m649def.inc

AVR Assembler 2 compiler

;***** THIS IS A MACHINE GENERATED FILE - DO NOT EDIT ********************
;***** Created: 2007-12-13 07:27 ******* Source: ATmega649.xml ***********
;*************************************************************************
;* A P P L I C A T I O N   N O T E   F O R   T H E   A V R   F A M I L Y
;* 
;* Number            : AVR000
;* File Name         : "m649def.inc"
;* Title             : Register/Bit Definitions for the ATmega649
;* Date              : 2007-12-13
;* Version           : 2.24
;* Support E-mail    : [e-mail]
;* Target MCU        : ATmega649
;* 
;* DESCRIPTION
;* When including this file in the assembly program file, all I/O register 
;* names and I/O register bit names appearing in the data book can be used.
;* In addition, the six registers forming the three data pointers X, Y and 
;* Z have been assigned names XL - ZH. Highest RAM address for Internal 
;* SRAM is also defined 
;* 
;* The Register names are represented by their hexadecimal address.
;* 
;* The Register Bit names are represented by their bit number (0-7).
;* 
;* Please observe the difference in using the bit names with instructions
;* such as "sbr"/"cbr" (set/clear bit in register) and "sbrs"/"sbrc"
;* (skip if bit in register set/cleared). The following example illustrates
;* this:
;* 
;* in    r16,PORTB             ;read PORTB latch
;* sbr   r16,(1<<PB6)+(1<<PB5) ;set PB6 and PB5 (use masks, not bit#)
;* out   PORTB,r16             ;output to PORTB
;* 
;* in    r16,TIFR              ;read the Timer Interrupt Flag Register
;* sbrc  r16,TOV0              ;test the overflow flag (use bit#)
;* rjmp  TOV0_is_set           ;jump if set
;* ...                         ;otherwise do something else
;*************************************************************************

#ifndef _M649DEF_INC_
#define _M649DEF_INC_


#pragma partinc 0

; ***** SPECIFY DEVICE ***************************************************
.device ATmega649
#pragma AVRPART ADMIN PART_NAME ATmega649
.equ	SIGNATURE_000	= 0x1e
.equ	SIGNATURE_001	= 0x96
.equ	SIGNATURE_002	= 0x03

