m644def.inc

AVR Assembler 2 compiler

;***** THIS IS A MACHINE GENERATED FILE - DO NOT EDIT ********************
;***** Created: 2007-12-13 07:27 ******* Source: ATmega644.xml ***********
;*************************************************************************
;* A P P L I C A T I O N   N O T E   F O R   T H E   A V R   F A M I L Y
;* 
;* Number            : AVR000
;* File Name         : "m644def.inc"
;* Title             : Register/Bit Definitions for the ATmega644
;* Date              : 2007-12-13
;* Version           : 2.24
;* Support E-mail    : [e-mail]
;* Target MCU        : ATmega644
;* 
;* DESCRIPTION
;* When including this file in the assembly program file, all I/O register 
;* names and I/O register bit names appearing in the data book can be used.
;* In addition, the six registers forming the three data pointers X, Y and 
;* Z have been assigned names XL - ZH. Highest RAM address for Internal 
;* SRAM is also defined 
;* 
;* The Register names are represented by their hexadecimal address.
;* 
;* The Register Bit names are represented by their bit number (0-7).
;* 
;* Please observe the difference in using the bit names with instructions
;* such as "sbr"/"cbr" (set/clear bit in register) and "sbrs"/"sbrc"
;* (skip if bit in register set/cleared). The following example illustrates
;* this:
;* 
;* in    r16,PORTB             ;read PORTB latch
;* sbr   r16,(1<<PB6)+(1<<PB5) ;set PB6 and PB5 (use masks, not bit#)
;* out   PORTB,r16             ;output to PORTB
;* 
;* in    r16,TIFR              ;read the Timer Interrupt Flag Register
;* sbrc  r16,TOV0              ;test the overflow flag (use bit#)
;* rjmp  TOV0_is_set           ;jump if set
;* ...                         ;otherwise do something else
;*************************************************************************

#ifndef _M644DEF_INC_
#define _M644DEF_INC_


#pragma partinc 0

; ***** SPECIFY DEVICE ***************************************************
.device ATmega644
#pragma AVRPART ADMIN PART_NAME ATmega644
.equ	SIGNATURE_000	= 0x1e
.equ	SIGNATURE_001	= 0x96
.equ	SIGNATURE_002	= 0x09

