📄 m32def.inc
字号:
;***** THIS IS A MACHINE GENERATED FILE - DO NOT EDIT ********************
;***** Created: 2007-12-13 07:27 ******* Source: ATmega32.xml ************
;*************************************************************************
;* A P P L I C A T I O N N O T E F O R T H E A V R F A M I L Y
;*
;* Number : AVR000
;* File Name : "m32def.inc"
;* Title : Register/Bit Definitions for the ATmega32
;* Date : 2007-12-13
;* Version : 2.24
;* Support E-mail : avr@atmel.com
;* Target MCU : ATmega32
;*
;* DESCRIPTION
;* When including this file in the assembly program file, all I/O register
;* names and I/O register bit names appearing in the data book can be used.
;* In addition, the six registers forming the three data pointers X, Y and
;* Z have been assigned names XL - ZH. Highest RAM address for Internal
;* SRAM is also defined
;*
;* The Register names are represented by their hexadecimal address.
;*
;* The Register Bit names are represented by their bit number (0-7).
;*
;* Please observe the difference in using the bit names with instructions
;* such as "sbr"/"cbr" (set/clear bit in register) and "sbrs"/"sbrc"
;* (skip if bit in register set/cleared). The following example illustrates
;* this:
;*
;* in r16,PORTB ;read PORTB latch
;* sbr r16,(1<<PB6)+(1<<PB5) ;set PB6 and PB5 (use masks, not bit#)
;* out PORTB,r16 ;output to PORTB
;*
;* in r16,TIFR ;read the Timer Interrupt Flag Register
;* sbrc r16,TOV0 ;test the overflow flag (use bit#)
;* rjmp TOV0_is_set ;jump if set
;* ... ;otherwise do something else
;*************************************************************************
#ifndef _M32DEF_INC_
#define _M32DEF_INC_
#pragma partinc 0
; ***** SPECIFY DEVICE ***************************************************
.device ATmega32
#pragma AVRPART ADMIN PART_NAME ATmega32
.equ SIGNATURE_000 = 0x1e
.equ SIGNATURE_001 = 0x95
.equ SIGNATURE_002 = 0x02
#pragma AVRPART CORE CORE_VERSION V2E
; ***** I/O REGISTER DEFINITIONS *****************************************
; NOTE:
; Definitions marked "MEMORY MAPPED"are extended I/O ports
; and cannot be used with IN/OUT instructions
.equ SREG = 0x3f
.equ SPL = 0x3d
.equ SPH = 0x3e
.equ OCR0 = 0x3c
.equ GICR = 0x3b
.equ GIFR = 0x3a
.equ TIMSK = 0x39
.equ TIFR = 0x38
.equ SPMCR = 0x37
.equ TWCR = 0x36
.equ MCUCR = 0x35
.equ MCUCSR = 0x34
.equ TCCR0 = 0x33
.equ TCNT0 = 0x32
.equ OSCCAL = 0x31
.equ OCDR = 0x31
.equ SFIOR = 0x30
.equ TCCR1A = 0x2f
.equ TCCR1B = 0x2e
.equ TCNT1L = 0x2c
.equ TCNT1H = 0x2d
.equ OCR1AL = 0x2a
.equ OCR1AH = 0x2b
.equ OCR1BL = 0x28
.equ OCR1BH = 0x29
.equ ICR1L = 0x26
.equ ICR1H = 0x27
.equ TCCR2 = 0x25
.equ TCNT2 = 0x24
.equ OCR2 = 0x23
.equ ASSR = 0x22
