dds.fit.qmsg

dds实现波形的生成

{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "" "Info: Finished register packing" {  } {  } 0}
{ "Info" "IFSAC_FSAC_IO_BANK_PIN_GROUP_STATISTICS" "I/O pins that need to be placed that use the same VCCIO and VREF, before I/O pin placement " "Info: Statistics of I/O pins that need to be placed that use the same VCCIO and VREF, before I/O pin placement" { { "Info" "IFSAC_FSAC_SINGLE_IOC_GROUP_STATISTICS" "20 unused 3.30 10 10 0 " "Info: Number of I/O pins in group: 20 (unused VREF, 3.30 VCCIO, 10 input, 10 output, 0 bidirectional)" { { "Info" "IFSAC_FSAC_IO_STDS_IN_IOC_GROUP" "LVTTL. " "Info: I/O standards used: LVTTL." {  } {  } 0}  } {  } 0}  } {  } 0}
{ "Info" "IFSAC_FSAC_IO_STATS_BEFORE_AFTER_PLACEMENT" "before " "Info: I/O bank details before I/O pin placement" { { "Info" "IFSAC_FSAC_IO_BANK_PIN_GROUP_STATISTICS" "I/O banks " "Info: Statistics of I/O banks" { { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "1 does not use unused 0 98 " "Info: I/O bank number 1 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  98 pins available" {  } {  } 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "2 does not use unused 0 92 " "Info: I/O bank number 2 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  92 pins available" {  } {  } 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "3 does not use unused 0 76 " "Info: I/O bank number 3 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  76 pins available" {  } {  } 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "4 does not use unused 2 89 " "Info: I/O bank number 4 does not use VREF pins and has unused VCCIO pins. 2 total pin(s) used --  89 pins available" {  } {  } 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "5 does not use unused 0 0 " "Info: I/O bank number 5 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  0 pins available" {  } {  } 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "6 does not use unused 0 0 " "Info: I/O bank number 6 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  0 pins available" {  } {  } 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "7 does not use unused 0 91 " "Info: I/O bank number 7 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  91 pins available" {  } {  } 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "8 does not use unused 0 76 " "Info: I/O bank number 8 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  76 pins available" {  } {  } 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "9 does not use unused 0 6 " "Info: I/O bank number 9 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  6 pins available" {  } {  } 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "10 does not use unused 0 4 " "Info: I/O bank number 10 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  4 pins available" {  } {  } 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "11 does not use unused 0 6 " "Info: I/O bank number 11 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  6 pins available" {  } {  } 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "12 does not use unused 0 4 " "Info: I/O bank number 12 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  4 pins available" {  } {  } 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "13 does not use unused 0 0 " "Info: I/O bank number 13 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  0 pins available" {  } {  } 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "14 does not use unused 0 0 " "Info: I/O bank number 14 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  0 pins available" {  } {  } 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "15 does not use unused 0 0 " "Info: I/O bank number 15 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  0 pins available" {  } {  } 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "16 does not use unused 0 0 " "Info: I/O bank number 16 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  0 pins available" {  } {  } 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "17 does not use unused 0 0 " "Info: I/O bank number 17 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  0 pins available" {  } {  } 0}  } {  } 0}  } {  } 0}
