rfc2562.mib

wm PNE 3.3 source code, running at more than vxworks6.x version.

        The value of this object also defines the range of
        transaction response times counted in the
        Tn3270eRtDataBucket5Rts object: those greater than the
        value of this object."
      DEFVAL { 100 }
      ::= { tn3270eRtCollCtlEntry 11 }

  tn3270eRtCollCtlRowStatus  OBJECT-TYPE
      SYNTAX            RowStatus
      MAX-ACCESS        read-create
      STATUS            current
      DESCRIPTION
        "This object allows entries to be created and deleted
         in the tn3270eRtCollCtlTable.  An entry in this table
         is deleted by setting this object to destroy(6).
         Deleting an entry in this table has the side-effect
         of removing all entries from the tn3270eRtDataTable
         that are associated with the entry being deleted."
      ::= { tn3270eRtCollCtlEntry 12 }


  -- TN3270E Response Time Data Table

  tn3270eRtDataTable  OBJECT-TYPE
      SYNTAX       SEQUENCE OF Tn3270eRtDataEntry
      MAX-ACCESS   not-accessible
      STATUS       current
      DESCRIPTION
        "The response time data table.  Entries in this table are
         created based on entries in the tn3270eRtCollCtlTable."
      ::= { tn3270eRtObjects 2 }

  tn3270eRtDataEntry  OBJECT-TYPE
      SYNTAX        Tn3270eRtDataEntry
      MAX-ACCESS    not-accessible
      STATUS        current
      DESCRIPTION
        "Entries in this table are created based upon the
        tn3270eRtCollCtlTable.  When the corresponding
        tn3270eRtCollCtlType has aggregate(0) specified, a single
        entry is created in this table, with a tn3270eRtDataClientAddrType
        of unknown(0), a zero-length octet string value for
        tn3270eRtDataClientAddress, and a tn3270eRtDataClientPort value of
        0.  When aggregate(0) is not specified, a separate entry is
        created for each client in the group.

        Note that the following objects defined within an entry in this
        table can  wrap:
            tn3270eRtDataTotalRts
            tn3270eRtDataTotalIpRts
            tn3270eRtDataCountTrans
            tn3270eRtDataCountDrs
            tn3270eRtDataElapsRnTrpSq
            tn3270eRtDataElapsIpRtSq
            tn3270eRtDataBucket1Rts
            tn3270eRtDataBucket2Rts
            tn3270eRtDataBucket3Rts
            tn3270eRtDataBucket4Rts
            tn3270eRtDataBucket5Rts"
      INDEX {
         tn3270eSrvrConfIndex,      -- Server's local index
         tn3270eClientGroupName,    -- Collection target
         tn3270eRtDataClientAddrType,
         tn3270eRtDataClientAddress,
         tn3270eRtDataClientPort }
      ::= { tn3270eRtDataTable 1 }

  Tn3270eRtDataEntry ::= SEQUENCE {
         tn3270eRtDataClientAddrType        IANATn3270eAddrType,
         tn3270eRtDataClientAddress         IANATn3270eAddress,
         tn3270eRtDataClientPort            Unsigned32,
         tn3270eRtDataAvgRt                 Gauge32,
         tn3270eRtDataAvgIpRt               Gauge32,
         tn3270eRtDataAvgCountTrans         Gauge32,
         tn3270eRtDataIntTimeStamp          DateAndTime,
         tn3270eRtDataTotalRts              Counter32,
         tn3270eRtDataTotalIpRts            Counter32,
         tn3270eRtDataCountTrans            Counter32,
         tn3270eRtDataCountDrs              Counter32,
         tn3270eRtDataElapsRndTrpSq         Unsigned32,
         tn3270eRtDataElapsIpRtSq           Unsigned32,
         tn3270eRtDataBucket1Rts            Counter32,
         tn3270eRtDataBucket2Rts            Counter32,
         tn3270eRtDataBucket3Rts            Counter32,
         tn3270eRtDataBucket4Rts            Counter32,
         tn3270eRtDataBucket5Rts            Counter32,
         tn3270eRtDataRtMethod              INTEGER,
         tn3270eRtDataDiscontinuityTime     TimeStamp
     }

  tn3270eRtDataClientAddrType   OBJECT-TYPE
      SYNTAX    IANATn3270eAddrType
      MAX-ACCESS   not-accessible
      STATUS       current
      DESCRIPTION
        "Indicates the type of address represented by the value
        of tn3270eRtDataClientAddress.  The value unknown(0) is
        used if aggregate data is being collected for the client
        group."
      ::= { tn3270eRtDataEntry 1 }

  tn3270eRtDataClientAddress   OBJECT-TYPE
      SYNTAX    IANATn3270eAddress
      MAX-ACCESS   not-accessible
      STATUS       current
      DESCRIPTION
        "Contains the IP address of the TN3270 client being
        monitored.  A zero-length octet string is used if
        aggregate data is being collected for the client group."
      ::= { tn3270eRtDataEntry 2 }

  tn3270eRtDataClientPort   OBJECT-TYPE
      SYNTAX       Unsigned32(0..65535)
      MAX-ACCESS   not-accessible
      STATUS       current
      DESCRIPTION
        "Contains the client port number of the TN3270 client being
        monitored.  The value 0 is used if aggregate data is being
        collected for the client group, or if the
        tn3270eRtDataClientAddrType identifies an address type that
        does not support ports."
      ::= { tn3270eRtDataEntry 3 }

  tn3270eRtDataAvgRt OBJECT-TYPE
      SYNTAX       Gauge32
      UNITS        "tenths of seconds"
      MAX-ACCESS   read-only
      STATUS       current
      DESCRIPTION
        "The average total response time measured over the last
        collection interval."
      DEFVAL { 0 }
      ::= { tn3270eRtDataEntry 4 }

