📄 test.pin
字号:
-- Copyright (C) 1991-2005 Altera Corporation
-- Your use of Altera Corporation's design tools, logic functions
-- and other software and tools, and its AMPP partner logic
-- functions, and any output files any of the foregoing
-- (including device programming or simulation files), and any
-- associated documentation or information are expressly subject
-- to the terms and conditions of the Altera Program License
-- Subscription Agreement, Altera MegaCore Function License
-- Agreement, or other applicable license agreement, including,
-- without limitation, that your use is for the sole purpose of
-- programming logic devices manufactured by Altera and sold by
-- Altera or its authorized distributors. Please refer to the
-- applicable agreement for further details.
--
-- This is a Quartus II output file. It is for reporting purposes only, and is
-- not intended for use as a Quartus II input file. This file cannot be used
-- to make Quartus II pin assignments - for instructions on how to make pin
-- assignments, please see Quartus II help.
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
-- NC : No Connect. This pin has no internal connection to the device.
-- VCCINT : Dedicated power pin, which MUST be connected to VCC (1.5V).
-- VCCIO : Dedicated power pin, which MUST be connected to VCC
-- of its bank.
-- Bank 1: 3.3V
-- Bank 2: 3.3V
-- Bank 3: 3.3V
-- Bank 4: 3.3V
-- GND : Dedicated ground pin. Dedicated GND pins MUST be connected to GND.
-- It can also be used to report unused dedicated pins. The connection
-- on the board for unused dedicated pins depends on whether this will
-- be used in a future design. One example is device migration. When
-- using device migration, refer to the device pin-tables. If it is a
-- GND pin in the pin table or if it will not be used in a future design
-- for another purpose the it MUST be connected to GND. If it is an unused
-- dedicated pin, then it can be connected to a valid signal on the board
-- (low, high, or toggling) if that signal is required for a different
-- revision of the design.
-- GND+ : Unused input pin. It can also be used to report unused dual-purpose pins.
-- This pin should be connected to GND. It may also be connected to a
-- valid signal on the board (low, high, or toggling) if that signal
-- is required for a different revision of the design.
-- GND* : Unused I/O pin. This pin can either be left unconnected or
-- connected to GND. Connecting this pin to GND will improve the
-- device's immunity to noise.
-- RESERVED : Unused I/O pin, which MUST be left unconnected.
-- RESERVED_INPUT : Pin is tri-stated and should be connected to the board.
-- RESERVED_INPUT_WITH_WEAK_PULLUP : Pin is tri-stated with internal weak pull-up resistor.
---------------------------------------------------------------------------------
Quartus II Version 5.1 Build 176 10/26/2005 SJ Full Version
CHIP "test" ASSIGNED TO AN: EP1C6Q240C8
Pin Name/Usage : Location : Dir. : I/O Standard : Voltage : I/O Bank : User Assignment
-------------------------------------------------------------------------------------------------------------
