4433def.inc

AVR Assembler 2 compiler

;***** THIS IS A MACHINE GENERATED FILE - DO NOT EDIT ********************
;***** Created: 2007-12-13 07:27 ******* Source: AT90S4433.xml ***********
;*************************************************************************
;* A P P L I C A T I O N   N O T E   F O R   T H E   A V R   F A M I L Y
;* 
;* Number            : AVR000
;* File Name         : "4433def.inc"
;* Title             : Register/Bit Definitions for the AT90S4433
;* Date              : 2007-12-13
;* Version           : 2.24
;* Support E-mail    : [e-mail]
;* Target MCU        : AT90S4433
;* 
;* DESCRIPTION
;* When including this file in the assembly program file, all I/O register 
;* names and I/O register bit names appearing in the data book can be used.
;* In addition, the six registers forming the three data pointers X, Y and 
;* Z have been assigned names XL - ZH. Highest RAM address for Internal 
;* SRAM is also defined 
;* 
;* The Register names are represented by their hexadecimal address.
;* 
;* The Register Bit names are represented by their bit number (0-7).
;* 
;* Please observe the difference in using the bit names with instructions
;* such as "sbr"/"cbr" (set/clear bit in register) and "sbrs"/"sbrc"
;* (skip if bit in register set/cleared). The following example illustrates
;* this:
;* 
;* in    r16,PORTB             ;read PORTB latch
;* sbr   r16,(1<<PB6)+(1<<PB5) ;set PB6 and PB5 (use masks, not bit#)
;* out   PORTB,r16             ;output to PORTB
;* 
;* in    r16,TIFR              ;read the Timer Interrupt Flag Register
;* sbrc  r16,TOV0              ;test the overflow flag (use bit#)
;* rjmp  TOV0_is_set           ;jump if set
;* ...                         ;otherwise do something else
;*************************************************************************

#ifndef _4433DEF_INC_
#define _4433DEF_INC_


#pragma partinc 0

; ***** SPECIFY DEVICE ***************************************************
.device AT90S4433
#pragma AVRPART ADMIN PART_NAME AT90S4433
.equ	SIGNATURE_000	= 0x1e
.equ	SIGNATURE_001	= 0x92
.equ	SIGNATURE_002	= 0x03

#pragma AVRPART CORE CORE_VERSION V1


; ***** I/O REGISTER DEFINITIONS *****************************************
; NOTE:
; Definitions marked "MEMORY MAPPED"are extended I/O ports
; and cannot be used with IN/OUT instructions
.equ	SREG	= 0x3f
.equ	SP	= 0x3d
.equ	GIMSK	= 0x3b
.equ	GIFR	= 0x3a
.equ	TIMSK	= 0x39
.equ	TIFR	= 0x38
.equ	MCUCR	= 0x35
.equ	MCUSR	= 0x34
.equ	TCCR0	= 0x33
.equ	TCNT0	= 0x32
.equ	TCCR1A	= 0x2f
.equ	TCCR1B	= 0x2e
.equ	TCNT1L	= 0x2c
.equ	TCNT1H	= 0x2d
.equ	OCR1L	= 0x2a
.equ	OCR1H	= 0x2b
.equ	ICR1L	= 0x26
.equ	ICR1H	= 0x27
.equ	WDTCR	= 0x21
.equ	EEAR	= 0x1e
.equ	EEDR	= 0x1d
.equ	EECR	= 0x1c
.equ	PORTB	= 0x18
.equ	DDRB	= 0x17
.equ	PINB	= 0x16
.equ	PORTC	= 0x15
.equ	DDRC	= 0x14
.equ	PINC	= 0x13
.equ	PORTD	= 0x12
.equ	DDRD	= 0x11
.equ	PIND	= 0x10
.equ	SPDR	= 0x0f
.equ	SPSR	= 0x0e
.equ	SPCR	= 0x0d
.equ	UDR	= 0x0c
.equ	UCSRA	= 0x0b
.equ	UCSRB	= 0x0a
.equ	UBRR	= 0x09
.equ	ACSR	= 0x08
.equ	ADMUX	= 0x07
.equ	ADCSR	= 0x06
.equ	ADCH	= 0x05
.equ	ADCL	= 0x04
.equ	UBRRHI	= 0x03


