📄 m48pdef.inc
字号:
;***** THIS IS A MACHINE GENERATED FILE - DO NOT EDIT ********************
;***** Created: 2007-12-13 07:27 ******* Source: ATmega48P.xml ***********
;*************************************************************************
;* A P P L I C A T I O N N O T E F O R T H E A V R F A M I L Y
;*
;* Number : AVR000
;* File Name : "m48Pdef.inc"
;* Title : Register/Bit Definitions for the ATmega48P
;* Date : 2007-12-13
;* Version : 2.24
;* Support E-mail : avr@atmel.com
;* Target MCU : ATmega48P
;*
;* DESCRIPTION
;* When including this file in the assembly program file, all I/O register
;* names and I/O register bit names appearing in the data book can be used.
;* In addition, the six registers forming the three data pointers X, Y and
;* Z have been assigned names XL - ZH. Highest RAM address for Internal
;* SRAM is also defined
;*
;* The Register names are represented by their hexadecimal address.
;*
;* The Register Bit names are represented by their bit number (0-7).
;*
;* Please observe the difference in using the bit names with instructions
;* such as "sbr"/"cbr" (set/clear bit in register) and "sbrs"/"sbrc"
;* (skip if bit in register set/cleared). The following example illustrates
;* this:
;*
;* in r16,PORTB ;read PORTB latch
;* sbr r16,(1<<PB6)+(1<<PB5) ;set PB6 and PB5 (use masks, not bit#)
;* out PORTB,r16 ;output to PORTB
;*
;* in r16,TIFR ;read the Timer Interrupt Flag Register
;* sbrc r16,TOV0 ;test the overflow flag (use bit#)
;* rjmp TOV0_is_set ;jump if set
;* ... ;otherwise do something else
;*************************************************************************
#ifndef _M48PDEF_INC_
#define _M48PDEF_INC_
#pragma partinc 0
; ***** SPECIFY DEVICE ***************************************************
.device ATmega48P
#pragma AVRPART ADMIN PART_NAME ATmega48P
.equ SIGNATURE_000 = 0x1e
.equ SIGNATURE_001 = 0x92
.equ SIGNATURE_002 = 0x0a
#pragma AVRPART CORE CORE_VERSION V2E
; ***** I/O REGISTER DEFINITIONS *****************************************
; NOTE:
; Definitions marked "MEMORY MAPPED"are extended I/O ports
; and cannot be used with IN/OUT instructions
.equ UDR0 = 0xc6 ; MEMORY MAPPED
.equ UBRR0L = 0xc4 ; MEMORY MAPPED
.equ UBRR0H = 0xc5 ; MEMORY MAPPED
.equ UCSR0C = 0xc2 ; MEMORY MAPPED
.equ UCSR0B = 0xc1 ; MEMORY MAPPED
.equ UCSR0A = 0xc0 ; MEMORY MAPPED
.equ TWAMR = 0xbd ; MEMORY MAPPED
.equ TWCR = 0xbc ; MEMORY MAPPED
.equ TWDR = 0xbb ; MEMORY MAPPED
.equ TWAR = 0xba ; MEMORY MAPPED
.equ TWSR = 0xb9 ; MEMORY MAPPED
.equ TWBR = 0xb8 ; MEMORY MAPPED
.equ ASSR = 0xb6 ; MEMORY MAPPED
.equ OCR2B = 0xb4 ; MEMORY MAPPED
.equ OCR2A = 0xb3 ; MEMORY MAPPED
.equ TCNT2 = 0xb2 ; MEMORY MAPPED
