cygnalcon.h

uCos-ii 2.86 在C8051F410单片机上移植成功!!! 其中包括:UART驱动

#ifndef __CYGNALCON__
#define __CYGNALCON__



//-----------------------------------------------------------------------------
// 16-bit SFR Definitions for 'F06x
//-----------------------------------------------------------------------------	 


sfr16 RCAP2    = 0xca;                 // Timer2 capture/reload
sfr16 RCAP3    = 0xca;                 // Timer3 capture/reload
sfr16 RCAP4    = 0xca;                 // Timer4 capture/reload
sfr16 TMR2     = 0xcc;                 // Timer2
sfr16 TMR3     = 0xcc;                 // Timer3
sfr16 TMR4     = 0xcc;                 // Timer4

sfr16 PCA0CP5  = 0xe1;                 // PCA0 Module 5 capture
sfr16 PCA0CP2  = 0xe9;                 // PCA0 Module 2 capture
sfr16 PCA0CP3  = 0xeb;                 // PCA0 Module 3 capture
sfr16 PCA0CP4  = 0xed;                 // PCA0 Module 4 capture
sfr16 PCA0     = 0xf9;                 // PCA0 counter
sfr16 PCA0CP0  = 0xfb;                 // PCA0 Module 0 capture
sfr16 PCA0CP1  = 0xfd;                 // PCA0 Module 1 capture

sfr16 ADC0     = 0xBE;                 // ADC0 Data
sfr16 ADC1     = 0xBE;                 // ADC1 Data

sfr16 DMA0DS   = 0xDB;                 // DMA0 XRAM Address Pointer
sfr16 DMA0CT   = 0xF9;                 // DMA0 Repeat Counter Limit
sfr16 DMA0DA   = 0xD9;                 // DMA0 Address Beginning
sfr16 DMA0CS   = 0xFB;                 // DMA0 Repeat Counter


void config (void);


#endif