; ***** BIT DEFINITIONS **************************************************

; ***** ANALOG_COMPARATOR ************
; ACSR - Analog Comparator Control And Status Register
.equ	ACIS0	= 0	; Analog Comparator Interrupt Mode Select bit 0
.equ	ACIS1	= 1	; Analog Comparator Interrupt Mode Select bit 1
.equ	ACIC	= 2	; Analog Comparator Input Capture Enable
.equ	ACIE	= 3	; Analog Comparator Interrupt Enable
.equ	ACI	= 4	; Analog Comparator Interrupt Flag
.equ	ACO	= 5	; Analog Compare Output
.equ	AINBG	= 6	; Analog Comparator Bandgap Select
.equ	ACD	= 7	; Analog Comparator Disable


; ***** AD_CONVERTER *****************
; ADMUX - The ADC multiplexer Selection Register
.equ	MUX0	= 0	; Analog Channel and Gain Selection Bits
.equ	MUX1	= 1	; Analog Channel and Gain Selection Bits
.equ	MUX2	= 2	; Analog Channel and Gain Selection Bits
.equ	ADCBG	= 6	; ADC Bandgap Select

; ADCSR - The ADC Control and Status register
.equ	ADPS0	= 0	; ADC  Prescaler Select Bits
.equ	ADPS1	= 1	; ADC  Prescaler Select Bits
.equ	ADPS2	= 2	; ADC  Prescaler Select Bits
.equ	ADIE	= 3	; ADC Interrupt Enable
.equ	ADIF	= 4	; ADC Interrupt Flag
.equ	ADFR	= 5	; ADC  Free Running Select
.equ	ADSC	= 6	; ADC Start Conversion
.equ	ADEN	= 7	; ADC Enable

; ADCH - ADC Data Register High Byte
.equ	ADC8	= 0	; ADC Data Register High Byte Bit 0
.equ	ADC9	= 1	; ADC Data Register High Byte Bit 1

; ADCL - ADC Data Register Low Byte
.equ	ADC0	= 0	; ADC Data Register Low Byte Bit 0
.equ	ADC1	= 1	; ADC Data Register Low Byte Bit 1
.equ	ADC2	= 2	; ADC Data Register Low Byte Bit 2
.equ	ADC3	= 3	; ADC Data Register Low Byte Bit 3
.equ	ADC4	= 4	; ADC Data Register Low Byte Bit 4
.equ	ADC5	= 5	; ADC Data Register Low Byte Bit 5
.equ	ADC6	= 6	; ADC Data Register Low Byte Bit 6
.equ	ADC7	= 7	; ADC Data Register Low Byte Bit 7


; ***** UART *************************
; UDR - UART I/O Data Register
.equ	UDR0	= 0	; UART I/O Data Register bit 0
.equ	UDR1	= 1	; UART I/O Data Register bit 1
.equ	UDR2	= 2	; UART I/O Data Register bit 2
.equ	UDR3	= 3	; UART I/O Data Register bit 3
.equ	UDR4	= 4	; UART I/O Data Register bit 4
.equ	UDR5	= 5	; UART I/O Data Register bit 5
.equ	UDR6	= 6	; UART I/O Data Register bit 6
.equ	UDR7	= 7	; UART I/O Data Register bit 7

; UCSRA - UART Control and Status register A
.equ	MPCM	= 0	; Mulit-processor Communication Mode
.equ	DOR	= 3	; Data overRun
.equ	FE	= 4	; Framing Error
.equ	UDRE	= 5	; UART Data Register Empty
.equ	TXC	= 6	; UART Transmitt Complete
.equ	RXC	= 7	; UART Receive Complete

; UCSRB - UART Control an Status register B
.equ	TXB8	= 0	; Transmit Data Bit 8
.equ	RXB8	= 1	; Receive Data Bit 8
.equ	CHR9	= 2	; 9-bit Characters
.equ	TXEN	= 3	; Transmitter Enable
.equ	RXEN	= 4	; Receiver Enable
.equ	UDRIE	= 5	; UART Data Register Empty Interrupt Enable
.equ	TXCIE	= 6	; TX Complete Interrupt Enable
.equ	RXCIE	= 7	; RX Complete Interrupt Enable