.equ TCCR2B = 0xb1 ; MEMORY MAPPED
.equ TCCR2A = 0xb0 ; MEMORY MAPPED
.equ OCR1BL = 0x8a ; MEMORY MAPPED
.equ OCR1BH = 0x8b ; MEMORY MAPPED
.equ OCR1AL = 0x88 ; MEMORY MAPPED
.equ OCR1AH = 0x89 ; MEMORY MAPPED
.equ ICR1L = 0x86 ; MEMORY MAPPED
.equ ICR1H = 0x87 ; MEMORY MAPPED
.equ TCNT1L = 0x84 ; MEMORY MAPPED
.equ TCNT1H = 0x85 ; MEMORY MAPPED
.equ TCCR1C = 0x82 ; MEMORY MAPPED
.equ TCCR1B = 0x81 ; MEMORY MAPPED
.equ TCCR1A = 0x80 ; MEMORY MAPPED
.equ DIDR1 = 0x7f ; MEMORY MAPPED
.equ DIDR0 = 0x7e ; MEMORY MAPPED
.equ ADMUX = 0x7c ; MEMORY MAPPED
.equ ADCSRB = 0x7b ; MEMORY MAPPED
.equ ADCSRA = 0x7a ; MEMORY MAPPED
.equ ADCH = 0x79 ; MEMORY MAPPED
.equ ADCL = 0x78 ; MEMORY MAPPED
.equ TIMSK2 = 0x70 ; MEMORY MAPPED
.equ TIMSK1 = 0x6f ; MEMORY MAPPED
.equ TIMSK0 = 0x6e ; MEMORY MAPPED
.equ PCMSK1 = 0x6c ; MEMORY MAPPED
.equ PCMSK2 = 0x6d ; MEMORY MAPPED
.equ PCMSK0 = 0x6b ; MEMORY MAPPED
.equ EICRA = 0x69 ; MEMORY MAPPED
.equ PCICR = 0x68 ; MEMORY MAPPED
.equ OSCCAL = 0x66 ; MEMORY MAPPED
.equ PRR = 0x64 ; MEMORY MAPPED
.equ CLKPR = 0x61 ; MEMORY MAPPED
.equ WDTCSR = 0x60 ; MEMORY MAPPED
.equ SREG = 0x3f
.equ SPL = 0x3d
.equ SPH = 0x3e
.equ SPMCSR = 0x37
.equ MCUCR = 0x35
.equ MCUSR = 0x34
.equ SMCR = 0x33
.equ ACSR = 0x30
.equ SPDR = 0x2e
.equ SPSR = 0x2d
.equ SPCR = 0x2c
.equ GPIOR2 = 0x2b
.equ GPIOR1 = 0x2a
.equ OCR0B = 0x28
.equ OCR0A = 0x27
.equ TCNT0 = 0x26
.equ TCCR0B = 0x25
.equ TCCR0A = 0x24
.equ GTCCR = 0x23
.equ EEARL = 0x21
.equ EEDR = 0x20
.equ EECR = 0x1f
.equ GPIOR0 = 0x1e
.equ EIMSK = 0x1d
.equ EIFR = 0x1c
.equ PCIFR = 0x1b
.equ TIFR2 = 0x17
.equ TIFR1 = 0x16
.equ TIFR0 = 0x15
.equ PORTD = 0x0b
.equ DDRD = 0x0a
.equ PIND = 0x09
.equ PORTC = 0x08
.equ DDRC = 0x07
.equ PINC = 0x06
.equ PORTB = 0x05
.equ DDRB = 0x04
.equ PINB = 0x03
; ***** BIT DEFINITIONS **************************************************
; ***** USART0 ***********************
; UDR0 - USART I/O Data Register
.equ UDR0_0 = 0 ; USART I/O Data Register bit 0
.equ UDR0_1 = 1 ; USART I/O Data Register bit 1
.equ UDR0_2 = 2 ; USART I/O Data Register bit 2
.equ UDR0_3 = 3 ; USART I/O Data Register bit 3
.equ UDR0_4 = 4 ; USART I/O Data Register bit 4
.equ UDR0_5 = 5 ; USART I/O Data Register bit 5
.equ UDR0_6 = 6 ; USART I/O Data Register bit 6
.equ UDR0_7 = 7 ; USART I/O Data Register bit 7
; UCSR0A - USART Control and Status Register A
.equ MPCM0 = 0 ; Multi-processor Communication Mode
.equ U2X0 = 1 ; Double the USART transmission speed
.equ UPE0 = 2 ; Parity Error
.equ DOR0 = 3 ; Data overRun
.equ FE0 = 4 ; Framing Error
.equ UDRE0 = 5 ; USART Data Register Empty
.equ TXC0 = 6 ; USART Transmitt Complete
.equ RXC0 = 7 ; USART Receive Complete