#pragma AVRPART CORE CORE_VERSION V2E


; ***** I/O REGISTER DEFINITIONS *****************************************
; NOTE:
; Definitions marked "MEMORY MAPPED"are extended I/O ports
; and cannot be used with IN/OUT instructions
.equ	UDR0	= 0xc6	; MEMORY MAPPED
.equ	UBRR0L	= 0xc4	; MEMORY MAPPED
.equ	UBRR0H	= 0xc5	; MEMORY MAPPED
.equ	UCSR0C	= 0xc2	; MEMORY MAPPED
.equ	UCSR0B	= 0xc1	; MEMORY MAPPED
.equ	UCSR0A	= 0xc0	; MEMORY MAPPED
.equ	TWAMR	= 0xbd	; MEMORY MAPPED
.equ	TWCR	= 0xbc	; MEMORY MAPPED
.equ	TWDR	= 0xbb	; MEMORY MAPPED
.equ	TWAR	= 0xba	; MEMORY MAPPED
.equ	TWSR	= 0xb9	; MEMORY MAPPED
.equ	TWBR	= 0xb8	; MEMORY MAPPED
.equ	ASSR	= 0xb6	; MEMORY MAPPED
.equ	OCR2B	= 0xb4	; MEMORY MAPPED
.equ	OCR2A	= 0xb3	; MEMORY MAPPED
.equ	TCNT2	= 0xb2	; MEMORY MAPPED
.equ	TCCR2B	= 0xb1	; MEMORY MAPPED
.equ	TCCR2A	= 0xb0	; MEMORY MAPPED
.equ	OCR1BL	= 0x8a	; MEMORY MAPPED
.equ	OCR1BH	= 0x8b	; MEMORY MAPPED
.equ	OCR1AL	= 0x88	; MEMORY MAPPED
.equ	OCR1AH	= 0x89	; MEMORY MAPPED
.equ	ICR1L	= 0x86	; MEMORY MAPPED
.equ	ICR1H	= 0x87	; MEMORY MAPPED
.equ	TCNT1L	= 0x84	; MEMORY MAPPED
.equ	TCNT1H	= 0x85	; MEMORY MAPPED
.equ	TCCR1C	= 0x82	; MEMORY MAPPED
.equ	TCCR1B	= 0x81	; MEMORY MAPPED
.equ	TCCR1A	= 0x80	; MEMORY MAPPED
.equ	DIDR1	= 0x7f	; MEMORY MAPPED
.equ	DIDR0	= 0x7e	; MEMORY MAPPED
.equ	ADMUX	= 0x7c	; MEMORY MAPPED
.equ	ADCSRB	= 0x7b	; MEMORY MAPPED
.equ	ADCSRA	= 0x7a	; MEMORY MAPPED
.equ	ADCH	= 0x79	; MEMORY MAPPED
.equ	ADCL	= 0x78	; MEMORY MAPPED
.equ	PCMSK3	= 0x73	; MEMORY MAPPED
.equ	TIMSK2	= 0x70	; MEMORY MAPPED
.equ	TIMSK1	= 0x6f	; MEMORY MAPPED
.equ	TIMSK0	= 0x6e	; MEMORY MAPPED
.equ	PCMSK2	= 0x6d	; MEMORY MAPPED
.equ	PCMSK1	= 0x6c	; MEMORY MAPPED
.equ	PCMSK0	= 0x6b	; MEMORY MAPPED
.equ	EICRA	= 0x69	; MEMORY MAPPED
.equ	PCICR	= 0x68	; MEMORY MAPPED
.equ	OSCCAL	= 0x66	; MEMORY MAPPED
.equ	PRR	= 0x64	; MEMORY MAPPED
.equ	CLKPR	= 0x61	; MEMORY MAPPED
.equ	WDTCSR	= 0x60	; MEMORY MAPPED
.equ	SREG	= 0x3f
.equ	SPL	= 0x3d
.equ	SPH	= 0x3e
.equ	RAMPZ	= 0x3b
.equ	SPMCSR	= 0x37
.equ	MCUCR	= 0x35
.equ	MCUSR	= 0x34
.equ	SMCR	= 0x33
.equ	OCDR	= 0x31
.equ	ACSR	= 0x30
.equ	SPDR	= 0x2e
.equ	SPSR	= 0x2d
.equ	SPCR	= 0x2c
.equ	GPIOR2	= 0x2b
.equ	GPIOR1	= 0x2a
.equ	OCR0B	= 0x28
.equ	OCR0A	= 0x27
.equ	TCNT0	= 0x26
.equ	TCCR0B	= 0x25
.equ	TCCR0A	= 0x24
.equ	GTCCR	= 0x23
.equ	EEARH	= 0x22
.equ	EEARL	= 0x21
.equ	EEDR	= 0x20
.equ	EECR	= 0x1f
.equ	GPIOR0	= 0x1e
.equ	EIMSK	= 0x1d
.equ	EIFR	= 0x1c
.equ	PCIFR	= 0x1b
.equ	TIFR2	= 0x17
.equ	TIFR1	= 0x16
.equ	TIFR0	= 0x15
.equ	PORTD	= 0x0b
.equ	DDRD	= 0x0a
.equ	PIND	= 0x09
.equ	PORTC	= 0x08
.equ	DDRC	= 0x07
.equ	PINC	= 0x06
.equ	PORTB	= 0x05
.equ	DDRB	= 0x04
.equ	PINB	= 0x03
.equ	PORTA	= 0x02
.equ	DDRA	= 0x01
.equ	PINA	= 0x00