#pragma AVRPART CORE CORE_VERSION V2E


; ***** I/O REGISTER DEFINITIONS *****************************************
; NOTE:
; Definitions marked "MEMORY MAPPED"are extended I/O ports
; and cannot be used with IN/OUT instructions
.equ	LCDDR19	= 0xff	; MEMORY MAPPED
.equ	LCDDR18	= 0xfe	; MEMORY MAPPED
.equ	LCDDR17	= 0xfd	; MEMORY MAPPED
.equ	LCDDR16	= 0xfc	; MEMORY MAPPED
.equ	LCDDR15	= 0xfb	; MEMORY MAPPED
.equ	LCDDR14	= 0xfa	; MEMORY MAPPED
.equ	LCDDR13	= 0xf9	; MEMORY MAPPED
.equ	LCDDR12	= 0xf8	; MEMORY MAPPED
.equ	LCDDR11	= 0xf7	; MEMORY MAPPED
.equ	LCDDR10	= 0xf6	; MEMORY MAPPED
.equ	LCDDR9	= 0xf5	; MEMORY MAPPED
.equ	LCDDR8	= 0xf4	; MEMORY MAPPED
.equ	LCDDR7	= 0xf3	; MEMORY MAPPED
.equ	LCDDR6	= 0xf2	; MEMORY MAPPED
.equ	LCDDR5	= 0xf1	; MEMORY MAPPED
.equ	LCDDR4	= 0xf0	; MEMORY MAPPED
.equ	LCDDR3	= 0xef	; MEMORY MAPPED
.equ	LCDDR2	= 0xee	; MEMORY MAPPED
.equ	LCDDR1	= 0xed	; MEMORY MAPPED
.equ	LCDDR0	= 0xec	; MEMORY MAPPED
.equ	LCDCCR	= 0xe7	; MEMORY MAPPED
.equ	LCDFRR	= 0xe6	; MEMORY MAPPED
.equ	LCDCRB	= 0xe5	; MEMORY MAPPED
.equ	LCDCRA	= 0xe4	; MEMORY MAPPED
.equ	UDR0	= 0xc6	; MEMORY MAPPED
.equ	UBRR0L	= 0xc4	; MEMORY MAPPED
.equ	UBRR0H	= 0xc5	; MEMORY MAPPED
.equ	UCSR0C	= 0xc2	; MEMORY MAPPED
.equ	UCSR0B	= 0xc1	; MEMORY MAPPED
.equ	UCSR0A	= 0xc0	; MEMORY MAPPED
.equ	USIDR	= 0xba	; MEMORY MAPPED
.equ	USISR	= 0xb9	; MEMORY MAPPED
.equ	USICR	= 0xb8	; MEMORY MAPPED
.equ	ASSR	= 0xb6	; MEMORY MAPPED
.equ	OCR2A	= 0xb3	; MEMORY MAPPED
.equ	TCNT2	= 0xb2	; MEMORY MAPPED
.equ	TCCR2A	= 0xb0	; MEMORY MAPPED
.equ	OCR1BL	= 0x8a	; MEMORY MAPPED
.equ	OCR1BH	= 0x8b	; MEMORY MAPPED
.equ	OCR1AL	= 0x88	; MEMORY MAPPED
.equ	OCR1AH	= 0x89	; MEMORY MAPPED
.equ	ICR1L	= 0x86	; MEMORY MAPPED
.equ	ICR1H	= 0x87	; MEMORY MAPPED
.equ	TCNT1L	= 0x84	; MEMORY MAPPED
.equ	TCNT1H	= 0x85	; MEMORY MAPPED
.equ	TCCR1C	= 0x82	; MEMORY MAPPED
.equ	TCCR1B	= 0x81	; MEMORY MAPPED
.equ	TCCR1A	= 0x80	; MEMORY MAPPED
.equ	DIDR1	= 0x7f	; MEMORY MAPPED
.equ	DIDR0	= 0x7e	; MEMORY MAPPED
.equ	ADMUX	= 0x7c	; MEMORY MAPPED
.equ	ADCSRB	= 0x7b	; MEMORY MAPPED
.equ	ADCSRA	= 0x7a	; MEMORY MAPPED
.equ	ADCH	= 0x79	; MEMORY MAPPED
.equ	ADCL	= 0x78	; MEMORY MAPPED
.equ	TIMSK2	= 0x70	; MEMORY MAPPED
.equ	TIMSK1	= 0x6f	; MEMORY MAPPED
.equ	TIMSK0	= 0x6e	; MEMORY MAPPED
.equ	PCMSK0	= 0x6b	; MEMORY MAPPED
.equ	PCMSK1	= 0x6c	; MEMORY MAPPED
.equ	EICRA	= 0x69	; MEMORY MAPPED
.equ	OSCCAL	= 0x66	; MEMORY MAPPED
.equ	PRR	= 0x64	; MEMORY MAPPED
.equ	CLKPR	= 0x61	; MEMORY MAPPED
.equ	WDTCR	= 0x60	; MEMORY MAPPED
.equ	SREG	= 0x3f
.equ	SPL	= 0x3d
.equ	SPH	= 0x3e
.equ	SPMCSR	= 0x37
.equ	MCUCR	= 0x35
.equ	MCUSR	= 0x34
.equ	SMCR	= 0x33
.equ	OCDR	= 0x31
.equ	ACSR	= 0x30
.equ	SPDR	= 0x2e
.equ	SPSR	= 0x2d
.equ	SPCR	= 0x2c
.equ	GPIOR2	= 0x2b
.equ	GPIOR1	= 0x2a
.equ	OCR0A	= 0x27
.equ	TCNT0	= 0x26
.equ	TCCR0A	= 0x24
.equ	GTCCR	= 0x23
.equ	EEARL	= 0x21
.equ	EEARH	= 0x22
.equ	EEDR	= 0x20
.equ	EECR	= 0x1f
.equ	GPIOR0	= 0x1e
.equ	EIMSK	= 0x1d
.equ	EIFR	= 0x1c
.equ	TIFR2	= 0x17
.equ	TIFR1	= 0x16
.equ	TIFR0	= 0x15
.equ	PORTG	= 0x14
.equ	DDRG	= 0x13
.equ	PING	= 0x12
.equ	PORTF	= 0x11
.equ	DDRF	= 0x10
.equ	PINF	= 0x0f
.equ	PORTE	= 0x0e
.equ	DDRE	= 0x0d
.equ	PINE	= 0x0c
.equ	PORTD	= 0x0b
.equ	DDRD	= 0x0a
.equ	PIND	= 0x09
.equ	PORTC	= 0x08
.equ	DDRC	= 0x07
.equ	PINC	= 0x06
.equ	PORTB	= 0x05
.equ	DDRB	= 0x04
.equ	PINB	= 0x03
.equ	PORTA	= 0x02
.equ	DDRA	= 0x01
.equ	PINA	= 0x00