; UCSR0B - USART Control and Status Register B
.equ TXB80 = 0 ; Transmit Data Bit 8
.equ RXB80 = 1 ; Receive Data Bit 8
.equ UCSZ02 = 2 ; Character Size
.equ TXEN0 = 3 ; Transmitter Enable
.equ RXEN0 = 4 ; Receiver Enable
.equ UDRIE0 = 5 ; USART Data register Empty Interrupt Enable
.equ TXCIE0 = 6 ; TX Complete Interrupt Enable
.equ RXCIE0 = 7 ; RX Complete Interrupt Enable
; UCSR0C - USART Control and Status Register C
.equ UCPOL0 = 0 ; Clock Polarity
.equ UCSZ00 = 1 ; Character Size
.equ UCPHA0 = UCSZ00 ; For compatibility
.equ UCSZ01 = 2 ; Character Size
.equ UDORD0 = UCSZ01 ; For compatibility
.equ USBS0 = 3 ; Stop Bit Select
.equ UPM00 = 4 ; Parity Mode Bit 0
.equ UPM01 = 5 ; Parity Mode Bit 1
.equ UMSEL00 = 6 ; USART Mode Select
.equ UMSEL0 = UMSEL00 ; For compatibility
.equ UMSEL01 = 7 ; USART Mode Select
.equ UMSEL1 = UMSEL01 ; For compatibility
; UBRR0H - USART Baud Rate Register High Byte
.equ UBRR8 = 0 ; USART Baud Rate Register bit 8
.equ UBRR9 = 1 ; USART Baud Rate Register bit 9
.equ UBRR10 = 2 ; USART Baud Rate Register bit 10
.equ UBRR11 = 3 ; USART Baud Rate Register bit 11
; UBRR0L - USART Baud Rate Register Low Byte
.equ UBRR0 = 0 ; USART Baud Rate Register bit 0
.equ UBRR1 = 1 ; USART Baud Rate Register bit 1
.equ UBRR2 = 2 ; USART Baud Rate Register bit 2
.equ UBRR3 = 3 ; USART Baud Rate Register bit 3
.equ UBRR4 = 4 ; USART Baud Rate Register bit 4
.equ UBRR5 = 5 ; USART Baud Rate Register bit 5
.equ UBRR6 = 6 ; USART Baud Rate Register bit 6
.equ UBRR7 = 7 ; USART Baud Rate Register bit 7
; ***** TWI **************************
; TWAMR - TWI (Slave) Address Mask Register
.equ TWAM0 = 1 ;
.equ TWAMR0 = TWAM0 ; For compatibility
.equ TWAM1 = 2 ;
.equ TWAMR1 = TWAM1 ; For compatibility
.equ TWAM2 = 3 ;
.equ TWAMR2 = TWAM2 ; For compatibility
.equ TWAM3 = 4 ;
.equ TWAMR3 = TWAM3 ; For compatibility
.equ TWAM4 = 5 ;
.equ TWAMR4 = TWAM4 ; For compatibility
.equ TWAM5 = 6 ;
.equ TWAMR5 = TWAM5 ; For compatibility
.equ TWAM6 = 7 ;
.equ TWAMR6 = TWAM6 ; For compatibility
; TWBR - TWI Bit Rate register
.equ TWBR0 = 0 ;
.equ TWBR1 = 1 ;
.equ TWBR2 = 2 ;
.equ TWBR3 = 3 ;
.equ TWBR4 = 4 ;
.equ TWBR5 = 5 ;
.equ TWBR6 = 6 ;
.equ TWBR7 = 7 ;
; TWCR - TWI Control Register
.equ TWIE = 0 ; TWI Interrupt Enable
.equ TWEN = 2 ; TWI Enable Bit
.equ TWWC = 3 ; TWI Write Collition Flag
.equ TWSTO = 4 ; TWI Stop Condition Bit
.equ TWSTA = 5 ; TWI Start Condition Bit
.equ TWEA = 6 ; TWI Enable Acknowledge Bit
.equ TWINT = 7 ; TWI Interrupt Flag
; TWSR - TWI Status Register
.equ TWPS0 = 0 ; TWI Prescaler
.equ TWPS1 = 1 ; TWI Prescaler
.equ TWS3 = 3 ; TWI Status
.equ TWS4 = 4 ; TWI Status
.equ TWS5 = 5 ; TWI Status