.equ WDTCR = 0x21
.equ UBRRH = 0x20
.equ UCSRC = 0x20
.equ EEARL = 0x1e
.equ EEARH = 0x1f
.equ EEDR = 0x1d
.equ EECR = 0x1c
.equ PORTA = 0x1b
.equ DDRA = 0x1a
.equ PINA = 0x19
.equ PORTB = 0x18
.equ DDRB = 0x17
.equ PINB = 0x16
.equ PORTC = 0x15
.equ DDRC = 0x14
.equ PINC = 0x13
.equ PORTD = 0x12
.equ DDRD = 0x11
.equ PIND = 0x10
.equ SPDR = 0x0f
.equ SPSR = 0x0e
.equ SPCR = 0x0d
.equ UDR = 0x0c
.equ UCSRA = 0x0b
.equ UCSRB = 0x0a
.equ UBRRL = 0x09
.equ ACSR = 0x08
.equ ADMUX = 0x07
.equ ADCSRA = 0x06
.equ ADCH = 0x05
.equ ADCL = 0x04
.equ TWDR = 0x03
.equ TWAR = 0x02
.equ TWSR = 0x01
.equ TWBR = 0x00
; ***** BIT DEFINITIONS **************************************************
; ***** EEPROM ***********************
; EEDR - EEPROM Data Register
.equ EEDR0 = 0 ; EEPROM Data Register bit 0
.equ EEDR1 = 1 ; EEPROM Data Register bit 1
.equ EEDR2 = 2 ; EEPROM Data Register bit 2
.equ EEDR3 = 3 ; EEPROM Data Register bit 3
.equ EEDR4 = 4 ; EEPROM Data Register bit 4
.equ EEDR5 = 5 ; EEPROM Data Register bit 5
.equ EEDR6 = 6 ; EEPROM Data Register bit 6
.equ EEDR7 = 7 ; EEPROM Data Register bit 7
; EECR - EEPROM Control Register
.equ EERE = 0 ; EEPROM Read Enable
.equ EEWE = 1 ; EEPROM Write Enable
.equ EEMWE = 2 ; EEPROM Master Write Enable
.equ EERIE = 3 ; EEPROM Ready Interrupt Enable
; ***** WATCHDOG *********************
; WDTCR - Watchdog Timer Control Register
.equ WDP0 = 0 ; Watch Dog Timer Prescaler bit 0
.equ WDP1 = 1 ; Watch Dog Timer Prescaler bit 1
.equ WDP2 = 2 ; Watch Dog Timer Prescaler bit 2
.equ WDE = 3 ; Watch Dog Enable
.equ WDTOE = 4 ; RW
.equ WDDE = WDTOE ; For compatibility
; ***** EXTERNAL_INTERRUPT ***********
; GICR - General Interrupt Control Register
.equ GIMSK = GICR ; For compatibility
.equ IVCE = 0 ; Interrupt Vector Change Enable
.equ IVSEL = 1 ; Interrupt Vector Select
.equ INT2 = 5 ; External Interrupt Request 2 Enable
.equ INT0 = 6 ; External Interrupt Request 0 Enable
.equ INT1 = 7 ; External Interrupt Request 1 Enable
; GIFR - General Interrupt Flag Register
.equ INTF2 = 5 ; External Interrupt Flag 2
.equ INTF0 = 6 ; External Interrupt Flag 0
.equ INTF1 = 7 ; External Interrupt Flag 1
; MCUCR - General Interrupt Control Register
.equ ISC00 = 0 ; Interrupt Sense Control 0 Bit 0
.equ ISC01 = 1 ; Interrupt Sense Control 0 Bit 1
.equ ISC10 = 2 ; Interrupt Sense Control 1 Bit 0
.equ ISC11 = 3 ; Interrupt Sense Control 1 Bit 1
; MCUCSR - MCU Control And Status Register
.equ ISC2 = 6 ; Interrupt Sense Control 2
; ***** TIMER_COUNTER_0 **************
; TCCR0 - Timer/Counter Control Register
.equ CS00 = 0 ; Clock Select 1
.equ CS01 = 1 ; Clock Select 1
.equ CS02 = 2 ; Clock Select 2
.equ WGM01 = 3 ; Waveform Generation Mode 1
