dlmalloc.c

来自「minimal python variant for small footpri」· C语言 代码 · 共 1,900 行 · 第 1/5 页

/*
  INTERNAL_SIZE_T is the word-size used for internal bookkeeping
  of chunk sizes.

  The default version is the same as size_t.

  While not strictly necessary, it is best to define this as an
  unsigned type, even if size_t is a signed type. This may avoid some
  artificial size limitations on some systems.

  On a 64-bit machine, you may be able to reduce malloc overhead by
  defining INTERNAL_SIZE_T to be a 32 bit `unsigned int' at the
  expense of not being able to handle more than 2^32 of malloced
  space. If this limitation is acceptable, you are encouraged to set
  this unless you are on a platform requiring 16byte alignments. In
  this case the alignment requirements turn out to negate any
  potential advantages of decreasing size_t word size.

  Implementors: Beware of the possible combinations of:
     - INTERNAL_SIZE_T might be signed or unsigned, might be 32 or 64 bits,
       and might be the same width as int or as long
     - size_t might have different width and signedness as INTERNAL_SIZE_T
     - int and long might be 32 or 64 bits, and might be the same width
  To deal with this, most comparisons and difference computations
  among INTERNAL_SIZE_Ts should cast them to unsigned long, being
  aware of the fact that casting an unsigned int to a wider long does
  not sign-extend. (This also makes checking for negative numbers
  awkward.) Some of these casts result in harmless compiler warnings
  on some systems.
*/

#ifndef INTERNAL_SIZE_T
#define INTERNAL_SIZE_T size_t
#endif

/* The corresponding word size */
#define SIZE_SZ                (sizeof(INTERNAL_SIZE_T))


/*
  MALLOC_ALIGNMENT is the minimum alignment for malloc'ed chunks.
  It must be a power of two at least 2 * SIZE_SZ, even on machines
  for which smaller alignments would suffice. It may be defined as
  larger than this though. Note however that code and data structures
  are optimized for the case of 8-byte alignment.
*/


#ifndef MALLOC_ALIGNMENT
#define MALLOC_ALIGNMENT       (2 * SIZE_SZ)
#endif

/* The corresponding bit mask value */
#define MALLOC_ALIGN_MASK      (MALLOC_ALIGNMENT - 1)



/*
  REALLOC_ZERO_BYTES_FREES should be set if a call to
  realloc with zero bytes should be the same as a call to free.
  Some people think it should. Otherwise, since this malloc
  returns a unique pointer for malloc(0), so does realloc(p, 0).
*/

/*   #define REALLOC_ZERO_BYTES_FREES */

/*
  TRIM_FASTBINS controls whether free() of a very small chunk can
  immediately lead to trimming. Setting to true (1) can reduce memory
  footprint, but will almost always slow down programs that use a lot
  of small chunks.

  Define this only if you are willing to give up some speed to more
  aggressively reduce system-level memory footprint when releasing
  memory in programs that use many small chunks.  You can get
  essentially the same effect by setting MXFAST to 0, but this can
  lead to even greater slowdowns in programs using many small chunks.
  TRIM_FASTBINS is an in-between compile-time option, that disables
  only those chunks bordering topmost memory from being placed in
  fastbins.
*/

#ifndef TRIM_FASTBINS
#define TRIM_FASTBINS  0
#endif


/*
  USE_DL_PREFIX will prefix all public routines with the string 'dl'.
  This is necessary when you only want to use this malloc in one part 
  of a program, using your regular system malloc elsewhere.
*/

/* #define USE_DL_PREFIX */


/*
  USE_MALLOC_LOCK causes wrapper functions to surround each
  callable routine with pthread mutex lock/unlock.

  USE_MALLOC_LOCK forces USE_PUBLIC_MALLOC_WRAPPERS to be defined
*/


/* #define USE_MALLOC_LOCK */


/*
  If USE_PUBLIC_MALLOC_WRAPPERS is defined, every public routine is
  actually a wrapper function that first calls MALLOC_PREACTION, then
  calls the internal routine, and follows it with
  MALLOC_POSTACTION. This is needed for locking, but you can also use
  this, without USE_MALLOC_LOCK, for purposes of interception,
  instrumentation, etc. It is a sad fact that using wrappers often
  noticeably degrades performance of malloc-intensive programs.
*/

#ifdef USE_MALLOC_LOCK
#define USE_PUBLIC_MALLOC_WRAPPERS
#else
/* #define USE_PUBLIC_MALLOC_WRAPPERS */
#endif


/* 
   Two-phase name translation.
   All of the actual routines are given mangled names.
   When wrappers are used, they become the public callable versions.
   When DL_PREFIX is used, the callable names are prefixed.
*/

#ifndef USE_PUBLIC_MALLOC_WRAPPERS
#define cALLOc      public_cALLOc
#define fREe        public_fREe
#define cFREe       public_cFREe
#define mALLOc      public_mALLOc
#define mEMALIGn    public_mEMALIGn
#define rEALLOc     public_rEALLOc
#define vALLOc      public_vALLOc
#define pVALLOc     public_pVALLOc
#define mALLINFo    public_mALLINFo
#define mALLOPt     public_mALLOPt
#define mTRIm       public_mTRIm
#define mSTATs      public_mSTATs
#define mUSABLe     public_mUSABLe
#define iCALLOc     public_iCALLOc
#define iCOMALLOc   public_iCOMALLOc
#endif

#ifdef USE_DL_PREFIX
#define public_cALLOc    dlcalloc
#define public_fREe      dlfree
#define public_cFREe     dlcfree
#define public_mALLOc    dlmalloc
#define public_mEMALIGn  dlmemalign
#define public_rEALLOc   dlrealloc
#define public_vALLOc    dlvalloc
#define public_pVALLOc   dlpvalloc
#define public_mALLINFo  dlmallinfo
#define public_mALLOPt   dlmallopt
#define public_mTRIm     dlmalloc_trim
#define public_mSTATs    dlmalloc_stats
#define public_mUSABLe   dlmalloc_usable_size
#define public_iCALLOc   dlindependent_calloc
#define public_iCOMALLOc dlindependent_comalloc
#else /* USE_DL_PREFIX */
#define public_cALLOc    calloc
#define public_fREe      free
#define public_cFREe     cfree
#define public_mALLOc    malloc
#define public_mEMALIGn  memalign
#define public_rEALLOc   realloc
#define public_vALLOc    valloc
#define public_pVALLOc   pvalloc
#define public_mALLINFo  mallinfo
#define public_mALLOPt   mallopt
#define public_mTRIm     malloc_trim
#define public_mSTATs    malloc_stats
#define public_mUSABLe   malloc_usable_size
#define public_iCALLOc   independent_calloc
#define public_iCOMALLOc independent_comalloc
#endif /* USE_DL_PREFIX */


/*
  HAVE_MEMCPY should be defined if you are not otherwise using
  ANSI STD C, but still have memcpy and memset in your C library
  and want to use them in calloc and realloc. Otherwise simple
  macro versions are defined below.

  USE_MEMCPY should be defined as 1 if you actually want to
  have memset and memcpy called. People report that the macro
  versions are faster than libc versions on some systems.
  
  Even if USE_MEMCPY is set to 1, loops to copy/clear small chunks
  (of <= 36 bytes) are manually unrolled in realloc and calloc.
*/

#define HAVE_MEMCPY

#ifndef USE_MEMCPY
#ifdef HAVE_MEMCPY
#define USE_MEMCPY 1
#else
#define USE_MEMCPY 0
#endif
#endif


#if (__STD_C || defined(HAVE_MEMCPY))

#ifdef WIN32
/* On Win32 memset and memcpy are already declared in windows.h */
#else
#if __STD_C
/* void* memset(void*, int, size_t); */
/* void* memcpy(void*, const void*, size_t); */
#else
Void_t* memset();
Void_t* memcpy();
#endif
#endif
#endif

/*
  MALLOC_FAILURE_ACTION is the action to take before "return 0" when
  malloc fails to be able to return memory, either because memory is
  exhausted or because of illegal arguments.
  
  By default, sets errno if running on STD_C platform, else does nothing.  
*/

#ifndef MALLOC_FAILURE_ACTION
#if __STD_C
#define MALLOC_FAILURE_ACTION errno = ENOMEM;

#else
#define MALLOC_FAILURE_ACTION
#endif
#endif

/*
  MORECORE-related declarations. By default, rely on sbrk
*/


#ifdef LACKS_UNISTD_H
#if !defined(__FreeBSD__) && !defined(__OpenBSD__) && !defined(__NetBSD__)
#if __STD_C
extern Void_t*     sbrk(ptrdiff_t);
#else
extern Void_t*     sbrk();
#endif
#endif
#endif

/*
  MORECORE is the name of the routine to call to obtain more memory
  from the system.  See below for general guidance on writing
  alternative MORECORE functions, as well as a version for WIN32 and a
  sample version for pre-OSX macos.
*/

#ifndef MORECORE
#define MORECORE sbrk
#endif

/*
  MORECORE_FAILURE is the value returned upon failure of MORECORE
  as well as mmap. Since it cannot be an otherwise valid memory address,
  and must reflect values of standard sys calls, you probably ought not
  try to redefine it.
*/

#ifndef MORECORE_FAILURE
#define MORECORE_FAILURE (-1)
#endif

/*
  If MORECORE_CONTIGUOUS is true, take advantage of fact that
  consecutive calls to MORECORE with positive arguments always return
  contiguous increasing addresses.  This is true of unix sbrk.  Even
  if not defined, when regions happen to be contiguous, malloc will
  permit allocations spanning regions obtained from different
  calls. But defining this when applicable enables some stronger
  consistency checks and space efficiencies.
*/

#ifndef MORECORE_CONTIGUOUS
#define MORECORE_CONTIGUOUS 1
#endif

/*
  Define MORECORE_CANNOT_TRIM if your version of MORECORE
  cannot release space back to the system when given negative
  arguments. This is generally necessary only if you are using
  a hand-crafted MORECORE function that cannot handle negative arguments.
*/

/* #define MORECORE_CANNOT_TRIM */


/*
  Define HAVE_MMAP as true to optionally make malloc() use mmap() to
  allocate very large blocks.  These will be returned to the
  operating system immediately after a free(). Also, if mmap
  is available, it is used as a backup strategy in cases where
  MORECORE fails to provide space from system.

  This malloc is best tuned to work with mmap for large requests.
  If you do not have mmap, operations involving very large chunks (1MB
  or so) may be slower than you'd like.
*/

#ifndef HAVE_MMAP
#define HAVE_MMAP 1

/* 
   Standard unix mmap using /dev/zero clears memory so calloc doesn't
   need to.
*/

#ifndef MMAP_CLEARS
#define MMAP_CLEARS 1
#endif

#else /* no mmap */
#ifndef MMAP_CLEARS
#define MMAP_CLEARS 0
#endif
#endif


/* 
   MMAP_AS_MORECORE_SIZE is the minimum mmap size argument to use if
   sbrk fails, and mmap is used as a backup (which is done only if
   HAVE_MMAP).  The value must be a multiple of page size.  This
   backup strategy generally applies only when systems have "holes" in
   address space, so sbrk cannot perform contiguous expansion, but
   there is still space available on system.  On systems for which
   this is known to be useful (i.e. most linux kernels), this occurs
   only when programs allocate huge amounts of memory.  Between this,
   and the fact that mmap regions tend to be limited, the size should
   be large, to avoid too many mmap calls and thus avoid running out
   of kernel resources.
*/

#ifndef MMAP_AS_MORECORE_SIZE
#define MMAP_AS_MORECORE_SIZE (1024 * 1024)
#endif

/*
  Define HAVE_MREMAP to make realloc() use mremap() to re-allocate
  large blocks.  This is currently only possible on Linux with
  kernel versions newer than 1.3.77.
*/

#ifndef HAVE_MREMAP
#ifdef linux
#define HAVE_MREMAP 1
#else
#define HAVE_MREMAP 0
#endif

#endif /* HAVE_MMAP */


/*
  The system page size. To the extent possible, this malloc manages
  memory from the system in page-size units.  Note that this value is
  cached during initialization into a field of malloc_state. So even
  if malloc_getpagesize is a function, it is only called once.

  The following mechanics for getpagesize were adapted from bsd/gnu
  getpagesize.h. If none of the system-probes here apply, a value of
  4096 is used, which should be OK: If they don't apply, then using
  the actual value probably doesn't impact performance.
*/