; ***** BIT DEFINITIONS **************************************************

; ***** ANALOG_COMPARATOR ************
; ADCSRB - ADC Control and Status Register B
.equ	ACME	= 6	; Analog Comparator Multiplexer Enable

; ACSR - Analog Comparator Control And Status Register
.equ	ACIS0	= 0	; Analog Comparator Interrupt Mode Select bit 0
.equ	ACIS1	= 1	; Analog Comparator Interrupt Mode Select bit 1
.equ	ACIC	= 2	; Analog Comparator Input Capture Enable
.equ	ACIE	= 3	; Analog Comparator Interrupt Enable
.equ	ACI	= 4	; Analog Comparator Interrupt Flag
.equ	ACO	= 5	; Analog Compare Output
.equ	ACBG	= 6	; Analog Comparator Bandgap Select
.equ	ACD	= 7	; Analog Comparator Disable

; DIDR1 - Digital Input Disable Register 1
.equ	AIN0D	= 0	; AIN0 Digital Input Disable
.equ	AIN1D	= 1	; AIN1 Digital Input Disable


; ***** USART0 ***********************
; UDR0 - USART I/O Data Register
.equ	UDR0_0	= 0	; USART I/O Data Register bit 0
.equ	UDR0_1	= 1	; USART I/O Data Register bit 1
.equ	UDR0_2	= 2	; USART I/O Data Register bit 2
.equ	UDR0_3	= 3	; USART I/O Data Register bit 3
.equ	UDR0_4	= 4	; USART I/O Data Register bit 4
.equ	UDR0_5	= 5	; USART I/O Data Register bit 5
.equ	UDR0_6	= 6	; USART I/O Data Register bit 6
.equ	UDR0_7	= 7	; USART I/O Data Register bit 7

; UCSR0A - USART Control and Status Register A
.equ	MPCM0	= 0	; Multi-processor Communication Mode
.equ	U2X0	= 1	; Double the USART transmission speed
.equ	UPE0	= 2	; Parity Error
.equ	DOR0	= 3	; Data overRun
.equ	FE0	= 4	; Framing Error
.equ	UDRE0	= 5	; USART Data Register Empty
.equ	TXC0	= 6	; USART Transmitt Complete
.equ	RXC0	= 7	; USART Receive Complete

; UCSR0B - USART Control and Status Register B
.equ	TXB80	= 0	; Transmit Data Bit 8
.equ	RXB80	= 1	; Receive Data Bit 8
.equ	UCSZ02	= 2	; Character Size
.equ	TXEN0	= 3	; Transmitter Enable
.equ	RXEN0	= 4	; Receiver Enable
.equ	UDRIE0	= 5	; USART Data register Empty Interrupt Enable
.equ	TXCIE0	= 6	; TX Complete Interrupt Enable
.equ	RXCIE0	= 7	; RX Complete Interrupt Enable

; UCSR0C - USART Control and Status Register C
.equ	UCPOL0	= 0	; Clock Polarity
.equ	UCSZ00	= 1	; Character Size
.equ	UCPHA0	= UCSZ00	; For compatibility
.equ	UCSZ01	= 2	; Character Size
.equ	UDORD0	= UCSZ01	; For compatibility
.equ	USBS0	= 3	; Stop Bit Select
.equ	UPM00	= 4	; Parity Mode Bit 0
.equ	UPM01	= 5	; Parity Mode Bit 1
.equ	UMSEL00	= 6	; USART Mode Select
.equ	UMSEL0	= UMSEL00	; For compatibility
.equ	UMSEL01	= 7	; USART Mode Select
.equ	UMSEL1	= UMSEL01	; For compatibility

; UBRR0H - USART Baud Rate Register High Byte
.equ	UBRR8	= 0	; USART Baud Rate Register bit 8
.equ	UBRR9	= 1	; USART Baud Rate Register bit 9
.equ	UBRR10	= 2	; USART Baud Rate Register bit 10
.equ	UBRR11	= 3	; USART Baud Rate Register bit 11