.equ CTC0 = WGM01 ; For compatibility
.equ COM00 = 4 ; Compare match Output Mode 0
.equ COM01 = 5 ; Compare Match Output Mode 1
.equ WGM00 = 6 ; Waveform Generation Mode
.equ PWM0 = WGM00 ; For compatibility
.equ FOC0 = 7 ; Force Output Compare
; TCNT0 - Timer/Counter Register
.equ TCNT0_0 = 0 ;
.equ TCNT0_1 = 1 ;
.equ TCNT0_2 = 2 ;
.equ TCNT0_3 = 3 ;
.equ TCNT0_4 = 4 ;
.equ TCNT0_5 = 5 ;
.equ TCNT0_6 = 6 ;
.equ TCNT0_7 = 7 ;
; OCR0 - Output Compare Register
.equ OCR0_0 = 0 ;
.equ OCR0_1 = 1 ;
.equ OCR0_2 = 2 ;
.equ OCR0_3 = 3 ;
.equ OCR0_4 = 4 ;
.equ OCR0_5 = 5 ;
.equ OCR0_6 = 6 ;
.equ OCR0_7 = 7 ;
; TIMSK - Timer/Counter Interrupt Mask Register
.equ TOIE0 = 0 ; Timer/Counter0 Overflow Interrupt Enable
.equ OCIE0 = 1 ; Timer/Counter0 Output Compare Match Interrupt register
; TIFR - Timer/Counter Interrupt Flag register
.equ TOV0 = 0 ; Timer/Counter0 Overflow Flag
.equ OCF0 = 1 ; Output Compare Flag 0
; ***** TIMER_COUNTER_2 **************
; TIMSK - Timer/Counter Interrupt Mask register
.equ TOIE2 = 6 ; Timer/Counter2 Overflow Interrupt Enable
.equ OCIE2 = 7 ; Timer/Counter2 Output Compare Match Interrupt Enable
; TIFR - Timer/Counter Interrupt Flag Register
.equ TOV2 = 6 ; Timer/Counter2 Overflow Flag
.equ OCF2 = 7 ; Output Compare Flag 2
; TCCR2 - Timer/Counter2 Control Register
.equ CS20 = 0 ; Clock Select bit 0
.equ CS21 = 1 ; Clock Select bit 1
.equ CS22 = 2 ; Clock Select bit 2
.equ WGM21 = 3 ; Clear Timer/Counter2 on Compare Match
.equ CTC2 = WGM21 ; For compatibility
.equ COM20 = 4 ; Compare Output Mode bit 0
.equ COM21 = 5 ; Compare Output Mode bit 1
.equ WGM20 = 6 ; Pulse Width Modulator Enable
.equ PWM2 = WGM20 ; For compatibility
.equ FOC2 = 7 ; Force Output Compare
; TCNT2 - Timer/Counter2
.equ TCNT2_0 = 0 ; Timer/Counter 2 bit 0
.equ TCNT2_1 = 1 ; Timer/Counter 2 bit 1
.equ TCNT2_2 = 2 ; Timer/Counter 2 bit 2
.equ TCNT2_3 = 3 ; Timer/Counter 2 bit 3
.equ TCNT2_4 = 4 ; Timer/Counter 2 bit 4
.equ TCNT2_5 = 5 ; Timer/Counter 2 bit 5
.equ TCNT2_6 = 6 ; Timer/Counter 2 bit 6
.equ TCNT2_7 = 7 ; Timer/Counter 2 bit 7
; OCR2 - Timer/Counter2 Output Compare Register
.equ OCR2_0 = 0 ; Timer/Counter2 Output Compare Register Bit 0
.equ OCR2_1 = 1 ; Timer/Counter2 Output Compare Register Bit 1
.equ OCR2_2 = 2 ; Timer/Counter2 Output Compare Register Bit 2
.equ OCR2_3 = 3 ; Timer/Counter2 Output Compare Register Bit 3
.equ OCR2_4 = 4 ; Timer/Counter2 Output Compare Register Bit 4
.equ OCR2_5 = 5 ; Timer/Counter2 Output Compare Register Bit 5
.equ OCR2_6 = 6 ; Timer/Counter2 Output Compare Register Bit 6
.equ OCR2_7 = 7 ; Timer/Counter2 Output Compare Register Bit 7
; ASSR - Asynchronous Status Register
.equ TCR2UB = 0 ; Timer/counter Control Register2 Update Busy
.equ OCR2UB = 1 ; Output Compare Register2 Update Busy
.equ TCN2UB = 2 ; Timer/Counter2 Update Busy
.equ AS2 = 3 ; Asynchronous Timer/counter2
; ***** TIMER_COUNTER_1 **************
; TIMSK - Timer/Counter Interrupt Mask Register
.equ TOIE1 = 2 ; Timer/Counter1 Overflow Interrupt Enable
.equ OCIE1B = 3 ; Timer/Counter1 Output CompareB Match Interrupt Enable
.equ OCIE1A = 4 ; Timer/Counter1 Output CompareA Match Interrupt Enable
.equ TICIE1 = 5 ; Timer/Counter1 Input Capture Interrupt Enable
; TIFR - Timer/Counter Interrupt Flag register
.equ TOV1 = 2 ; Timer/Counter1 Overflow Flag
.equ OCF1B = 3 ; Output Compare Flag 1B
.equ OCF1A = 4 ; Output Compare Flag 1A
.equ ICF1 = 5 ; Input Capture Flag 1
; TCCR1A - Timer/Counter1 Control Register A
.equ WGM10 = 0 ; Waveform Generation Mode
.equ PWM10 = WGM10 ; For compatibility
.equ WGM11 = 1 ; Waveform Generation Mode
.equ PWM11 = WGM11 ; For compatibility
.equ FOC1B = 2 ; Force Output Compare 1B
.equ FOC1A = 3 ; Force Output Compare 1A
.equ COM1B0 = 4 ; Compare Output Mode 1B, bit 0
.equ COM1B1 = 5 ; Compare Output Mode 1B, bit 1
.equ COM1A0 = 6 ; Compare Ouput Mode 1A, bit 0
.equ COM1A1 = 7 ; Compare Output Mode 1A, bit 1
; TCCR1B - Timer/Counter1 Control Register B
.equ CS10 = 0 ; Prescaler source of Timer/Counter 1
.equ CS11 = 1 ; Prescaler source of Timer/Counter 1
.equ CS12 = 2 ; Prescaler source of Timer/Counter 1
.equ WGM12 = 3 ; Waveform Generation Mode
.equ CTC10 = WGM12 ; For compatibility
.equ CTC1 = WGM12 ; For compatibility
.equ WGM13 = 4 ; Waveform Generation Mode
.equ CTC11 = WGM13 ; For compatibility
.equ ICES1 = 6 ; Input Capture 1 Edge Select
.equ ICNC1 = 7 ; Input Capture 1 Noise Canceler
; ***** SPI **************************
; SPDR - SPI Data Register
.equ SPDR0 = 0 ; SPI Data Register bit 0
.equ SPDR1 = 1 ; SPI Data Register bit 1
.equ SPDR2 = 2 ; SPI Data Register bit 2
.equ SPDR3 = 3 ; SPI Data Register bit 3
.equ SPDR4 = 4 ; SPI Data Register bit 4
.equ SPDR5 = 5 ; SPI Data Register bit 5
.equ SPDR6 = 6 ; SPI Data Register bit 6
.equ SPDR7 = 7 ; SPI Data Register bit 7
; SPSR - SPI Status Register
.equ SPI2X = 0 ; Double SPI Speed Bit
.equ WCOL = 6 ; Write Collision Flag
.equ SPIF = 7 ; SPI Interrupt Flag
; SPCR - SPI Control Register
.equ SPR0 = 0 ; SPI Clock Rate Select 0
.equ SPR1 = 1 ; SPI Clock Rate Select 1
.equ CPHA = 2 ; Clock Phase
.equ CPOL = 3 ; Clock polarity
.equ MSTR = 4 ; Master/Slave Select
.equ DORD = 5 ; Data Order
.equ SPE = 6 ; SPI Enable
.equ SPIE = 7 ; SPI Interrupt Enable
; ***** USART ************************
; UDR - USART I/O Data Register
.equ UDR0 = 0 ; USART I/O Data Register bit 0
