tn44def.inc

AVR Assembler 2 compiler

;***** THIS IS A MACHINE GENERATED FILE - DO NOT EDIT ********************
;***** Created: 2007-12-13 07:27 ******* Source: ATtiny44.xml ************
;*************************************************************************
;* A P P L I C A T I O N   N O T E   F O R   T H E   A V R   F A M I L Y
;* 
;* Number            : AVR000
;* File Name         : "tn44def.inc"
;* Title             : Register/Bit Definitions for the ATtiny44
;* Date              : 2007-12-13
;* Version           : 2.24
;* Support E-mail    : [e-mail]
;* Target MCU        : ATtiny44
;* 
;* DESCRIPTION
;* When including this file in the assembly program file, all I/O register 
;* names and I/O register bit names appearing in the data book can be used.
;* In addition, the six registers forming the three data pointers X, Y and 
;* Z have been assigned names XL - ZH. Highest RAM address for Internal 
;* SRAM is also defined 
;* 
;* The Register names are represented by their hexadecimal address.
;* 
;* The Register Bit names are represented by their bit number (0-7).
;* 
;* Please observe the difference in using the bit names with instructions
;* such as "sbr"/"cbr" (set/clear bit in register) and "sbrs"/"sbrc"
;* (skip if bit in register set/cleared). The following example illustrates
;* this:
;* 
;* in    r16,PORTB             ;read PORTB latch
;* sbr   r16,(1<<PB6)+(1<<PB5) ;set PB6 and PB5 (use masks, not bit#)
;* out   PORTB,r16             ;output to PORTB
;* 
;* in    r16,TIFR              ;read the Timer Interrupt Flag Register
;* sbrc  r16,TOV0              ;test the overflow flag (use bit#)
;* rjmp  TOV0_is_set           ;jump if set
;* ...                         ;otherwise do something else
;*************************************************************************

#ifndef _TN44DEF_INC_
#define _TN44DEF_INC_


#pragma partinc 0

; ***** SPECIFY DEVICE ***************************************************
.device ATtiny44
#pragma AVRPART ADMIN PART_NAME ATtiny44
.equ	SIGNATURE_000	= 0x1e
.equ	SIGNATURE_001	= 0x92
.equ	SIGNATURE_002	= 0x07

#pragma AVRPART CORE CORE_VERSION V2
#pragma AVRPART CORE NEW_INSTRUCTIONS lpm rd,z+


; ***** I/O REGISTER DEFINITIONS *****************************************
; NOTE:
; Definitions marked "MEMORY MAPPED"are extended I/O ports
; and cannot be used with IN/OUT instructions
.equ	SREG	= 0x3f
.equ	SPL	= 0x3d
.equ	SPH	= 0x3e
.equ	OCR0B	= 0x3c
.equ	GIMSK	= 0x3b
.equ	GIFR	= 0x3a
.equ	TIMSK0	= 0x39
.equ	TIFR0	= 0x38
.equ	SPMCSR	= 0x37
.equ	OCR0A	= 0x36
.equ	MCUCR	= 0x35
.equ	MCUSR	= 0x34
.equ	TCCR0B	= 0x33
.equ	TCNT0	= 0x32
.equ	OSCCAL	= 0x31
.equ	TCCR0A	= 0x30
.equ	TCCR1A	= 0x2f
.equ	TCCR1B	= 0x2e
.equ	TCNT1L	= 0x2c
.equ	TCNT1H	= 0x2d
.equ	OCR1AL	= 0x2a
.equ	OCR1AH	= 0x2b
.equ	OCR1BL	= 0x28
.equ	OCR1BH	= 0x29
.equ	DWDR	= 0x27
.equ	CLKPR	= 0x26
.equ	ICR1L	= 0x24
.equ	ICR1H	= 0x25
.equ	GTCCR	= 0x23
.equ	TCCR1C	= 0x22
.equ	WDTCSR	= 0x21
.equ	PCMSK1	= 0x20
.equ	EEARH	= 0x1f
.equ	EEARL	= 0x1e
.equ	EEDR	= 0x1d
.equ	EECR	= 0x1c
.equ	PORTA	= 0x1b
.equ	DDRA	= 0x1a
.equ	PINA	= 0x19
.equ	PORTB	= 0x18
.equ	DDRB	= 0x17
.equ	PINB	= 0x16
.equ	GPIOR2	= 0x15
.equ	GPIOR1	= 0x14
.equ	GPIOR0	= 0x13
.equ	PCMSK0	= 0x12
.equ	USIBR	= 0x10
.equ	USIDR	= 0x0f
.equ	USISR	= 0x0e
.equ	USICR	= 0x0d
.equ	TIMSK1	= 0x0c
.equ	TIFR1	= 0x0b
.equ	ACSR	= 0x08
.equ	ADMUX	= 0x07
.equ	ADCSRA	= 0x06
.equ	ADCH	= 0x05
.equ	ADCL	= 0x04
.equ	ADCSRB	= 0x03
.equ	DIDR0	= 0x01
.equ	PRR	= 0x00


