rfc2788.mib

wm PNE 3.3 source code, running at more than vxworks6.x version.

   NETWORK-SERVICES-MIB DEFINITIONS ::= BEGIN

   IMPORTS
       OBJECT-TYPE, Counter32, Gauge32, MODULE-IDENTITY, mib-2
         FROM SNMPv2-SMI
       TimeStamp, TEXTUAL-CONVENTION
         FROM SNMPv2-TC
       MODULE-COMPLIANCE, OBJECT-GROUP
         FROM SNMPv2-CONF
       SnmpAdminString
           FROM SNMP-FRAMEWORK-MIB;

   application MODULE-IDENTITY
       LAST-UPDATED "200003030000Z"
       ORGANIZATION "IETF Mail and Directory Management Working Group"
       CONTACT-INFO
         "        Ned Freed

          Postal: Innosoft International, Inc.
                  1050 Lakes Drive
                  West Covina, CA 91790
                  US

             Tel: [phone]
             Fax: [phone]

          E-Mail: [e-mail]"
       DESCRIPTION
         "The MIB module describing network service applications"
       REVISION "200003030000Z"
       DESCRIPTION
         "This revision, published in RFC 2788, changes a number of
          DisplayStrings to SnmpAdminStrings. Note that this change
          is not strictly supported by SMIv2.  However, the alternative
          of deprecating the old objects and defining new objects
          would have a more adverse impact on backward compatibility
          and interoperability, given the particular semantics of
          these objects. The defining reference for distinguished
          names has also been updated from RFC 1779 to RFC 2253."
       REVISION "199905120000Z"
       DESCRIPTION
         "This revision fixes a few small technical problems found
          in previous versions, mostly in regards to the conformance
          groups for different versions of this MIB.  No changes have
          been made to the objects this MIB defines since RFC 2248."
       REVISION "199708170000Z"
       DESCRIPTION
         "This revision, published in RFC 2248, adds the
          applDescription and applURL objects, adds the quiescing
          state to the applOperStatus object and renames the MIB
          from the APPLICATION-MIB to the NETWORK-SERVICE-MIB."
       REVISION "199311280000Z"
       DESCRIPTION
         "The original version of this MIB was published in RFC 1565"
       ::= {mib-2 27}

   -- Textual conventions

   -- DistinguishedName is used to refer to objects in the
   -- directory.

   DistinguishedName ::= TEXTUAL-CONVENTION
       DISPLAY-HINT "255a"
       STATUS current
       DESCRIPTION
           "A Distinguished Name represented in accordance with
            RFC 2253, presented in the UTF-8 charset defined in
            RFC 2279."
       SYNTAX OCTET STRING (SIZE (0..255))

   -- Uniform Resource Locators are stored in URLStrings.

   URLString ::= TEXTUAL-CONVENTION
       DISPLAY-HINT "255a"
       STATUS current
       DESCRIPTION
           "A Uniform Resource Locator represented in accordance
            with RFCs 1738 and 2368, presented in the NVT ASCII
            charset defined in RFC 854."
       SYNTAX OCTET STRING (SIZE (0..255))

   -- The basic applTable contains a list of the application
   -- entities.

   applTable OBJECT-TYPE
       SYNTAX SEQUENCE OF ApplEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
           "The table holding objects which apply to all different
            kinds of applications providing network services.
            Each network service application capable of being
            monitored should have a single entry in this table."
       ::= {application 1}

   applEntry OBJECT-TYPE
       SYNTAX ApplEntry
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
         "An entry associated with a single network service
          application."
       INDEX {applIndex}
       ::= {applTable 1}

   ApplEntry ::= SEQUENCE {
       applIndex
           INTEGER,
       applName
           SnmpAdminString,
       applDirectoryName
           DistinguishedName,
       applVersion
           SnmpAdminString,
       applUptime
           TimeStamp,
       applOperStatus
           INTEGER,
       applLastChange
           TimeStamp,
       applInboundAssociations
           Gauge32,
       applOutboundAssociations
           Gauge32,
       applAccumulatedInboundAssociations
           Counter32,
       applAccumulatedOutboundAssociations
           Counter32,
       applLastInboundActivity
           TimeStamp,
       applLastOutboundActivity
           TimeStamp,
       applRejectedInboundAssociations
           Counter32,
       applFailedOutboundAssociations
           Counter32,
       applDescription
           SnmpAdminString,
       applURL
           URLString
   }