; ***** BIT DEFINITIONS **************************************************

; ***** AD_CONVERTER *****************
; ADMUX - The ADC multiplexer Selection Register
.equ	MUX0	= 0	; Analog Channel and Gain Selection Bits
.equ	MUX1	= 1	; Analog Channel and Gain Selection Bits
.equ	MUX2	= 2	; Analog Channel and Gain Selection Bits
.equ	MUX3	= 3	; Analog Channel and Gain Selection Bits
.equ	MUX4	= 4	; Analog Channel and Gain Selection Bits
.equ	ADLAR	= 5	; Left Adjust Result
.equ	REFS0	= 6	; Reference Selection Bit 0
.equ	REFS1	= 7	; Reference Selection Bit 1

; ADCSRA - The ADC Control and Status register
.equ	ADPS0	= 0	; ADC  Prescaler Select Bits
.equ	ADPS1	= 1	; ADC  Prescaler Select Bits
.equ	ADPS2	= 2	; ADC  Prescaler Select Bits
.equ	ADIE	= 3	; ADC Interrupt Enable
.equ	ADIF	= 4	; ADC Interrupt Flag
.equ	ADATE	= 5	; ADC Auto Trigger Enable
.equ	ADSC	= 6	; ADC Start Conversion
.equ	ADEN	= 7	; ADC Enable

; ADCH - ADC Data Register High Byte
.equ	ADCH0	= 0	; ADC Data Register High Byte Bit 0
.equ	ADCH1	= 1	; ADC Data Register High Byte Bit 1
.equ	ADCH2	= 2	; ADC Data Register High Byte Bit 2
.equ	ADCH3	= 3	; ADC Data Register High Byte Bit 3
.equ	ADCH4	= 4	; ADC Data Register High Byte Bit 4
.equ	ADCH5	= 5	; ADC Data Register High Byte Bit 5
.equ	ADCH6	= 6	; ADC Data Register High Byte Bit 6
.equ	ADCH7	= 7	; ADC Data Register High Byte Bit 7

; ADCL - ADC Data Register Low Byte
.equ	ADCL0	= 0	; ADC Data Register Low Byte Bit 0
.equ	ADCL1	= 1	; ADC Data Register Low Byte Bit 1
.equ	ADCL2	= 2	; ADC Data Register Low Byte Bit 2
.equ	ADCL3	= 3	; ADC Data Register Low Byte Bit 3
.equ	ADCL4	= 4	; ADC Data Register Low Byte Bit 4
.equ	ADCL5	= 5	; ADC Data Register Low Byte Bit 5
.equ	ADCL6	= 6	; ADC Data Register Low Byte Bit 6
.equ	ADCL7	= 7	; ADC Data Register Low Byte Bit 7

; ADCSRB - ADC Control and Status Register B
.equ	ADTS0	= 0	; ADC Auto Trigger Source 0
.equ	ADTS1	= 1	; ADC Auto Trigger Source 1
.equ	ADTS2	= 2	; ADC Auto Trigger Source 2

; DIDR0 - Digital Input Disable Register 0
.equ	ADC0D	= 0	; ADC0 Digital input Disable
.equ	ADC1D	= 1	; ADC1 Digital input Disable
.equ	ADC2D	= 2	; ADC2 Digital input Disable
.equ	ADC3D	= 3	; ADC3 Digital input Disable
.equ	ADC4D	= 4	; ADC4 Digital input Disable
.equ	ADC5D	= 5	; ADC5 Digital input Disable
.equ	ADC6D	= 6	; ADC6 Digital input Disable
.equ	ADC7D	= 7	; ADC7 Digital input Disable


; ***** ANALOG_COMPARATOR ************
; ADCSRB - ADC Control and Status Register B
.equ	ACME	= 6	; Analog Comparator Multiplexer Enable

; ACSR - Analog Comparator Control And Status Register
.equ	ACIS0	= 0	; Analog Comparator Interrupt Mode Select bit 0
.equ	ACIS1	= 1	; Analog Comparator Interrupt Mode Select bit 1
.equ	ACIC	= 2	; Analog Comparator Input Capture Enable
.equ	ACIE	= 3	; Analog Comparator Interrupt Enable
.equ	ACI	= 4	; Analog Comparator Interrupt Flag
.equ	ACO	= 5	; Analog Compare Output
.equ	ACBG	= 6	; Analog Comparator Bandgap Select
.equ	ACD	= 7	; Analog Comparator Disable

; DIDR1 - Digital Input Disable Register 1
.equ	AIN0D	= 0	; AIN0 Digital Input Disable
.equ	AIN1D	= 1	; AIN1 Digital Input Disable