LA[2] : 1 : bidir : LVTTL : : 1 : Y
LA[3] : 2 : bidir : LVTTL : : 1 : Y
LA[4] : 3 : bidir : LVTTL : : 1 : Y
LA[5] : 4 : bidir : LVTTL : : 1 : Y
LA[6] : 5 : bidir : LVTTL : : 1 : Y
LA[7] : 6 : bidir : LVTTL : : 1 : Y
LA[8] : 7 : bidir : LVTTL : : 1 : Y
LA[9] : 8 : bidir : LVTTL : : 1 : Y
VCCIO1 : 9 : power : : 3.3V : 1 :
GND : 10 : gnd : : : :
LA[10] : 11 : bidir : LVTTL : : 1 : Y
LA[11] : 12 : bidir : LVTTL : : 1 : Y
LA[12] : 13 : bidir : LVTTL : : 1 : Y
LA[13] : 14 : bidir : LVTTL : : 1 : Y
LA[14] : 15 : bidir : LVTTL : : 1 : Y
LA[15] : 16 : bidir : LVTTL : : 1 : Y
LA[16] : 17 : bidir : LVTTL : : 1 : Y
LA[17] : 18 : bidir : LVTTL : : 1 : Y
LA[18] : 19 : bidir : LVTTL : : 1 : Y
LA[19] : 20 : bidir : LVTTL : : 1 : Y
LA[20] : 21 : bidir : LVTTL : : 1 : Y
VCCIO1 : 22 : power : : 3.3V : 1 :
LA[21] : 23 : bidir : LVTTL : : 1 : Y
~nCSO~ / RESERVED_INPUT_WITH_WEAK_PULLUP : 24 : input : LVTTL : : 1 : N
DATA0 : 25 : input : : : 1 :
nCONFIG : 26 : : : : 1 :
VCCA_PLL1 : 27 : power : : 1.5V : :
GND+ : 28 : : : : 1 :
GND+ : 29 : : : : 1 :
GNDA_PLL1 : 30 : gnd : : : :
GNDG_PLL1 : 31 : gnd : : : :
nCEO : 32 : : : : 1 :
nCE : 33 : : : : 1 :
MSEL0 : 34 : : : : 1 :
MSEL1 : 35 : : : : 1 :
DCLK : 36 : bidir : : : 1 :
~ASDO~ / RESERVED_INPUT_WITH_WEAK_PULLUP : 37 : input : LVTTL : : 1 : N
LA[22] : 38 : bidir : LVTTL : : 1 : Y
LA[23] : 39 : bidir : LVTTL : : 1 : Y
GND : 40 : gnd : : : :
LA[24] : 41 : bidir : LVTTL : : 1 : Y
LA[25] : 42 : bidir : LVTTL : : 1 : Y
LA[26] : 43 : bidir : LVTTL : : 1 : Y
LA[27] : 44 : bidir : LVTTL : : 1 : Y
LA[28] : 45 : bidir : LVTTL : : 1 : Y
LA[29] : 46 : bidir : LVTTL : : 1 : Y
LA[30] : 47 : bidir : LVTTL : : 1 : Y
LA[31] : 48 : bidir : LVTTL : : 1 : Y
RESERVED_INPUT : 49 : : : : 1 :
RESERVED_INPUT : 50 : : : : 1 :
VCCIO1 : 51 : power : : 3.3V : 1 :
GND : 52 : gnd : : : :
RESERVED_INPUT : 53 : : : : 1 :
leed : 54 : output : LVTTL : : 1 : Y
RESERVED_INPUT : 55 : : : : 1 :
RESERVED_INPUT : 56 : : : : 1 :
RESERVED_INPUT : 57 : : : : 1 :
RESERVED_INPUT : 58 : : : : 1 :
RESERVED_INPUT : 59 : : : : 1 :
RESERVED_INPUT : 60 : : : : 1 :
RESERVED_INPUT : 61 : : : : 4 :
RESERVED_INPUT : 62 : : : : 4 :
RESERVED_INPUT : 63 : : : : 4 :
RESERVED_INPUT : 64 : : : : 4 :
RESERVED_INPUT : 65 : : : : 4 :
RESERVED_INPUT : 66 : : : : 4 :
RESERVED_INPUT : 67 : : : : 4 :
RESERVED_INPUT : 68 : : : : 4 :
GND : 69 : gnd : : : :
VCCIO4 : 70 : power : : 3.3V : 4 :
GND : 71 : gnd : : : :
VCCINT : 72 : power : : 1.5V : :
RESERVED_INPUT : 73 : : : : 4 :
RESERVED_INPUT : 74 : : : : 4 :
RESERVED_INPUT : 75 : : : : 4 :
RESERVED_INPUT : 76 : : : : 4 :
RESERVED_INPUT : 77 : : : : 4 :
RESERVED_INPUT : 78 : : : : 4 :
RESERVED_INPUT : 79 : : : : 4 :
RESERVED_INPUT : 80 : : : : 4 :
RESERVED_INPUT : 81 : : : : 4 :
RESERVED_INPUT : 82 : : : : 4 :
RESERVED_INPUT : 83 : : : : 4 :
RESERVED_INPUT : 84 : : : : 4 :
RESERVED_INPUT : 85 : : : : 4 :
RESERVED_INPUT : 86 : : : : 4 :
RESERVED_INPUT : 87 : : : : 4 :
RESERVED_INPUT : 88 : : : : 4 :
GND : 89 : gnd : : : :
VCCINT : 90 : power : : 1.5V : :
GND : 91 : gnd : : : :
VCCIO4 : 92 : power : : 3.3V : 4 :
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -