rfc1566.mib

wm PNE 3.3 source code, running at more than vxworks6.x version.

   MTA-MIB DEFINITIONS ::= BEGIN

   IMPORTS
       OBJECT-TYPE, Counter32, Gauge32, MODULE-IDENTITY
         FROM SNMPv2-SMI
       DisplayString, TimeInterval
         FROM SNMPv2-TC
       MODULE-COMPLIANCE, OBJECT-GROUP
         FROM SNMPv2-CONF
       mib-2
         FROM RFC1213-MIB
       applIndex
         FROM APPLICATION-MIB;

   mta MODULE-IDENTITY
       LAST-UPDATED "9311280000Z"
       ORGANIZATION "IETF Mail and Directory Management Working Group"
       CONTACT-INFO
         "        Ned Freed

          Postal: Innosoft International, Inc.
                  250 West First Street, Suite 240
                  Claremont, CA  91711
                  US

          Tel: [phone]
          Fax: [phone]

          E-Mail: [e-mail]"
       DESCRIPTION
         "The MIB module describing Message Transfer Agents (MTAs)"
       ::= { mib-2 28 }

   mtaTable OBJECT-TYPE
       SYNTAX SEQUENCE OF MtaEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
         "The table holding information specific to an MTA."
       ::= {mta 1}

   mtaEntry OBJECT-TYPE
       SYNTAX MtaEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
         "The entry associated with each MTA."
       INDEX {applIndex}
       ::= {mtaTable 1}

   MtaEntry ::= SEQUENCE {
       mtaReceivedMessages
         Counter32,
       mtaStoredMessages
         Gauge32,
       mtaTransmittedMessages
         Counter32,
       mtaReceivedVolume
         Counter32,
       mtaStoredVolume
         Gauge32,
       mtaTransmittedVolume
         Counter32,
       mtaReceivedRecipients
         Counter32,
       mtaStoredRecipients
         Gauge32,
       mtaTransmittedRecipients
         Counter32
   }

   mtaReceivedMessages OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "The number of messages received since MTA initialization."
       ::= {mtaEntry 1}

   mtaStoredMessages OBJECT-TYPE
       SYNTAX Gauge32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "The total number of messages currently stored in the MTA."
       ::= {mtaEntry 2}

   mtaTransmittedMessages OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "The number of messages transmitted since MTA initialization."
       ::= {mtaEntry 3}

   mtaReceivedVolume OBJECT-TYPE
       SYNTAX Counter32
       UNITS "K-octets"
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "The total volume of messages received since MTA
         initialization, measured in kilo-octets.  This volume should
         include all transferred data that is logically above the mail
         transport protocol level.  For example, an SMTP-based MTA
         should use the number of kilo-octets in the message header
         and body, while an X.400-based MTA should use the number of
         kilo-octets of P2 data."
       ::= {mtaEntry 4}

   mtaStoredVolume OBJECT-TYPE
       SYNTAX Gauge32
       UNITS "K-octets"
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "The total volume of messages currently stored in the MTA,
         measured in kilo-octets.  This volume should include all
         stored data that is logically above the mail transport
         protocol level.  For example, an SMTP-based MTA should
         use the number of kilo-octets in the message header and
         body, while an X.400-based MTA would use the number of
         kilo-octets of P2 data."
       ::= {mtaEntry 5}

   mtaTransmittedVolume OBJECT-TYPE
       SYNTAX Counter32
       UNITS "K-octets"
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "The total volume of messages transmitted since MTA
         initialization, measured in kilo-octets.  This volume should
         include all transferred data that is logically above the mail
         transport protocol level.  For example, an SMTP-based MTA
         should use the number of kilo-octets in the message header
         and body, while an X.400-based MTA should use the number of
         kilo-octets of P2 data."
       ::= {mtaEntry 6}

   mtaReceivedRecipients OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "The total number of recipients specified in all messages
         received since MTA initialization.  Recipients this MTA
         had no responsibility for should not be counted even if
         information about such recipients is available."
       ::= {mtaEntry 7}

   mtaStoredRecipients OBJECT-TYPE
       SYNTAX Gauge32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "The total number of recipients specified in all messages
         currently stored in the MTA.  Recipients this MTA had no
         responsibility for should not be counted."
       ::= {mtaEntry 8}

   mtaTransmittedRecipients OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "The total number of recipients specified in all messages
         transmitted since MTA initialization.  Recipients this MTA
         had no responsibility for should not be counted."
       ::= {mtaEntry 9}


   -- MTAs typically group inbound reception, queue storage, and
   -- outbound transmission in some way. In the most extreme case
   -- information will be maintained for each different entity that
   -- receives messages and for each entity the MTA stores messages for
   -- and delivers messages to.  Other MTAs may elect to treat all
   -- reception equally, all queue storage equally, all deliveries
   -- equally, or some combination of this.