{ "Info" "IFSAC_FSAC_RAM_METASTABILITY_INFO" "" "Info: Design uses memory blocks. Violating setup or hold times of memory block address registers could cause memory contents to be corrupted. Make sure that all memory block address registers meet the setup and hold time requirements" {  } {  } 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Info: Fitter placement preparation operations beginning" {  } {  } 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Info: Fitter placement preparation operations ending: elapsed time is 00:00:00" {  } {  } 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Info: Fitter placement operations beginning" {  } {  } 0}
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Info: Fitter placement was successful" {  } {  } 0}
{ "Info" "ITDB_FULL_ESTIMATED_DATA_PATH_RESULT" "2.875 ns memory memory " "Info: Estimated most critical path is memory to memory delay of 2.875 ns" { { "Info" "ITDB_NODE_DELAY" "IC(0.000 ns) + CELL(0.000 ns) 0.000 ns lpm_rom0:u6\|altsyncram:altsyncram_component\|altsyncram_obq:auto_generated\|ram_block1a0~porta_address_reg0 1 MEM M4K_X39_Y56 1 " "Info: 1: + IC(0.000 ns) + CELL(0.000 ns) = 0.000 ns; Loc. = M4K_X39_Y56; Fanout = 1; MEM Node = 'lpm_rom0:u6\|altsyncram:altsyncram_component\|altsyncram_obq:auto_generated\|ram_block1a0~porta_address_reg0'" {  } { { "D:/cwdds/db/DDS_cmp.qrpt" "" { Report "D:/cwdds/db/DDS_cmp.qrpt" Compiler "DDS" "UNKNOWN" "V1" "D:/cwdds/db/DDS.quartus_db" { Floorplan "D:/cwdds/" "" "" { lpm_rom0:u6|altsyncram:altsyncram_component|altsyncram_obq:auto_generated|ram_block1a0~porta_address_reg0 } "NODE_NAME" } "" } } { "db/altsyncram_obq.tdf" "" { Text "D:/cwdds/db/altsyncram_obq.tdf" 41 2 0 } }  } 0} { "Info" "ITDB_NODE_DELAY" "IC(0.000 ns) + CELL(2.875 ns) 2.875 ns lpm_rom0:u6\|altsyncram:altsyncram_component\|altsyncram_obq:auto_generated\|q_a\[0\] 2 MEM M4K_X39_Y56 1 " "Info: 2: + IC(0.000 ns) + CELL(2.875 ns) = 2.875 ns; Loc. = M4K_X39_Y56; Fanout = 1; MEM Node = 'lpm_rom0:u6\|altsyncram:altsyncram_component\|altsyncram_obq:auto_generated\|q_a\[0\]'" {  } { { "D:/cwdds/db/DDS_cmp.qrpt" "" { Report "D:/cwdds/db/DDS_cmp.qrpt" Compiler "DDS" "UNKNOWN" "V1" "D:/cwdds/db/DDS.quartus_db" { Floorplan "D:/cwdds/" "" "2.875 ns" { lpm_rom0:u6|altsyncram:altsyncram_component|altsyncram_obq:auto_generated|ram_block1a0~porta_address_reg0 lpm_rom0:u6|altsyncram:altsyncram_component|altsyncram_obq:auto_generated|q_a[0] } "NODE_NAME" } "" } } { "db/altsyncram_obq.tdf" "" { Text "D:/cwdds/db/altsyncram_obq.tdf" 38 2 0 } }  } 0} { "Info" "ITDB_TOTAL_CELL_DELAY" "2.875 ns 100.00 % " "Info: Total cell delay = 2.875 ns ( 100.00 % )" {  } {  } 0}  } { { "D:/cwdds/db/DDS_cmp.qrpt" "" { Report "D:/cwdds/db/DDS_cmp.qrpt" Compiler "DDS" "UNKNOWN" "V1" "D:/cwdds/db/DDS.quartus_db" { Floorplan "D:/cwdds/" "" "2.875 ns" { lpm_rom0:u6|altsyncram:altsyncram_component|altsyncram_obq:auto_generated|ram_block1a0~porta_address_reg0 lpm_rom0:u6|altsyncram:altsyncram_component|altsyncram_obq:auto_generated|q_a[0] } "NODE_NAME" } "" } }  } 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:02 " "Info: Fitter placement operations ending: elapsed time is 00:00:02" {  } {  } 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Info: Fitter routing operations beginning" {  } {  } 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Info: Fitter routing operations ending: elapsed time is 00:00:00" {  } {  } 0}
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "Info: Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." {  } {  } 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Fixed Delay Chain Operation " "Info: Completed Fixed Delay Chain Operation" {  } {  } 0}
{ "Info" "IDAT_DAT_STARTED" "" "Info: Started post-fitting delay annotation" {  } {  } 0}
{ "Info" "IDAT_DAT_COMPLETED" "" "Info: Delay annotation completed successfully" {  } {  } 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Auto Delay Chain Operation " "Info: Completed Auto Delay Chain Operation" {  } {  } 0}
{ "Info" "IFSAC_FSAC_RAM_METASTABILITY_INFO" "" "Info: Design uses memory blocks. Violating setup or hold times of memory block address registers could cause memory contents to be corrupted. Make sure that all memory block address registers meet the setup and hold time requirements" {  } {  } 0}
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 0 s Quartus II " "Info: Quartus II Fitter was successful. 0 errors, 0 warnings" { { "Info" "IQEXE_END_BANNER_TIME" "Wed Jul 26 13:34:25 2006 " "Info: Processing ended: Wed Jul 26 13:34:25 2006" {  } {  } 0} { "Info" "IQEXE_ELAPSED_TIME" "00:00:38 " "Info: Elapsed time: 00:00:38" {  } {  } 0}  } {  } 0}