configure

The example for Boor USING MPI2

.
pac_str=`$MAKE -f conftest1 2>&1`
/bin/rm -f conftest conftest1
if test "$pac_str" != "success" ; then
    pac_cv_prog_make_include="no"
else
    pac_cv_prog_make_include="yes"
fi

fi

echo "$ac_t""$pac_cv_prog_make_include" 1>&6
if test "$pac_cv_prog_make_include" = "no" ; then
    :
else
    :
fi


echo $ac_n "checking whether make allows comments in actions""... $ac_c" 1>&6
echo "configure:1774: checking whether make allows comments in actions" >&5
if eval "test \"`echo '$''{'pac_cv_prog_make_allows_comments'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  

/bin/rm -f conftest
cat > conftest <<.
SHELL=/bin/sh
ALL:
	@# This is a valid comment!
	@echo "success"
.
pac_str=`$MAKE -f conftest 2>&1`
/bin/rm -f conftest 
if test "$pac_str" != "success" ; then
    pac_cv_prog_make_allows_comments="no"
else
    pac_cv_prog_make_allows_comments="yes"
fi

fi

echo "$ac_t""$pac_cv_prog_make_allows_comments" 1>&6
if test "$pac_cv_prog_make_allows_comments" = "no" ; then
    echo "configure: warning: Your make does not allow comments in target code.
Using this make may cause problems when building programs.
You should consider using gnumake instead." 1>&2
    
fi



echo $ac_n "checking for virtual path format""... $ac_c" 1>&6
echo "configure:1808: checking for virtual path format" >&5
if eval "test \"`echo '$''{'pac_cv_prog_make_vpath'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  

rm -rf conftest*
mkdir conftestdir
cat >conftestdir/a.c <<EOF
A sample file
EOF
cat > conftest <<EOF
all: a.o
VPATH=.:conftestdir
.c.o:
	@echo \$<
EOF
ac_out=`$MAKE -f conftest 2>&1 | grep 'conftestdir/a.c'`
if test -n "$ac_out" ; then 
    pac_cv_prog_make_vpath="VPATH"
else
    rm -f conftest
    cat > conftest <<EOF
all: a.o
.PATH: . conftestdir
.c.o:
	@echo \$<
EOF
    ac_out=`$MAKE -f conftest 2>&1 | grep 'conftestdir/a.c'`
    if test -n "$ac_out" ; then 
        pac_cv_prog_make_vpath=".PATH"
    else
	pac_cv_prog_make_vpath="neither VPATH nor .PATH works"
    fi
fi
rm -rf conftest*

fi

echo "$ac_t""$pac_cv_prog_make_vpath" 1>&6
if test "$pac_cv_prog_make_vpath" = "VPATH" ; then
    VPATH='VPATH=.:${srcdir}'
elif test "$pac_cv_prog_make_vpath" = ".PATH" ; then
    VPATH='.PATH: . ${srcdir}'
fi



echo $ac_n "checking whether make sets CFLAGS""... $ac_c" 1>&6
echo "configure:1857: checking whether make sets CFLAGS" >&5
if eval "test \"`echo '$''{'pac_cv_prog_make_set_cflags'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  

/bin/rm -f conftest
cat > conftest <<EOF
SHELL=/bin/sh
ALL:
	@echo X\${CFLAGS}X
EOF
pac_str=`$MAKE -f conftest 2>&1`
/bin/rm -f conftest 
if test "$pac_str" = "XX" ; then
    pac_cv_prog_make_set_cflags="no"
else
    pac_cv_prog_make_set_cflags="yes"
fi

fi

echo "$ac_t""$pac_cv_prog_make_set_cflags" 1>&6
if test "$pac_cv_prog_make_set_cflags" = "no" ; then
    :
else
    SET_CFLAGS='CFLAGS='
fi

if test "$pac_cv_prog_make_echos_dir" = "no" ; then
    echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
echo "configure:1888: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftestmake <<\EOF
all:
	@echo 'ac_maketemp="${MAKE}"'
EOF
# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
if test -n "$ac_maketemp"; then
  eval ac_cv_prog_make_${ac_make}_set=yes
else
  eval ac_cv_prog_make_${ac_make}_set=no
fi
rm -f conftestmake
fi
if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  SET_MAKE=
else
  echo "$ac_t""no" 1>&6
  SET_MAKE="MAKE=${MAKE-make}"
fi

else
    SET_MAKE="MAKE=${MAKE-make}"
fi



echo $ac_n "checking for library containing fabs""... $ac_c" 1>&6
echo "configure:1921: checking for library containing fabs" >&5
if eval "test \"`echo '$''{'ac_cv_search_fabs'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_func_search_save_LIBS="$LIBS"
ac_cv_search_fabs="no"
cat > conftest.$ac_ext <<EOF
#line 1928 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char fabs();