; ***** SPI **************************
; SPDR - SPI Data Register
.equ	SPDR0	= 0	; SPI Data Register bit 0
.equ	SPDR1	= 1	; SPI Data Register bit 1
.equ	SPDR2	= 2	; SPI Data Register bit 2
.equ	SPDR3	= 3	; SPI Data Register bit 3
.equ	SPDR4	= 4	; SPI Data Register bit 4
.equ	SPDR5	= 5	; SPI Data Register bit 5
.equ	SPDR6	= 6	; SPI Data Register bit 6
.equ	SPDR7	= 7	; SPI Data Register bit 7

; SPSR - SPI Status Register
.equ	SPI2X	= 0	; Double SPI Speed Bit
.equ	WCOL	= 6	; Write Collision Flag
.equ	SPIF	= 7	; SPI Interrupt Flag

; SPCR - SPI Control Register
.equ	SPR0	= 0	; SPI Clock Rate Select 0
.equ	SPR1	= 1	; SPI Clock Rate Select 1
.equ	CPHA	= 2	; Clock Phase
.equ	CPOL	= 3	; Clock polarity
.equ	MSTR	= 4	; Master/Slave Select
.equ	DORD	= 5	; Data Order
.equ	SPE	= 6	; SPI Enable
.equ	SPIE	= 7	; SPI Interrupt Enable


; ***** USI **************************
; USIDR - USI Data Register
.equ	USIDR0	= 0	; USI Data Register bit 0
.equ	USIDR1	= 1	; USI Data Register bit 1
.equ	USIDR2	= 2	; USI Data Register bit 2
.equ	USIDR3	= 3	; USI Data Register bit 3
.equ	USIDR4	= 4	; USI Data Register bit 4
.equ	USIDR5	= 5	; USI Data Register bit 5
.equ	USIDR6	= 6	; USI Data Register bit 6
.equ	USIDR7	= 7	; USI Data Register bit 7

; USISR - USI Status Register
.equ	USICNT0	= 0	; USI Counter Value Bit 0
.equ	USICNT1	= 1	; USI Counter Value Bit 1
.equ	USICNT2	= 2	; USI Counter Value Bit 2
.equ	USICNT3	= 3	; USI Counter Value Bit 3
.equ	USIDC	= 4	; Data Output Collision
.equ	USIPF	= 5	; Stop Condition Flag
.equ	USIOIF	= 6	; Counter Overflow Interrupt Flag
.equ	USISIF	= 7	; Start Condition Interrupt Flag

; USICR - USI Control Register
.equ	USITC	= 0	; Toggle Clock Port Pin
.equ	USICLK	= 1	; Clock Strobe
.equ	USICS0	= 2	; USI Clock Source Select Bit 0
.equ	USICS1	= 3	; USI Clock Source Select Bit 1
.equ	USIWM0	= 4	; USI Wire Mode Bit 0
.equ	USIWM1	= 5	; USI Wire Mode Bit 1
.equ	USIOIE	= 6	; Counter Overflow Interrupt Enable
.equ	USISIE	= 7	; Start Condition Interrupt Enable


; ***** USART0 ***********************
; UDR0 - USART I/O Data Register
.equ	UDR	= UDR0	; For compatibility
.equ	UDR00	= 0	; USART I/O Data Register bit 0
.equ	UDR01	= 1	; USART I/O Data Register bit 1
.equ	UDR02	= 2	; USART I/O Data Register bit 2
.equ	UDR03	= 3	; USART I/O Data Register bit 3
.equ	UDR04	= 4	; USART I/O Data Register bit 4
.equ	UDR05	= 5	; USART I/O Data Register bit 5
.equ	UDR06	= 6	; USART I/O Data Register bit 6
.equ	UDR07	= 7	; USART I/O Data Register bit 7

; UCSR0A - USART Control and Status Register A
.equ	UCSRA	= UCSR0A	; For compatibility
.equ	USR	= UCSR0A	; For compatibility
.equ	MPCM0	= 0	; Multi-processor Communication Mode
.equ	MPCM	= MPCM0	; For compatibility
.equ	U2X0	= 1	; Double the USART Transmission Speed
.equ	U2X	= U2X0	; For compatibility
.equ	UPE0	= 2	; USART Parity Error
.equ	UPE	= UPE0	; For compatibility
.equ	DOR0	= 3	; Data OverRun
.equ	DOR	= DOR0	; For compatibility
.equ	FE0	= 4	; Framing Error
.equ	FE	= FE0	; For compatibility
.equ	UDRE0	= 5	; USART Data Register Empty
.equ	UDRE	= UDRE0	; For compatibility
.equ	TXC0	= 6	; USART Transmit Complete
.equ	TXC	= TXC0	; For compatibility
.equ	RXC0	= 7	; USART Receive Complete
.equ	RXC	= RXC0	; For compatibility