.equ UDR1 = 1 ; USART I/O Data Register bit 1
.equ UDR2 = 2 ; USART I/O Data Register bit 2
.equ UDR3 = 3 ; USART I/O Data Register bit 3
.equ UDR4 = 4 ; USART I/O Data Register bit 4
.equ UDR5 = 5 ; USART I/O Data Register bit 5
.equ UDR6 = 6 ; USART I/O Data Register bit 6
.equ UDR7 = 7 ; USART I/O Data Register bit 7
; UCSRA - USART Control and Status Register A
.equ USR = UCSRA ; For compatibility
.equ MPCM = 0 ; Multi-processor Communication Mode
.equ U2X = 1 ; Double the USART transmission speed
.equ UPE = 2 ; Parity Error
.equ PE = UPE ; For compatibility
.equ DOR = 3 ; Data overRun
.equ FE = 4 ; Framing Error
.equ UDRE = 5 ; USART Data Register Empty
.equ TXC = 6 ; USART Transmitt Complete
.equ RXC = 7 ; USART Receive Complete
; UCSRB - USART Control and Status Register B
.equ UCR = UCSRB ; For compatibility
.equ TXB8 = 0 ; Transmit Data Bit 8
.equ RXB8 = 1 ; Receive Data Bit 8
.equ UCSZ2 = 2 ; Character Size
.equ CHR9 = UCSZ2 ; For compatibility
.equ TXEN = 3 ; Transmitter Enable
.equ RXEN = 4 ; Receiver Enable
.equ UDRIE = 5 ; USART Data register Empty Interrupt Enable
.equ TXCIE = 6 ; TX Complete Interrupt Enable
.equ RXCIE = 7 ; RX Complete Interrupt Enable
; UCSRC - USART Control and Status Register C
.equ UCPOL = 0 ; Clock Polarity
.equ UCSZ0 = 1 ; Character Size
.equ UCSZ1 = 2 ; Character Size
.equ USBS = 3 ; Stop Bit Select
.equ UPM0 = 4 ; Parity Mode Bit 0
.equ UPM1 = 5 ; Parity Mode Bit 1
.equ UMSEL = 6 ; USART Mode Select
.equ URSEL = 7 ; Register Select
.equ UBRRHI = UBRRH ; For compatibility
; ***** ANALOG_COMPARATOR ************
; SFIOR - Special Function IO Register
.equ ACME = 3 ; Analog Comparator Multiplexer Enable
; ACSR - Analog Comparator Control And Status Register
.equ ACIS0 = 0 ; Analog Comparator Interrupt Mode Select bit 0
.equ ACIS1 = 1 ; Analog Comparator Interrupt Mode Select bit 1
.equ ACIC = 2 ; Analog Comparator Input Capture Enable
.equ ACIE = 3 ; Analog Comparator Interrupt Enable
.equ ACI = 4 ; Analog Comparator Interrupt Flag
.equ ACO = 5 ; Analog Compare Output
.equ ACBG = 6 ; Analog Comparator Bandgap Select
.equ ACD = 7 ; Analog Comparator Disable
; ***** AD_CONVERTER *****************
; ADMUX - The ADC multiplexer Selection Register
.equ MUX0 = 0 ; Analog Channel and Gain Selection Bits
.equ MUX1 = 1 ; Analog Channel and Gain Selection Bits
.equ MUX2 = 2 ; Analog Channel and Gain Selection Bits
.equ MUX3 = 3 ; Analog Channel and Gain Selection Bits
.equ MUX4 = 4 ; Analog Channel and Gain Selection Bits
.equ ADLAR = 5 ; Left Adjust Result
.equ REFS0 = 6 ; Reference Selection Bit 0
.equ REFS1 = 7 ; Reference Selection Bit 1
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -