-Withhold
                      condition, when relevant, are:
                        disabled: (PC0:Off, PC9:Maint)

                      connecting: (PC1(Break) || PC3 (Connect) || PC4
                      (Next)                 || PC5 (Signal) || PC6
                      (Join) || PC7 (Verify))             &&
                      (PC_Withhold = None)

                         standby: (NOT PC_Withhold == None)

                          active: (PC2:Trace || PC8:Active) "
              REFERENCE
                      "ANSI { fddiPORT 61 }"
              ::= { snmpFddiPORTEntry 20 }

          snmpFddiPORTPCMState OBJECT-TYPE
              SYNTAX  INTEGER {
                          pc0(1), -- Off
                          pc1(2), -- Break
                          pc2(3), -- Trace
                          pc3(4), -- Connect
                          pc4(5), -- Next
                          pc5(6), -- Signal
                          pc6(7), -- Join
                          pc7(8), -- Verify
                          pc8(9), -- Active
                          pc9(10) -- Maint
                      }
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "(refer to SMT 9.6.2)."
              REFERENCE
                      "ANSI { fddiPORT 62 }"
              ::= { snmpFddiPORTEntry 21 }

          snmpFddiPORTPCWithhold OBJECT-TYPE
              SYNTAX  INTEGER { none(1), m-m(2), other(3) }
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "PC_Withhold, (refer to ANSI SMT 9.4.1)."
              REFERENCE
                      "ANSI { fddiPORT 63 }"
              ::= { snmpFddiPORTEntry 22 }

          snmpFddiPORTLerCondition OBJECT-TYPE
              SYNTAX  INTEGER { true(1), false(2) }
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "This variable is set to true whenever LerEst