; UCSR0B - USART Control and Status Register B
.equ	UCSRB	= UCSR0B	; For compatibility
.equ	UCR	= UCSR0B	; For compatibility
.equ	TXB80	= 0	; Transmit Data Bit 8
.equ	TXB8	= TXB80	; For compatibility
.equ	RXB80	= 1	; Receive Data Bit 8
.equ	RXB8	= RXB80	; For compatibility
.equ	UCSZ02	= 2	; Character Size
.equ	UCSZ2	= UCSZ02	; For compatibility
.equ	TXEN0	= 3	; Transmitter Enable
.equ	TXEN	= TXEN0	; For compatibility
.equ	RXEN0	= 4	; Receiver Enable
.equ	RXEN	= RXEN0	; For compatibility
.equ	UDRIE0	= 5	; USART Data Register Empty Interrupt Enable
.equ	UDRIE	= UDRIE0	; For compatibility
.equ	TXCIE0	= 6	; TX Complete Interrupt Enable
.equ	TXCIE	= TXCIE0	; For compatibility
.equ	RXCIE0	= 7	; RX Complete Interrupt Enable
.equ	RXCIE	= RXCIE0	; For compatibility

; UCSR0C - USART Control and Status Register C
.equ	UCSRC	= UCSR0C	; For compatibility
.equ	UCPOL0	= 0	; Clock Polarity
.equ	UCPOL	= UCPOL0	; For compatibility
.equ	UCSZ00	= 1	; Character Size
.equ	UCSZ0	= UCSZ00	; For compatibility
.equ	UCSZ01	= 2	; Character Size
.equ	UCSZ1	= UCSZ01	; For compatibility
.equ	USBS0	= 3	; Stop Bit Select
.equ	USBS	= USBS0	; For compatibility
.equ	UPM00	= 4	; Parity Mode Bit 0
.equ	UPM0	= UPM00	; For compatibility
.equ	UPM01	= 5	; Parity Mode Bit 1
.equ	UPM1	= UPM01	; For compatibility
.equ	UMSEL0	= 6	; USART Mode Select
.equ	UMSEL	= UMSEL0	; For compatibility

; UBRR0H - USART Baud Rate Register High Byte
.equ	UBRRH	= UBRR0H	; For compatibility
.equ	UBRR8	= 0	; USART Baud Rate Register bit 8
.equ	UBRR9	= 1	; USART Baud Rate Register bit 9
.equ	UBRR10	= 2	; USART Baud Rate Register bit 10
.equ	UBRR11	= 3	; USART Baud Rate Register bit 11

; UBRR0L - USART Baud Rate Register Low Byte
.equ	UBRRL	= UBRR0L	; For compatibility
.equ	UBRR	= UBRR0L	; For compatibility
.equ	UBRR0	= 0	; USART Baud Rate Register bit 0
.equ	UBRR1	= 1	; USART Baud Rate Register bit 1
.equ	UBRR2	= 2	; USART Baud Rate Register bit 2
.equ	UBRR3	= 3	; USART Baud Rate Register bit 3
.equ	UBRR4	= 4	; USART Baud Rate Register bit 4
.equ	UBRR5	= 5	; USART Baud Rate Register bit 5
.equ	UBRR6	= 6	; USART Baud Rate Register bit 6
.equ	UBRR7	= 7	; USART Baud Rate Register bit 7


; ***** CPU **************************
; SREG - Status Register
.equ	SREG_C	= 0	; Carry Flag
.equ	SREG_Z	= 1	; Zero Flag
.equ	SREG_N	= 2	; Negative Flag
.equ	SREG_V	= 3	; Two's Complement Overflow Flag
.equ	SREG_S	= 4	; Sign Bit
.equ	SREG_H	= 5	; Half Carry Flag
.equ	SREG_T	= 6	; Bit Copy Storage
.equ	SREG_I	= 7	; Global Interrupt Enable

; MCUCR - MCU Control Register
.equ	IVCE	= 0	; Interrupt Vector Change Enable
.equ	IVSEL	= 1	; Interrupt Vector Select
.equ	PUD	= 4	; Pull-up disable

; MCUSR - MCU Status Register
.equ	PORF	= 0	; Power-on reset flag
.equ	EXTRF	= 1	; External Reset Flag
.equ	BORF	= 2	; Brown-out Reset Flag
.equ	WDRF	= 3	; Watchdog Reset Flag
.equ	JTRF	= 4	; JTAG Reset Flag