; UBRR0L - USART Baud Rate Register Low Byte
.equ	UBRR0	= 0	; USART Baud Rate Register bit 0
.equ	UBRR1	= 1	; USART Baud Rate Register bit 1
.equ	UBRR2	= 2	; USART Baud Rate Register bit 2
.equ	UBRR3	= 3	; USART Baud Rate Register bit 3
.equ	UBRR4	= 4	; USART Baud Rate Register bit 4
.equ	UBRR5	= 5	; USART Baud Rate Register bit 5
.equ	UBRR6	= 6	; USART Baud Rate Register bit 6
.equ	UBRR7	= 7	; USART Baud Rate Register bit 7


; ***** PORTA ************************
; PORTA - Port A Data Register
.equ	PORTA0	= 0	; Port A Data Register bit 0
.equ	PA0	= 0	; For compatibility
.equ	PORTA1	= 1	; Port A Data Register bit 1
.equ	PA1	= 1	; For compatibility
.equ	PORTA2	= 2	; Port A Data Register bit 2
.equ	PA2	= 2	; For compatibility
.equ	PORTA3	= 3	; Port A Data Register bit 3
.equ	PA3	= 3	; For compatibility
.equ	PORTA4	= 4	; Port A Data Register bit 4
.equ	PA4	= 4	; For compatibility
.equ	PORTA5	= 5	; Port A Data Register bit 5
.equ	PA5	= 5	; For compatibility
.equ	PORTA6	= 6	; Port A Data Register bit 6
.equ	PA6	= 6	; For compatibility
.equ	PORTA7	= 7	; Port A Data Register bit 7
.equ	PA7	= 7	; For compatibility

; DDRA - Port A Data Direction Register
.equ	DDA0	= 0	; Data Direction Register, Port A, bit 0
.equ	DDA1	= 1	; Data Direction Register, Port A, bit 1
.equ	DDA2	= 2	; Data Direction Register, Port A, bit 2
.equ	DDA3	= 3	; Data Direction Register, Port A, bit 3
.equ	DDA4	= 4	; Data Direction Register, Port A, bit 4
.equ	DDA5	= 5	; Data Direction Register, Port A, bit 5
.equ	DDA6	= 6	; Data Direction Register, Port A, bit 6
.equ	DDA7	= 7	; Data Direction Register, Port A, bit 7

; PINA - Port A Input Pins
.equ	PINA0	= 0	; Input Pins, Port A bit 0
.equ	PINA1	= 1	; Input Pins, Port A bit 1
.equ	PINA2	= 2	; Input Pins, Port A bit 2
.equ	PINA3	= 3	; Input Pins, Port A bit 3
.equ	PINA4	= 4	; Input Pins, Port A bit 4
.equ	PINA5	= 5	; Input Pins, Port A bit 5
.equ	PINA6	= 6	; Input Pins, Port A bit 6
.equ	PINA7	= 7	; Input Pins, Port A bit 7


; ***** PORTB ************************
; PORTB - Port B Data Register
.equ	PORTB0	= 0	; Port B Data Register bit 0
.equ	PB0	= 0	; For compatibility
.equ	PORTB1	= 1	; Port B Data Register bit 1
.equ	PB1	= 1	; For compatibility
.equ	PORTB2	= 2	; Port B Data Register bit 2
.equ	PB2	= 2	; For compatibility
.equ	PORTB3	= 3	; Port B Data Register bit 3
.equ	PB3	= 3	; For compatibility
.equ	PORTB4	= 4	; Port B Data Register bit 4
.equ	PB4	= 4	; For compatibility
.equ	PORTB5	= 5	; Port B Data Register bit 5
.equ	PB5	= 5	; For compatibility
.equ	PORTB6	= 6	; Port B Data Register bit 6
.equ	PB6	= 6	; For compatibility
.equ	PORTB7	= 7	; Port B Data Register bit 7
.equ	PB7	= 7	; For compatibility

