rfc2788.mib

wm PNE 3.3 source code, running at more than vxworks6.x version.

       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "The total number associations where the application entity
          is initiator and association establishment has failed,
          since application initialization.  Failed associations are
          not counted in the accumulated association totals."
       ::= {applEntry 15}

   applDescription OBJECT-TYPE
       SYNTAX SnmpAdminString
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "A text description of the application.  This information
          is intended to identify and briefly describe the
          application in a status display."
       ::= {applEntry 16}

   applURL OBJECT-TYPE
       SYNTAX URLString
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "A URL pointing to a description of the application.
          This information is intended to identify and describe
          the application in a status display."
       ::= {applEntry 17}

   -- The assocTable augments the information in the applTable
   -- with information about associations.  Note that two levels
   -- of compliance are specified below, depending on whether
   -- association monitoring is mandated.

   assocTable OBJECT-TYPE
       SYNTAX SEQUENCE OF AssocEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "The table holding a set of all active application
            associations."
       ::= {application 2}

   assocEntry OBJECT-TYPE
       SYNTAX AssocEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
         "An entry associated with an association for a network
          service application."
       INDEX {applIndex, assocIndex}
       ::= {assocTable 1}

   AssocEntry ::= SEQUENCE {
       assocIndex
           INTEGER,
       assocRemoteApplication
           SnmpAdminString,
       assocApplicationProtocol
           OBJECT IDENTIFIER,
       assocApplicationType
           INTEGER,
       assocDuration
           TimeStamp
   }

   assocIndex OBJECT-TYPE
       SYNTAX INTEGER (1..2147483647)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
         "An index to uniquely identify each association for a network
          service application.  This attribute is the index that is
          used for lexicographic ordering of the table.  Note that the
          table is also indexed by the applIndex."
       ::= {assocEntry 1}

   assocRemoteApplication OBJECT-TYPE
       SYNTAX SnmpAdminString
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "The name of the system running remote network service
          application.  For an IP-based application this should be
          either a domain name or IP address.  For an OSI application
          it should be the string encoded distinguished name of the
          managed object.  For X.400(1984) MTAs which do not have a
          Distinguished Name, the RFC 2156 syntax 'mta in
          globalid' used in X400-Received: fields can be used. Note,
          however, that not all connections an MTA makes are
          necessarily to another MTA."
       ::= {assocEntry 2}

   assocApplicationProtocol OBJECT-TYPE
       SYNTAX OBJECT IDENTIFIER
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "An identification of the protocol being used for the
          application.  For an OSI Application, this will be the
          Application Context.  For Internet applications, OID
          values of the form {applTCPProtoID port} or {applUDPProtoID
          port} are used for TCP-based and UDP-based protocols,
          respectively. In either case 'port' corresponds to the
          primary port number being used by the protocol. The
          usual IANA procedures may be used to register ports for
          new protocols."
       ::= {assocEntry 3}

   assocApplicationType OBJECT-TYPE
       SYNTAX INTEGER {
           uainitiator(1),
           uaresponder(2),
           peerinitiator(3),
           peerresponder(4)}
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "This indicates whether the remote application is some type of
          client making use of this network service (e.g., a Mail User
          Agent) or a server acting as a peer. Also indicated is whether
          the remote end initiated an incoming connection to the network
          service or responded to an outgoing connection made by the
          local application.  MTAs and messaging gateways are
          considered to be peers for the purposes of this variable."
       ::= {assocEntry 4}

   assocDuration OBJECT-TYPE
       SYNTAX TimeStamp
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "The value of sysUpTime at the time this association was
          started.  If this association started prior to the last
          initialization of the network subsystem, then this
          object contains a zero value."
       ::= {assocEntry 5}


   -- Conformance information

   applConformance OBJECT IDENTIFIER ::= {application 3}

   applGroups      OBJECT IDENTIFIER ::= {applConformance 1}
   applCompliances OBJECT IDENTIFIER ::= {applConformance 2}

   -- Compliance statements

   applCompliance MODULE-COMPLIANCE
       STATUS obsolete
       DESCRIPTION
         "The compliance statement for RFC 1565 implementations
          which support the Network Services Monitoring MIB
          for basic monitoring of network service applications.
          This is the basic compliance statement for RFC 1565."
       MODULE
         MANDATORY-GROUPS {applRFC1565Group}
       ::= {applCompliances 1}

   assocCompliance MODULE-COMPLIANCE
       STATUS obsolete
       DESCRIPTION
         "The compliance statement for RFC 1565 implementations
          which support the Network Services Monitoring MIB
          for basic monitoring of network service applications
          and their associations."
       MODULE
         MANDATORY-GROUPS {applRFC1565Group, assocRFC1565Group}
       ::= {applCompliances 2}

   applRFC2248Compliance MODULE-COMPLIANCE
       STATUS deprecated
       DESCRIPTION
         "The compliance statement for RFC 2248 implementations
          which support the Network Services Monitoring MIB
          for basic monitoring of network service applications."
       MODULE
         MANDATORY-GROUPS {applRFC2248Group}
       ::= {applCompliances 3}