   applIndex OBJECT-TYPE
       SYNTAX INTEGER (1..2147483647)
       MAX-ACCESS not-accessible
       STATUS current
       DESCRIPTION
         "An index to uniquely identify the network service
          application. This attribute is the index used for
          lexicographic ordering of the table."
       ::= {applEntry 1}

   applName OBJECT-TYPE
       SYNTAX SnmpAdminString
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "The name the network service application chooses to be
          known by."
       ::= {applEntry 2}

   applDirectoryName OBJECT-TYPE
       SYNTAX DistinguishedName
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "The Distinguished Name of the directory entry where
          static information about this application is stored.
          An empty string indicates that no information about
          the application is available in the directory."
       ::= {applEntry 3}

   applVersion OBJECT-TYPE
       SYNTAX SnmpAdminString
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "The version of network service application software.
          This field is usually defined by the vendor of the
          network service application software."
       ::= {applEntry 4}
   applUptime OBJECT-TYPE
       SYNTAX TimeStamp
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "The value of sysUpTime at the time the network service
          application was last initialized.  If the application was
          last initialized prior to the last initialization of the
          network management subsystem, then this object contains
          a zero value."
       ::= {applEntry 5}

   applOperStatus OBJECT-TYPE
       SYNTAX INTEGER {
         up(1),
         down(2),
         halted(3),
         congested(4),
         restarting(5),
         quiescing(6)
       }
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "Indicates the operational status of the network service
          application. 'down' indicates that the network service is
          not available. 'up' indicates that the network service
          is operational and available.  'halted' indicates that the
          service is operational but not available.  'congested'
          indicates that the service is operational but no additional
          inbound associations can be accommodated.  'restarting'
          indicates that the service is currently unavailable but is
          in the process of restarting and will be available soon.
          'quiescing' indicates that service is currently operational
          but is in the process of shutting down. Additional inbound
          associations may be rejected by applications in the
          'quiescing' state."
       ::= {applEntry 6}

   applLastChange OBJECT-TYPE
       SYNTAX TimeStamp
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "The value of sysUpTime at the time the network service
          application entered its current operational state.  If
          the current state was entered prior to the last
          initialization of the local network management subsystem,
          then this object contains a zero value."
       ::= {applEntry 7}

   applInboundAssociations OBJECT-TYPE
       SYNTAX Gauge32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "The number of current associations to the network service
          application, where it is the responder.  An inbound
          association occurs when another application successfully
          connects to this one."
       ::= {applEntry 8}

   applOutboundAssociations OBJECT-TYPE
       SYNTAX Gauge32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "The number of current associations to the network service
          application, where it is the initiator.  An outbound
          association occurs when this application successfully
          connects to another one."
       ::= {applEntry 9}

   applAccumulatedInboundAssociations OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "The total number of associations to the application entity
          since application initialization, where it was the responder."
       ::= {applEntry 10}

   applAccumulatedOutboundAssociations OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "The total number of associations to the application entity
          since application initialization, where it was the initiator."
       ::= {applEntry 11}

   applLastInboundActivity OBJECT-TYPE
       SYNTAX TimeStamp
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "The value of sysUpTime at the time this application last
          had an inbound association.  If the last association
          occurred prior to the last initialization of the network
          subsystem, then this object contains a zero value."
       ::= {applEntry 12}

   applLastOutboundActivity OBJECT-TYPE
       SYNTAX TimeStamp
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "The value of sysUpTime at the time this application last
          had an outbound association.  If the last association
          occurred prior to the last initialization of the network
          subsystem, then this object contains a zero value."
       ::= {applEntry 13}

   applRejectedInboundAssociations OBJECT-TYPE
       SYNTAX Counter32
       MAX-ACCESS read-only
       STATUS current
       DESCRIPTION
         "The total number of inbound associations the application
          entity has rejected, since application initialization.
          Rejected associations are not counted in the accumulated
          association totals.  Note that this only counts
          associations the application entity has rejected itself;
          it does not count rejections that occur at lower layers
          of the network.  Thus, this counter may not reflect the
          true number of failed inbound associations."
       ::= {applEntry 14}

   applFailedOutboundAssociations OBJECT-TYPE