int main() {
fabs()
; return 0; }
EOF
if { (eval echo configure:1939: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  ac_cv_search_fabs="none required"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*
test "$ac_cv_search_fabs" = "no" && for i in m; do
LIBS="-l$i  $ac_func_search_save_LIBS"
cat > conftest.$ac_ext <<EOF
#line 1950 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char fabs();

int main() {
fabs()
; return 0; }
EOF
if { (eval echo configure:1961: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  ac_cv_search_fabs="-l$i"
break
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*
done
LIBS="$ac_func_search_save_LIBS"
fi

echo "$ac_t""$ac_cv_search_fabs" 1>&6
if test "$ac_cv_search_fabs" != "no"; then
  test "$ac_cv_search_fabs" = "none required" || LIBS="$ac_cv_search_fabs $LIBS"
  
else :
  
fi

# Check for mpi.h
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
echo "configure:1984: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
  CPP=
fi
if test -z "$CPP"; then
if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
    # This must be in double quotes, not single quotes, because CPP may get
  # substituted into the Makefile and "${CC-cc}" will confuse make.
  CPP="${CC-cc} -E"
  # On the NeXT, cc -E runs the code through the compiler's parser,
  # not just through cpp.
  cat > conftest.$ac_ext <<EOF
#line 1999 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:2005: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  :
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  CPP="${CC-cc} -E -traditional-cpp"
  cat > conftest.$ac_ext <<EOF
#line 2016 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:2022: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  :
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  CPP="${CC-cc} -nologo -E"
  cat > conftest.$ac_ext <<EOF
#line 2033 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:2039: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  :
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  CPP=/lib/cpp
fi
rm -f conftest*
fi
rm -f conftest*
fi
rm -f conftest*
  ac_cv_prog_CPP="$CPP"
fi
  CPP="$ac_cv_prog_CPP"
else
  ac_cv_prog_CPP="$CPP"
fi
echo "$ac_t""$CPP" 1>&6

ac_safe=`echo "mpi.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for mpi.h""... $ac_c" 1>&6
echo "configure:2065: checking for mpi.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2070 "configure"
#include "confdefs.h"
#include <mpi.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:2075: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  :
else
  echo "$ac_t""no" 1>&6
{ echo "configure: error: mpi.h is required" 1>&2; exit 1; }

fi


trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs.  It is not useful on other systems.
# If it contains results you don't want to keep, you may remove or edit it.
#
# By default, configure uses ./config.cache as the cache file,
# creating it if it does not exist already.  You can give configure
# the --cache-file=FILE option to use a different cache file; that is
# what configure does when it calls configure scripts in
# subdirectories, so they share the cache.
# Giving --cache-file=/dev/null disables caching, for debugging configure.
# config.status only pays attention to the cache file if you give it the
# --recheck option to rerun configure.
#
EOF
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
  case `(ac_space=' '; set | grep ac_space) 2>&1` in
  *ac_space=\ *)
    # `set' does not quote correctly, so add quotes (double-quote substitution
    # turns \\\\ into \\, and sed turns \\ into \).
    sed -n \
      -e "s/'/'\\\\''/g" \
      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
    ;;
  *)
    # `set' quotes correctly as required by POSIX, so do not add quotes.
    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
    ;;
  esac >> confcache
if cmp -s $cache_file confcache; then
  :
else
  if test -w $cache_file; then
    echo "updating cache $cache_file"
    cat confcache > $cache_file
  else
    echo "not updating unwritable cache $cache_file"
  fi
fi
rm -f confcache

trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15

test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'

# Any assignment to VPATH causes Sun make to only execute
# the first set of double-colon rules, so remove it if not needed.
# If there is a colon in the path, we need to keep it.
if test "x$srcdir" = x.; then
  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
fi

trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15

# Transform confdefs.h into DEFS.
# Protect against shell expansion while executing Makefile rules.
# Protect against Makefile macro expansion.
cat > conftest.defs <<\EOF
s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
s%\[%\\&%g
s%\]%\\&%g
s%\$%$$%g
EOF
DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
rm -f conftest.defs


# Without the "./", some shells look in PATH for config.status.
: ${CONFIG_STATUS=./config.status}

echo creating $CONFIG_STATUS
rm -f $CONFIG_STATUS
cat > $CONFIG_STATUS <<EOF
#! /bin/sh
# Generated automatically by configure.
# Run this file to recreate the current configuration.
# This directory was configured as follows,
# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
#
# $0 $ac_configure_args
#
# Compiler output produced by configure, useful for debugging
# configure, is