; DDRB - Port B Data Direction Register
.equ	DDB0	= 0	; Port B Data Direction Register bit 0
.equ	DDB1	= 1	; Port B Data Direction Register bit 1
.equ	DDB2	= 2	; Port B Data Direction Register bit 2
.equ	DDB3	= 3	; Port B Data Direction Register bit 3
.equ	DDB4	= 4	; Port B Data Direction Register bit 4
.equ	DDB5	= 5	; Port B Data Direction Register bit 5
.equ	DDB6	= 6	; Port B Data Direction Register bit 6
.equ	DDB7	= 7	; Port B Data Direction Register bit 7

; PINB - Port B Input Pins
.equ	PINB0	= 0	; Port B Input Pins bit 0
.equ	PINB1	= 1	; Port B Input Pins bit 1
.equ	PINB2	= 2	; Port B Input Pins bit 2
.equ	PINB3	= 3	; Port B Input Pins bit 3
.equ	PINB4	= 4	; Port B Input Pins bit 4
.equ	PINB5	= 5	; Port B Input Pins bit 5
.equ	PINB6	= 6	; Port B Input Pins bit 6
.equ	PINB7	= 7	; Port B Input Pins bit 7


; ***** PORTC ************************
; PORTC - Port C Data Register
.equ	PORTC0	= 0	; Port C Data Register bit 0
.equ	PC0	= 0	; For compatibility
.equ	PORTC1	= 1	; Port C Data Register bit 1
.equ	PC1	= 1	; For compatibility
.equ	PORTC2	= 2	; Port C Data Register bit 2
.equ	PC2	= 2	; For compatibility
.equ	PORTC3	= 3	; Port C Data Register bit 3
.equ	PC3	= 3	; For compatibility
.equ	PORTC4	= 4	; Port C Data Register bit 4
.equ	PC4	= 4	; For compatibility
.equ	PORTC5	= 5	; Port C Data Register bit 5
.equ	PC5	= 5	; For compatibility
.equ	PORTC6	= 6	; Port C Data Register bit 6
.equ	PC6	= 6	; For compatibility
.equ	PORTC7	= 7	; Port C Data Register bit 7
.equ	PC7	= 7	; For compatibility

; DDRC - Port C Data Direction Register
.equ	DDC0	= 0	; Port C Data Direction Register bit 0
.equ	DDC1	= 1	; Port C Data Direction Register bit 1
.equ	DDC2	= 2	; Port C Data Direction Register bit 2
.equ	DDC3	= 3	; Port C Data Direction Register bit 3
.equ	DDC4	= 4	; Port C Data Direction Register bit 4
.equ	DDC5	= 5	; Port C Data Direction Register bit 5
.equ	DDC6	= 6	; Port C Data Direction Register bit 6
.equ	DDC7	= 7	; Port C Data Direction Register bit 7

; PINC - Port C Input Pins
.equ	PINC0	= 0	; Port C Input Pins bit 0
.equ	PINC1	= 1	; Port C Input Pins bit 1
.equ	PINC2	= 2	; Port C Input Pins bit 2
.equ	PINC3	= 3	; Port C Input Pins bit 3
.equ	PINC4	= 4	; Port C Input Pins bit 4
.equ	PINC5	= 5	; Port C Input Pins bit 5
.equ	PINC6	= 6	; Port C Input Pins bit 6
.equ	PINC7	= 7	; Port C Input Pins bit 7


; ***** PORTD ************************
; PORTD - Port D Data Register
.equ	PORTD0	= 0	; Port D Data Register bit 0
.equ	PD0	= 0	; For compatibility
.equ	PORTD1	= 1	; Port D Data Register bit 1
.equ	PD1	= 1	; For compatibility
.equ	PORTD2	= 2	; Port D Data Register bit 2
.equ	PD2	= 2	; For compatibility
.equ	PORTD3	= 3	; Port D Data Register bit 3