   -- In any case, a grouping abstraction is an extremely useful for
   -- breaking down the activities of an MTA. For purposes of labelling
   -- this will be called a "group" in this MIB.
   -- Each group contains all the variables needed to monitor all aspects
   -- of an MTA's operation.  However, the fact that all groups contain
   -- all possible variables does not imply that all groups must use all
   -- possible variables. For example, a single group might be used to
   -- monitor only one kind of event (inbound processing, outbound
   -- processing, or storage). In this sort of configuration all unused
   -- counters would be inaccessible; e.g., returning either a
   -- noSuchName error (for an SNMPv1 get), or a noSuchInstance
   -- exception (for an SNMPv2 get).

   -- Groups are not necessarily mutually exclusive. A given event may
   -- be recorded by more than one group, a message may be seen as
   -- stored by more than one group, and so on.  Groups should be all
   -- inclusive, however: if groups are implemented all aspects of an
   -- MTA's operation should be registered in at least one group. This
   -- freedom lets implementors use different sets of groups to
   -- provide differents "views" of an MTA.

   -- The possibility of overlap between groups means that summing
   -- variables across groups may not produce values equal to those in
   -- the mtaTable. mtaTable should always provide accurate information
   -- about the MTA as a whole.

   -- The term "channel" is often used in MTA implementations; channels
   -- are usually, but not always, equivalent to a group. However,
   -- this MIB does not use the term "channel" because there is no
   -- requirement that an MTA supporting this MIB has to map its
   -- "channel" abstraction one-to-one onto the MIB's group abstration.

   mtaGroupTable OBJECT-TYPE
       SYNTAX SEQUENCE OF MtaGroupEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
         "The table holding information specific to each MTA group."
       ::= {mta 2}

   mtaGroupEntry OBJECT-TYPE
       SYNTAX MtaGroupEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
         "The entry associated with each MTA group."
       INDEX {applIndex, mtaGroupIndex}
       ::= {mtaGroupTable 1}

   MtaGroupEntry ::= SEQUENCE {
       mtaGroupIndex
           INTEGER,
       mtaGroupReceivedMessages
           Counter32,
       mtaGroupRejectedMessages
           Counter32,
       mtaGroupStoredMessages
           Gauge32,
       mtaGroupTransmittedMessages
           Counter32,
       mtaGroupReceivedVolume
           Counter32,
       mtaGroupStoredVolume
           Gauge32,
       mtaGroupTransmittedVolume
           Counter32,
       mtaGroupReceivedRecipients
           Counter32,
       mtaGroupStoredRecipients
           Gauge32,
       mtaGroupTransmittedRecipients
           Counter32,
       mtaGroupOldestMessageStored
           TimeInterval,
       mtaGroupInboundAssociations
           Gauge32,
       mtaGroupOutboundAssociations
           Gauge32,
       mtaGroupAccumulatedInboundAssociations
           Counter32,
       mtaGroupAccumulatedOutboundAssociations
           Counter32,
       mtaGroupLastInboundActivity
           TimeInterval,
       mtaGroupLastOutboundActivity
           TimeInterval,
       mtaGroupRejectedInboundAssociations
           Counter32,
       mtaGroupFailedOutboundAssociations
           Counter32,
       mtaGroupInboundRejectionReason
           DisplayString,
       mtaGroupOutboundConnectFailureReason
           DisplayString,
       mtaGroupScheduledRetry
           TimeInterval,
       mtaGroupMailProtocol
           OBJECT IDENTIFIER,
       mtaGroupName
           DisplayString
   }

   mtaGroupIndex OBJECT-TYPE
       SYNTAX INTEGER (1..2147483647)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
         "The index associated with a group for a given MTA."
       ::= {mtaGroupEntry 1}

   mtaGroupReceivedMessages OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "The number of messages received to this group since MTA
         initialization."
       ::= {mtaGroupEntry 2}

   mtaGroupRejectedMessages OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "The number of messages rejected by this group since MTA
         initialization."
       ::= {mtaGroupEntry 3}

   mtaGroupStoredMessages OBJECT-TYPE
       SYNTAX Gauge32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "The total number of messages currently stored in this
         group's queue."
       ::= {mtaGroupEntry 4}

   mtaGroupTransmittedMessages OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "The number of messages transmitted by this group since MTA
         initialization."
       ::= {mtaGroupEntry 5}