.equ TWS6 = 6 ; TWI Status
.equ TWS7 = 7 ; TWI Status
; TWDR - TWI Data register
.equ TWD0 = 0 ; TWI Data Register Bit 0
.equ TWD1 = 1 ; TWI Data Register Bit 1
.equ TWD2 = 2 ; TWI Data Register Bit 2
.equ TWD3 = 3 ; TWI Data Register Bit 3
.equ TWD4 = 4 ; TWI Data Register Bit 4
.equ TWD5 = 5 ; TWI Data Register Bit 5
.equ TWD6 = 6 ; TWI Data Register Bit 6
.equ TWD7 = 7 ; TWI Data Register Bit 7
; TWAR - TWI (Slave) Address register
.equ TWGCE = 0 ; TWI General Call Recognition Enable Bit
.equ TWA0 = 1 ; TWI (Slave) Address register Bit 0
.equ TWA1 = 2 ; TWI (Slave) Address register Bit 1
.equ TWA2 = 3 ; TWI (Slave) Address register Bit 2
.equ TWA3 = 4 ; TWI (Slave) Address register Bit 3
.equ TWA4 = 5 ; TWI (Slave) Address register Bit 4
.equ TWA5 = 6 ; TWI (Slave) Address register Bit 5
.equ TWA6 = 7 ; TWI (Slave) Address register Bit 6
; ***** TIMER_COUNTER_1 **************
; TIMSK1 - Timer/Counter Interrupt Mask Register
.equ TOIE1 = 0 ; Timer/Counter1 Overflow Interrupt Enable
.equ OCIE1A = 1 ; Timer/Counter1 Output CompareA Match Interrupt Enable
.equ OCIE1B = 2 ; Timer/Counter1 Output CompareB Match Interrupt Enable
.equ ICIE1 = 5 ; Timer/Counter1 Input Capture Interrupt Enable
; TIFR1 - Timer/Counter Interrupt Flag register
.equ TOV1 = 0 ; Timer/Counter1 Overflow Flag
.equ OCF1A = 1 ; Output Compare Flag 1A
.equ OCF1B = 2 ; Output Compare Flag 1B
.equ ICF1 = 5 ; Input Capture Flag 1
; TCCR1A - Timer/Counter1 Control Register A
.equ WGM10 = 0 ; Waveform Generation Mode
.equ WGM11 = 1 ; Waveform Generation Mode
.equ COM1B0 = 4 ; Compare Output Mode 1B, bit 0
.equ COM1B1 = 5 ; Compare Output Mode 1B, bit 1
.equ COM1A0 = 6 ; Comparet Ouput Mode 1A, bit 0
.equ COM1A1 = 7 ; Compare Output Mode 1A, bit 1
; TCCR1B - Timer/Counter1 Control Register B
.equ CS10 = 0 ; Prescaler source of Timer/Counter 1
.equ CS11 = 1 ; Prescaler source of Timer/Counter 1
.equ CS12 = 2 ; Prescaler source of Timer/Counter 1
.equ WGM12 = 3 ; Waveform Generation Mode
.equ WGM13 = 4 ; Waveform Generation Mode
.equ ICES1 = 6 ; Input Capture 1 Edge Select
.equ ICNC1 = 7 ; Input Capture 1 Noise Canceler
; TCCR1C - Timer/Counter1 Control Register C
.equ FOC1B = 6 ;
.equ FOC1A = 7 ;
; GTCCR - General Timer/Counter Control Register
.equ PSRSYNC = 0 ; Prescaler Reset Timer/Counter1 and Timer/Counter0
.equ TSM = 7 ; Timer/Counter Synchronization Mode
; ***** TIMER_COUNTER_2 **************
; TIMSK2 - Timer/Counter Interrupt Mask register
.equ TOIE2 = 0 ; Timer/Counter2 Overflow Interrupt Enable
.equ TOIE2A = TOIE2 ; For compatibility
.equ OCIE2A = 1 ; Timer/Counter2 Output Compare Match A Interrupt Enable
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -