rfc1285.mib

wm PNE 3.3 source code, running at more than vxworks6.x version.

              ::= { snmpFddiMACEntry 1 }

          snmpFddiMACIndex OBJECT-TYPE
              SYNTAX  INTEGER (1..65535)
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "A unique value for each MAC on the managed
                      entity.  The MAC identified by a particular value
                      of this index is that identified by the same value
                      of an ifIndex object instance.  That is, if a MAC
                      is associated with the interface whose value of
                      ifIndex in the Internet-Standard MIB is equal to
                      5, then the value of snmpFddiMACIndex shall also
                      equal 5.  The value for each MAC must remain
                      constant at least from one re-initialization of
                      the entity's network management system to the next
                      re-initialization."
              ::= { snmpFddiMACEntry 2 }

          snmpFddiMACFrameStatusCapabilities OBJECT-TYPE
              SYNTAX  INTEGER (0..1799)
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "A value that indicates the MAC's bridge and end-
                      station capabilities for operating in a bridged
                      FDDI network.
                      The value is a sum.  This value initially takes
                      the value zero, then for each capability present,
                      2 raised to a power is added to the sum.  The
                      powers are according to the following table:


                           Capability    Power
                           FSC-Type0    0
                           -- MAC repeats A/C indicators as received on
                           -- copying with the intent to forward.

                           FSC-Type1    1
                           -- MAC sets C but not A on copying for
                           -- forwarding.

                           FSC-Type2    2
                           -- MAC resets C and sets A on C set and
                           -- A reset if the frame is not copied and the
                           -- frame was addressed to this MAC

                           FSC-Type0-programmable    8
                           -- Type0 capability is programmable

                           FSC-Type1-programmable    9
                           -- Type1 capability is programmable

                           FSC-Type2-programmable   10
                           -- Type2 capability is programmable
                      "
              REFERENCE
                      "ANSI { fddiMAC 11 }"
              ::= { snmpFddiMACEntry 3 }

          snmpFddiMACTMaxGreatestLowerBound OBJECT-TYPE
              SYNTAX  FddiTime
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      "The greatest lower bound of T_Max supported for
                      this MAC."
              REFERENCE
                      "ANSI { fddiMAC 13 }"
              ::= { snmpFddiMACEntry 4 }

          snmpFddiMACTVXGreatestLowerBound OBJECT-TYPE
              SYNTAX  FddiTime
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The greatest lower bound of TVX supported for
                      this MAC."
              REFERENCE
                      "ANSI { fddiMAC 14 }"
              ::= { snmpFddiMACEntry 5 }

          snmpFddiMACPathsAvailable OBJECT-TYPE
              SYNTAX  INTEGER (0..7)
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "A value that indicates the PATH types available
                      for this MAC.

                      The value is a sum.  This value initially takes
                      the value zero, then for each type of PATH that
                      this MAC has available, 2 raised to a power is
                      added to the sum.  The powers are according to the
                      following table:

                               Path   Power
                            Primary   0
                          Secondary   1
                              Local   2 "
              REFERENCE
                      "ANSI { fddiMAC 22 }"
              ::= { snmpFddiMACEntry 6 }

          snmpFddiMACCurrentPath OBJECT-TYPE
              SYNTAX  INTEGER {
                          unknown(1),
                          primary(2),
                          secondary(4),
                          local(8),
                          isolated(16)
                      }
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "Indicates the association of the MAC with a
                      station PATH."
              REFERENCE
                      "ANSI { fddiMAC 23 }"
              ::= { snmpFddiMACEntry 7 }

          snmpFddiMACUpstreamNbr OBJECT-TYPE
              SYNTAX  FddiMACLongAddressType -- OCTET STRING (SIZE (6))
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The MAC's upstream neighbor's long individual MAC
                      address.  It may be determined by the Neighbor
                      Information Frame protocol (refer to ANSI SMT
                      7.2.1).  The value shall be reported as '00 00 00
                      00 00 00' if it is unknown."
              REFERENCE
                      "ANSI { fddiMAC 24 }"
              ::= { snmpFddiMACEntry 8 }

          snmpFddiMACOldUpstreamNbr OBJECT-TYPE
              SYNTAX  FddiMACLongAddressType -- OCTET STRING (SIZE (6))
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The previous value of the MAC's upstream
                      neighbor's long individual MAC address.  It may be
                      determined by the Neighbor Information Frame
                      protocol (refer to ANSI SMT 7.2.1).  The value
                      shall be reported as '00 00 00 00 00 00' if it is
                      unknown."
              REFERENCE
                      "ANSI { fddiMAC 26 }"
              ::= { snmpFddiMACEntry 9 }

          snmpFddiMACDupAddrTest OBJECT-TYPE
              SYNTAX  INTEGER { none(1), pass(2), fail(3) }
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The Duplicate Address Test flag, Dup_Addr_Test
                      (refer to ANSI 8.3.1)."
              REFERENCE
                      "ANSI { fddiMAC 29 }"
              ::= { snmpFddiMACEntry 10 }

          snmpFddiMACPathsRequested OBJECT-TYPE
              SYNTAX  INTEGER
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      "A value that indicates PATH(s) desired for this
                      MAC.