; ***** BIT DEFINITIONS **************************************************

; ***** PORTA ************************
; PORTA - Port A Data Register
.equ	PORTA0	= 0	; Port A Data Register bit 0
.equ	PA0	= 0	; For compatibility
.equ	PORTA1	= 1	; Port A Data Register bit 1
.equ	PA1	= 1	; For compatibility
.equ	PORTA2	= 2	; Port A Data Register bit 2
.equ	PA2	= 2	; For compatibility
.equ	PORTA3	= 3	; Port A Data Register bit 3
.equ	PA3	= 3	; For compatibility
.equ	PORTA4	= 4	; Port A Data Register bit 4
.equ	PA4	= 4	; For compatibility
.equ	PORTA5	= 5	; Port A Data Register bit 5
.equ	PA5	= 5	; For compatibility
.equ	PORTA6	= 6	; Port A Data Register bit 6
.equ	PA6	= 6	; For compatibility
.equ	PORTA7	= 7	; Port A Data Register bit 7
.equ	PA7	= 7	; For compatibility

; DDRA - Port A Data Direction Register
.equ	DDA0	= 0	; Data Direction Register, Port A, bit 0
.equ	DDA1	= 1	; Data Direction Register, Port A, bit 1
.equ	DDA2	= 2	; Data Direction Register, Port A, bit 2
.equ	DDA3	= 3	; Data Direction Register, Port A, bit 3
.equ	DDA4	= 4	; Data Direction Register, Port A, bit 4
.equ	DDA5	= 5	; Data Direction Register, Port A, bit 5
.equ	DDA6	= 6	; Data Direction Register, Port A, bit 6
.equ	DDA7	= 7	; Data Direction Register, Port A, bit 7

; PINA - Port A Input Pins
.equ	PINA0	= 0	; Input Pins, Port A bit 0
.equ	PINA1	= 1	; Input Pins, Port A bit 1
.equ	PINA2	= 2	; Input Pins, Port A bit 2
.equ	PINA3	= 3	; Input Pins, Port A bit 3
.equ	PINA4	= 4	; Input Pins, Port A bit 4
.equ	PINA5	= 5	; Input Pins, Port A bit 5
.equ	PINA6	= 6	; Input Pins, Port A bit 6
.equ	PINA7	= 7	; Input Pins, Port A bit 7


; ***** PORTB ************************
; PORTB - Data Register, Port B
.equ	PORTB0	= 0	; 
.equ	PB0	= 0	; For compatibility
.equ	PORTB1	= 1	; 
.equ	PB1	= 1	; For compatibility
.equ	PORTB2	= 2	; 
.equ	PB2	= 2	; For compatibility
.equ	PORTB3	= 3	; 
.equ	PB3	= 3	; For compatibility

; DDRB - Data Direction Register, Port B
.equ	DDB0	= 0	; 
.equ	DDB1	= 1	; 
.equ	DDB2	= 2	; 
.equ	DDB3	= 3	; 

; PINB - Input Pins, Port B
.equ	PINB0	= 0	; 
.equ	PINB1	= 1	; 
.equ	PINB2	= 2	; 
.equ	PINB3	= 3	; 


; ***** ANALOG_COMPARATOR ************
; ADCSRB - ADC Control and Status Register B
.equ	ACME	= 6	; Analog Comparator Multiplexer Enable