   assocRFC2248Compliance MODULE-COMPLIANCE
       STATUS deprecated
       DESCRIPTION
         "The compliance statement for RFC 2248 implementations
          which support the Network Services Monitoring MIB for
          basic monitoring of network service applications and
          their associations."
       MODULE
         MANDATORY-GROUPS {applRFC2248Group, assocRFC2248Group}
       ::= {applCompliances 4}

   applRFC2788Compliance MODULE-COMPLIANCE
       STATUS current
       DESCRIPTION
         "The compliance statement for RFC 2788 implementations
          which support the Network Services Monitoring MIB
          for basic monitoring of network service applications."
       MODULE
         MANDATORY-GROUPS {applRFC2788Group}
       ::= {applCompliances 5}

   assocRFC2788Compliance MODULE-COMPLIANCE
       STATUS current
       DESCRIPTION
         "The compliance statement for RFC 2788 implementations
          which support the Network Services Monitoring MIB for
          basic monitoring of network service applications and
          their associations."
       MODULE
         MANDATORY-GROUPS {applRFC2788Group, assocRFC2788Group}
       ::= {applCompliances 6}


   -- Units of conformance

   applRFC1565Group OBJECT-GROUP
       OBJECTS {
         applName, applVersion, applUptime, applOperStatus,
         applLastChange, applInboundAssociations,
         applOutboundAssociations, applAccumulatedInboundAssociations,
         applAccumulatedOutboundAssociations, applLastInboundActivity,
         applLastOutboundActivity, applRejectedInboundAssociations,
         applFailedOutboundAssociations}
       STATUS obsolete
       DESCRIPTION
         "A collection of objects providing basic monitoring of
          network service applications.  This is the original set
          of such objects defined in RFC 1565."
       ::= {applGroups 7}

   assocRFC1565Group OBJECT-GROUP
       OBJECTS {
         assocRemoteApplication, assocApplicationProtocol,
         assocApplicationType, assocDuration}
       STATUS obsolete
       DESCRIPTION
         "A collection of objects providing basic monitoring of
          network service applications' associations.  This is the
          original set of such objects defined in RFC 1565."
       ::= {applGroups 2}

   applRFC2248Group OBJECT-GROUP
       OBJECTS {
         applName, applVersion, applUptime, applOperStatus,
         applLastChange, applInboundAssociations,
         applOutboundAssociations, applAccumulatedInboundAssociations,
         applAccumulatedOutboundAssociations, applLastInboundActivity,
         applLastOutboundActivity, applRejectedInboundAssociations,
         applFailedOutboundAssociations, applDescription, applURL}
       STATUS deprecated
       DESCRIPTION
         "A collection of objects providing basic monitoring of
          network service applications.  This group was originally
          defined in RFC 2248; note that applDirectoryName is
          missing."
       ::= {applGroups 3}

   assocRFC2248Group OBJECT-GROUP
       OBJECTS {
         assocRemoteApplication, assocApplicationProtocol,
         assocApplicationType, assocDuration}
       STATUS deprecated
       DESCRIPTION
         "A collection of objects providing basic monitoring of
          network service applications' associations.  This group
          was originally defined by RFC 2248."
       ::= {applGroups 4}

   applRFC2788Group OBJECT-GROUP
       OBJECTS {
         applName, applDirectoryName, applVersion, applUptime,
         applOperStatus, applLastChange, applInboundAssociations,
         applOutboundAssociations, applAccumulatedInboundAssociations,
         applAccumulatedOutboundAssociations, applLastInboundActivity,
         applLastOutboundActivity, applRejectedInboundAssociations,
         applFailedOutboundAssociations, applDescription, applURL}
       STATUS current
       DESCRIPTION
         "A collection of objects providing basic monitoring of
          network service applications.  This is the appropriate
          group for RFC 2788 -- it adds the applDirectoryName object
          missing in RFC 2248."
       ::= {applGroups 5}

   assocRFC2788Group OBJECT-GROUP
       OBJECTS {
         assocRemoteApplication, assocApplicationProtocol,
         assocApplicationType, assocDuration}
       STATUS current
       DESCRIPTION
         "A collection of objects providing basic monitoring of
          network service applications' associations.  This is
          the appropriate group for RFC 2788."
       ::= {applGroups 6}

   -- OIDs of the form {applTCPProtoID port} are intended to be used
   -- for TCP-based protocols that don't have OIDs assigned by other
   -- means. {applUDPProtoID port} serves the same purpose for
   -- UDP-based protocols. In either case 'port' corresponds to
   -- the primary port number being used by the protocol. For example,
   -- assuming no other OID is assigned for SMTP, an OID of
   -- {applTCPProtoID 25} could be used, since SMTP is a TCP-based
   -- protocol that uses port 25 as its primary port.

   applTCPProtoID OBJECT IDENTIFIER ::= {application 4}
   applUDPProtoID OBJECT IDENTIFIER ::= {application 5}
   END