  tn3270eRtDataAvgIpRt OBJECT-TYPE
      SYNTAX       Gauge32
      UNITS        "tenths of seconds"
      MAX-ACCESS   read-only
      STATUS       current
      DESCRIPTION
        "The average IP response time measured over the last
        collection interval."
      DEFVAL { 0 }
      ::= { tn3270eRtDataEntry 5 }

  tn3270eRtDataAvgCountTrans   OBJECT-TYPE
      SYNTAX       Gauge32
      UNITS        "transactions"
      MAX-ACCESS   read-only
      STATUS       current
      DESCRIPTION
        "The sliding transaction count used for calculating the
        values of the tn3270eRtDataAvgRt and tn3270eRtDataAvgIpRt
        objects.  The actual transaction count is available in
        the tn3270eRtDataCountTrans object.

        The initial value of this object, before any averages have
        been calculated, is 0."
      ::= { tn3270eRtDataEntry 6 }

  tn3270eRtDataIntTimeStamp   OBJECT-TYPE
      SYNTAX       DateAndTime
      MAX-ACCESS   read-only
      STATUS       current
      DESCRIPTION
        "The date and time of the last interval that
        tn3270eRtDataAvgRt, tn3270eRtDataAvgIpRt, and
        tn3270eRtDataAvgCountTrans were calculated.

        Prior to the calculation of the first interval
        averages, this object returns the value
        0x0000000000000000000000.  When this value is
        returned, the remaining objects in the entry have
        no significance."
      ::= { tn3270eRtDataEntry 7 }

  tn3270eRtDataTotalRts   OBJECT-TYPE
      SYNTAX       Counter32
      UNITS        "tenths of seconds"
      MAX-ACCESS   read-only
      STATUS       current
      DESCRIPTION
        "The count of the total response times collected.

        A management application can detect discontinuities in this
        counter by monitoring the tn3270eRtDataDiscontinuityTime
        object."
      ::= { tn3270eRtDataEntry 8 }

  tn3270eRtDataTotalIpRts   OBJECT-TYPE
      SYNTAX       Counter32
      UNITS        "tenths of seconds"
      MAX-ACCESS   read-only
      STATUS       current
      DESCRIPTION
        "The count of the total IP-network response times
        collected.

        A management application can detect discontinuities in this
        counter by monitoring the tn3270eRtDataDiscontinuityTime
        object."
      ::= { tn3270eRtDataEntry 9 }

  tn3270eRtDataCountTrans   OBJECT-TYPE
      SYNTAX       Counter32
      UNITS        "transactions"
      MAX-ACCESS   read-only
      STATUS       current
      DESCRIPTION
        "The count of the total number of transactions detected.

        A management application can detect discontinuities in this
        counter by monitoring the tn3270eRtDataDiscontinuityTime
        object."
      ::= { tn3270eRtDataEntry 10 }

  tn3270eRtDataCountDrs   OBJECT-TYPE
      SYNTAX       Counter32
      UNITS        "definite responses"
      MAX-ACCESS   read-only
      STATUS       current
      DESCRIPTION
        "The count of the total number of definite responses
        detected.

        A management application can detect discontinuities in this
        counter by monitoring the tn3270eRtDataDiscontinuityTime
        object."
      ::= { tn3270eRtDataEntry 11 }

  tn3270eRtDataElapsRndTrpSq   OBJECT-TYPE
      SYNTAX       Unsigned32
      UNITS        "tenths of seconds squared"
      MAX-ACCESS   read-only
      STATUS       current
      DESCRIPTION
        "The sum of the elapsed round trip time squared.  The sum
        of the squares is kept in order to enable calculation of
        a variance."
      DEFVAL { 0 }
      ::= { tn3270eRtDataEntry 12 }

  tn3270eRtDataElapsIpRtSq   OBJECT-TYPE
      SYNTAX       Unsigned32
      UNITS        "tenths of seconds squared"
      MAX-ACCESS   read-only
      STATUS       current
      DESCRIPTION
        "The sum of the elapsed IP round trip time squared.
        The sum of the squares is kept in order to enable
        calculation of a variance."
      DEFVAL { 0 }
      ::= { tn3270eRtDataEntry 13 }

  tn3270eRtDataBucket1Rts   OBJECT-TYPE
      SYNTAX       Counter32
      MAX-ACCESS   read-only
      STATUS       current
      DESCRIPTION
        "The count of the response times falling into bucket 1.

        A management application can detect discontinuities in this
        counter by monitoring the tn3270eRtDataDiscontinuityTime
        object."
      ::= { tn3270eRtDataEntry 14 }

  tn3270eRtDataBucket2Rts   OBJECT-TYPE
      SYNTAX       Counter32
      MAX-ACCESS   read-only
      STATUS       current
      DESCRIPTION
        "The count of the response times falling into bucket 2.

        A management application can detect discontinuities in this
        counter by monitoring the tn3270eRtDataDiscontinuityTime
        object."
      ::= { tn3270eRtDataEntry 15 }

  tn3270eRtDataBucket3Rts   OBJECT-TYPE
      SYNTAX       Counter32
      MAX-ACCESS   read-only
      STATUS       current
      DESCRIPTION
        "The count of the response times falling into bucket 3.

        A management application can detect discontinuities in this
        counter by monitoring the tn3270eRtDataDiscontinuityTime
        object."
      ::= { tn3270eRtDataEntry 16 }

  tn3270eRtDataBucket4Rts  OBJECT-TYPE
      SYNTAX       Counter32
      MAX-ACCESS   read-only
      STATUS       current
      DESCRIPTION
        "The count of the response times falling into bucket 4.

        A management application can detect discontinuities in this