; ACSR - Analog Comparator Control And Status Register
.equ	ACIS0	= 0	; Analog Comparator Interrupt Mode Select bit 0
.equ	ACIS1	= 1	; Analog Comparator Interrupt Mode Select bit 1
.equ	ACIC	= 2	; Analog Comparator Input Capture Enable
.equ	ACIE	= 3	; Analog Comparator Interrupt Enable
.equ	ACI	= 4	; Analog Comparator Interrupt Flag
.equ	ACO	= 5	; Analog Compare Output
.equ	ACBG	= 6	; Analog Comparator Bandgap Select
.equ	AINBG	= ACBG	; For compatibility
.equ	ACD	= 7	; Analog Comparator Disable

; DIDR0 - 
.equ	ADC0D	= 0	; ADC 0 Digital input buffer disable
.equ	ADC1D	= 1	; ADC 1 Digital input buffer disable


; ***** AD_CONVERTER *****************
; ADMUX - ADC Multiplexer Selection Register
.equ	MUX0	= 0	; Analog Channel and Gain Selection Bit 0
.equ	MUX1	= 1	; Analog Channel and Gain Selection Bit 1
.equ	MUX2	= 2	; Analog Channel and Gain Selection Bit 2
.equ	MUX3	= 3	; Analog Channel and Gain Selection Bit 3
.equ	MUX4	= 4	; Analog Channel and Gain Selection Bit 4
.equ	MUX5	= 5	; Analog Channel and Gain Selection Bit 5
.equ	REFS0	= 6	; Reference Selection Bit 0
.equ	REFS1	= 7	; Reference Selection Bit 1

; ADCSRA - ADC Control and Status Register A
.equ	ADPS0	= 0	; ADC  Prescaler Select Bit 0
.equ	ADPS1	= 1	; ADC  Prescaler Select Bit 1
.equ	ADPS2	= 2	; ADC  Prescaler Select Bit 2
.equ	ADIE	= 3	; ADC Interrupt Enable
.equ	ADIF	= 4	; ADC Interrupt Flag
.equ	ADATE	= 5	; ADC Auto Trigger Enable
.equ	ADSC	= 6	; ADC Start Conversion
.equ	ADEN	= 7	; ADC Enable

; ADCH - ADC Data Register High Byte
.equ	ADCH0	= 0	; ADC Data Register High Byte Bit 0
.equ	ADCH1	= 1	; ADC Data Register High Byte Bit 1
.equ	ADCH2	= 2	; ADC Data Register High Byte Bit 2
.equ	ADCH3	= 3	; ADC Data Register High Byte Bit 3
.equ	ADCH4	= 4	; ADC Data Register High Byte Bit 4
.equ	ADCH5	= 5	; ADC Data Register High Byte Bit 5
.equ	ADCH6	= 6	; ADC Data Register High Byte Bit 6
.equ	ADCH7	= 7	; ADC Data Register High Byte Bit 7

; ADCL - ADC Data Register Low Byte
.equ	ADCL0	= 0	; ADC Data Register Low Byte Bit 0
.equ	ADCL1	= 1	; ADC Data Register Low Byte Bit 1
.equ	ADCL2	= 2	; ADC Data Register Low Byte Bit 2
.equ	ADCL3	= 3	; ADC Data Register Low Byte Bit 3
.equ	ADCL4	= 4	; ADC Data Register Low Byte Bit 4
.equ	ADCL5	= 5	; ADC Data Register Low Byte Bit 5
.equ	ADCL6	= 6	; ADC Data Register Low Byte Bit 6
.equ	ADCL7	= 7	; ADC Data Register Low Byte Bit 7

; ADCSRB - ADC Control and Status Register B
.equ	ADTS0	= 0	; ADC Auto Trigger Source bit 0
.equ	ADTS1	= 1	; ADC Auto Trigger Source bit 1
.equ	ADTS2	= 2	; ADC Auto Trigger Source bit 2
.equ	ADLAR	= 4	; ADC Left Adjust Result
.equ	BIN	= 7	; Bipolar Input Mode

; DIDR0 - Digital Input Disable Register 0
;.equ	ADC0D	= 0	; ADC0 Digital Input Disable
;.equ	ADC1D	= 1	; ADC1 Digital Input Disable
.equ	ADC2D	= 2	; ADC2 Digital Input Disable
.equ	ADC3D	= 3	; ADC3 Digital Input Disable
.equ	ADC4D	= 4	; ADC4 Digital Input Disable
.equ	ADC5D	= 5	; ADC5 Digital Input Disable
.equ	ADC6D	= 6	; ADC6 Digital Input Disable
.equ	ADC7D	= 7	; ADC7 Digital Input Disable