                      The value is a sum which represents the individual
                      PATHs that are desired.  This value initially
                      takes the value zero, then for each type of PATH
                      that this node is, 2 raised to a power is added to
                      the sum.  The powers are according to the
                      following table:

                               Path   Power
                            Primary   0
                          Secondary   1
                              Local   2
                           Isolated   3

                      The precedence order is primary, secondary, local,
                      and then isolated if multiple PATHs are desired
                      are set."
              REFERENCE
                      "ANSI { fddiMAC 32 }"
              ::= { snmpFddiMACEntry 11 }

          snmpFddiMACDownstreamPORTType OBJECT-TYPE
              SYNTAX  INTEGER { a(1), b(2), s(3), m(4), unknown(5) }
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "Indicates the PC-Type of the first port that is
                      downstream of this MAC (the exit port)."
              REFERENCE
                      "ANSI { fddiMAC 33 }"
              ::= { snmpFddiMACEntry 12 }

          snmpFddiMACSMTAddress OBJECT-TYPE
              SYNTAX  FddiMACLongAddressType -- OCTET STRING (SIZE (6))
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The 48 bit individual address of the MAC used for
                      SMT frames."
              REFERENCE
                      "ANSI { fddiMAC 41 }"
              ::= { snmpFddiMACEntry 13 }

          snmpFddiMACTReq OBJECT-TYPE
              SYNTAX  FddiTime
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      "The value of T-Req (refer to ANSI MAC 2.2.1 and
                      ANSI MAC 7.3.5.2)."
              REFERENCE
                      "ANSI { fddiMAC 51 }"
              ::= { snmpFddiMACEntry 14 }

          snmpFddiMACTNeg OBJECT-TYPE
              SYNTAX  FddiTime
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The value of T-Neg (refer to ANSI MAC 2.2.1 and
                      ANSI MAC 7.3.5.2)."
              REFERENCE
                      "ANSI { fddiMAC 52 }"
              ::= { snmpFddiMACEntry 15 }

          snmpFddiMACTMax OBJECT-TYPE
              SYNTAX  FddiTime
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The value of T-Max (refer to ANSI MAC 2.2.1 and
                      ANSI MAC 7.3.5.2)."
              REFERENCE
                      "ANSI { fddiMAC 53 }"
              ::= { snmpFddiMACEntry 16 }

          snmpFddiMACTvxValue OBJECT-TYPE
              SYNTAX  FddiTime
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The value of TvxValue (refer to ANSI MAC 2.2.1
                      and ANSI MAC 7.3.5.2)."
              REFERENCE
                      "ANSI { fddiMAC 54 }"
              ::= { snmpFddiMACEntry 17 }

          snmpFddiMACTMin OBJECT-TYPE
              SYNTAX  FddiTime
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The value of T-Min (refer to ANSI MAC 2.2.1 and
                      ANSI MAC 7.3.5.2)."
              REFERENCE
                      "ANSI { fddiMAC 55 }"
              ::= { snmpFddiMACEntry 18 }

          snmpFddiMACCurrentFrameStatus OBJECT-TYPE
              SYNTAX  INTEGER (0..7)
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      "A value that indicates the MAC's operational
                      frame status setting functionality.

                      The value is a sum.  This value initially takes
                      the value zero, then for each functionality
                      present, 2 raised to a power is added to the sum.
                      The powers are according to the following table:

                          Functionality   Power
                              FSC-Type0   0
                              -- MAC repeats A/C indicators as received

                              FSC-Type1   1
                              -- MAC sets C but not A on copying for
                              -- forwarding

                              FSC-Type2   2
                              -- MAC resets C and sets A on C set and A
                              -- reset if frame is not copied
                      "
              REFERENCE
                      "ANSI { fddiMAC 63 }"
              ::= { snmpFddiMACEntry 19 }

          snmpFddiMACFrameCts OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "Frame_Ct (refer to ANSI MAC 2.2.1)."
              REFERENCE
                      "ANSI { fddiMAC 71 }"
              ::= { snmpFddiMACEntry 20 }

          snmpFddiMACErrorCts OBJECT-TYPE
              SYNTAX  Counter
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "Error_Ct (refer to ANSI MAC 2.2.1)."
              REFERENCE
                      "ANSI { fddiMAC 81 }"
              ::= { snmpFddiMACEntry 21 }