; UBRRHI - UART Baud Rate Register High Byte
.equ	UBRRHI0	= 0	; UART Baud Rate Register High Byte bit 0
.equ	UBRRHI1	= 1	; UART Baud Rate Register High Byte bit 1
.equ	UBRRHI2	= 2	; UART Baud Rate Register High Byte bit 2
.equ	UBRRHI3	= 3	; UART Baud Rate Register High Byte bit 3

; UBRR - UART Baud Rate Register
.equ	UBRR0	= 0	; UART Baud Rate Register bit 0
.equ	UBRR1	= 1	; UART Baud Rate Register bit 1
.equ	UBRR2	= 2	; UART Baud Rate Register bit 2
.equ	UBRR3	= 3	; UART Baud Rate Register bit 3
.equ	UBRR4	= 4	; UART Baud Rate Register bit 4
.equ	UBRR5	= 5	; UART Baud Rate Register bit 5
.equ	UBRR6	= 6	; UART Baud Rate Register bit 6
.equ	UBRR7	= 7	; UART Baud Rate Register bit 7


; ***** SPI **************************
; SPDR - SPI Data Register
.equ	SPDR0	= 0	; SPI Data Register bit 0
.equ	SPDR1	= 1	; SPI Data Register bit 1
.equ	SPDR2	= 2	; SPI Data Register bit 2
.equ	SPDR3	= 3	; SPI Data Register bit 3
.equ	SPDR4	= 4	; SPI Data Register bit 4
.equ	SPDR5	= 5	; SPI Data Register bit 5
.equ	SPDR6	= 6	; SPI Data Register bit 6
.equ	SPDR7	= 7	; SPI Data Register bit 7

; SPSR - SPI Status Register
.equ	WCOL	= 6	; Write Collision Flag
.equ	SPIF	= 7	; SPI Interrupt Flag

; SPCR - SPI Control Register
.equ	SPR0	= 0	; SPI Clock Rate Select 0
.equ	SPR1	= 1	; SPI Clock Rate Select 1
.equ	CPHA	= 2	; Clock Phase
.equ	CPOL	= 3	; Clock polarity
.equ	MSTR	= 4	; Master/Slave Select
.equ	DORD	= 5	; Data Order
.equ	SPE	= 6	; SPI Enable
.equ	SPIE	= 7	; SPI Interrupt Enable


; ***** CPU **************************
; SREG - Status Register
.equ	SREG_C	= 0	; Carry Flag
.equ	SREG_Z	= 1	; Zero Flag
.equ	SREG_N	= 2	; Negative Flag
.equ	SREG_V	= 3	; Two's Complement Overflow Flag
.equ	SREG_S	= 4	; Sign Bit
.equ	SREG_H	= 5	; Half Carry Flag
.equ	SREG_T	= 6	; Bit Copy Storage
.equ	SREG_I	= 7	; Global Interrupt Enable

; SP - Stack Pointer
.equ	SP0	= 0	; Stack pointer bit 0
.equ	SP1	= 1	; Stack pointer bit 1
.equ	SP2	= 2	; Stack pointer bit 2
.equ	SP3	= 3	; Stack pointer bit 3
.equ	SP4	= 4	; Stack pointer bit 4
.equ	SP5	= 5	; Stack pointer bit 5
.equ	SP6	= 6	; Stack pointer bit 6
.equ	SP7	= 7	; Stack pointer bit 7

; MCUCR - MCU Control Register
.equ	ISC00	= 0	; Interrupt Sense Control 0 bit 0
.equ	ISC01	= 1	; Interrupt Sense Control 0 bit 1
.equ	ISC10	= 2	; Interrupt Sense Control 1 bit 0
.equ	ISC11	= 3	; Interrupt Sense Control 1 bit 1
.equ	SM	= 4	; Sleep Mode Select
.equ	SE	= 5	; Sleep Enable

; MCUSR - 
.equ	PORF	= 0	; Power-on Reset Flag
.equ	EXTRF	= 1	; External Reset Flag
.equ	BORF	= 2	; Brown-Out Reset Flag
.equ	WDRF	= 3	; Watchdog Reset Flag


; ***** EXTERNAL_INTERRUPT ***********
; GIMSK - General Interrupt Mask Register
.equ	INT0	= 6	; External Interrupt Request 0 Enable