test.fit.qmsg

altera公司的FPGA的一些开发用的VHDL的源代码用于学习

{ "Info" "IFSAC_FSAC_REGISTER_PACKING_BEGIN_FAST_REGISTER_INFO" "" "Info: Started Fast Input/Output/OE register processing" {  } {  } 0 0 "Started Fast Input/Output/OE register processing" 0 0}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_FAST_REGISTER_INFO" "" "Info: Finished Fast Input/Output/OE register processing" {  } {  } 0 0 "Finished Fast Input/Output/OE register processing" 0 0}
{ "Info" "IFYGR_FYGR_INFO_AUTO_MODE_REGISTER_PACKING" "Auto Normal " "Info: Fitter is using Normal packing mode for logic elements with Auto setting for Auto Packed Registers logic option" {  } {  } 0 0 "Fitter is using %2!s! packing mode for logic elements with %1!s! setting for Auto Packed Registers logic option" 0 0}
{ "Info" "IFSAC_FSAC_START_LUT_IO_RAM_PACKING" "" "Info: Moving registers into I/O cells, LUTs, and RAM blocks to improve timing and density" {  } {  } 0 0 "Moving registers into I/O cells, LUTs, and RAM blocks to improve timing and density" 0 0}
{ "Info" "IFSAC_FSAC_FINISH_LUT_IO_RAM_PACKING" "" "Info: Finished moving registers into I/O cells, LUTs, and RAM blocks" {  } {  } 0 0 "Finished moving registers into I/O cells, LUTs, and RAM blocks" 0 0}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "" "Info: Finished register packing" {  } {  } 0 0 "Finished register packing" 0 0}
{ "Warning" "WCUT_CUT_YGR_PLL_BAD_FANOUT_CLK3" "clk0 pllll:inst3\|altpll:altpll_component\|pll " "Warning: Output port clk0 of PLL \"pllll:inst3\|altpll:altpll_component\|pll\" feeds an output pin via global clocks -- jitter performance depends on switching rate of other design elements. Use PLL dedicated clock outputs to ensure jitter performance" {  } { { "altpll.tdf" "" { Text "c:/altera/quartus51/libraries/megafunctions/altpll.tdf" 763 3 0 } } { "pllll.vhd" "" { Text "C:/pci/reg_wr/pllll.vhd" 93 -1 0 } } { "test.bdf" "" { Schematic "C:/pci/reg_wr/test.bdf" { { 368 128 400 528 "inst3" "" } } } }  } 0 0 "Output port %1!s! of PLL \"%2!s!\" feeds an output pin via global clocks -- jitter performance depends on switching rate of other design elements. Use PLL dedicated clock outputs to ensure jitter performance" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Info: Fitter placement preparation operations beginning" {  } {  } 0 0 "Fitter placement preparation operations beginning" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Info: Fitter placement preparation operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0}