; ***** USI **************************
; USIBR - USI Buffer Register
.equ	USIBR0	= 0	; USI Buffer Register bit 0
.equ	USIBR1	= 1	; USI Buffer Register bit 1
.equ	USIBR2	= 2	; USI Buffer Register bit 2
.equ	USIBR3	= 3	; USI Buffer Register bit 3
.equ	USIBR4	= 4	; USI Buffer Register bit 4
.equ	USIBR5	= 5	; USI Buffer Register bit 5
.equ	USIBR6	= 6	; USI Buffer Register bit 6
.equ	USIBR7	= 7	; USI Buffer Register bit 7

; USIDR - USI Data Register
.equ	USIDR0	= 0	; USI Data Register bit 0
.equ	USIDR1	= 1	; USI Data Register bit 1
.equ	USIDR2	= 2	; USI Data Register bit 2
.equ	USIDR3	= 3	; USI Data Register bit 3
.equ	USIDR4	= 4	; USI Data Register bit 4
.equ	USIDR5	= 5	; USI Data Register bit 5
.equ	USIDR6	= 6	; USI Data Register bit 6
.equ	USIDR7	= 7	; USI Data Register bit 7

; USISR - USI Status Register
.equ	USICNT0	= 0	; USI Counter Value Bit 0
.equ	USICNT1	= 1	; USI Counter Value Bit 1
.equ	USICNT2	= 2	; USI Counter Value Bit 2
.equ	USICNT3	= 3	; USI Counter Value Bit 3
.equ	USIDC	= 4	; Data Output Collision
.equ	USIPF	= 5	; Stop Condition Flag
.equ	USIOIF	= 6	; Counter Overflow Interrupt Flag
.equ	USISIF	= 7	; Start Condition Interrupt Flag

; USICR - USI Control Register
.equ	USITC	= 0	; Toggle Clock Port Pin
.equ	USICLK	= 1	; Clock Strobe
.equ	USICS0	= 2	; USI Clock Source Select Bit 0
.equ	USICS1	= 3	; USI Clock Source Select Bit 1
.equ	USIWM0	= 4	; USI Wire Mode Bit 0
.equ	USIWM1	= 5	; USI Wire Mode Bit 1
.equ	USIOIE	= 6	; Counter Overflow Interrupt Enable
.equ	USISIE	= 7	; Start Condition Interrupt Enable


; ***** EXTERNAL_INTERRUPT ***********
; MCUCR - MCU Control Register
.equ	ISC00	= 0	; Interrupt Sense Control 0 Bit 0
.equ	ISC01	= 1	; Interrupt Sense Control 0 Bit 1

; GIMSK - General Interrupt Mask Register
.equ	GICR	= GIMSK	; For compatibility
.equ	PCIE0	= 4	; Pin Change Interrupt Enable 0
.equ	PCIE1	= 5	; Pin Change Interrupt Enable 1
.equ	INT0	= 6	; External Interrupt Request 0 Enable

; GIFR - General Interrupt Flag register
.equ	PCIF0	= 4	; Pin Change Interrupt Flag 0
.equ	PCIF1	= 5	; Pin Change Interrupt Flag 1
.equ	INTF0	= 6	; External Interrupt Flag 0

; PCMSK1 - Pin Change Enable Mask 1
.equ	PCINT8	= 0	; Pin Change Enable Mask Bit 8
.equ	PCINT9	= 1	; Pin Change Enable Mask Bit 9
.equ	PCINT10	= 2	; Pin Change Enable Mask Bit 10
.equ	PCINT11	= 3	; Pin Change Enable Mask Bit 11

; PCMSK0 - Pin Change Enable Mask 0
.equ	PCINT0	= 0	; Pin Change Enable Mask Bit 0
.equ	PCINT1	= 1	; Pin Change Enable Mask Bit 1
.equ	PCINT2	= 2	; Pin Change Enable Mask Bit 2
.equ	PCINT3	= 3	; Pin Change Enable Mask Bit 3
.equ	PCINT4	= 4	; Pin Change Enable Mask Bit 4
.equ	PCINT5	= 5	; Pin Change Enable Mask Bit 5
.equ	PCINT6	= 6	; Pin Change Enable Mask Bit 6
.equ	PCINT7	= 7	; Pin Change Enable Mask Bit 7


; ***** EEPROM ***********************