⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 lcd_osk.c

📁 Linux环境下视频显示卡设备的驱动程序源代码
💻 C
字号:
/* * LCD panel support for the TI OMAP OSK board * * Copyright (C) 2004 Nokia Corporation * Author: Imre Deak <imre.deak@nokia.com> * Adapted for OSK by <dirk.behme@de.bosch.com> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA. */#include <linux/module.h>#include <linux/platform_device.h>#include <mach/gpio.h>#include <mach/mux.h>#include <mach/omapfb.h>static int osk_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev){	/* gpio2 was allocated in board init */	return 0;}static void osk_panel_cleanup(struct lcd_panel *panel){}static int osk_panel_enable(struct lcd_panel *panel){	/* configure PWL pin */	omap_cfg_reg(PWL);	/* Enable PWL unit */	omap_writeb(0x01, OMAP_PWL_CLK_ENABLE);	/* Set PWL level */	omap_writeb(0xFF, OMAP_PWL_ENABLE);	/* set GPIO2 high (lcd power enabled) */	gpio_set_value(2, 1);	return 0;}static void osk_panel_disable(struct lcd_panel *panel){	/* Set PWL level to zero */	omap_writeb(0x00, OMAP_PWL_ENABLE);	/* Disable PWL unit */	omap_writeb(0x00, OMAP_PWL_CLK_ENABLE);	/* set GPIO2 low */	gpio_set_value(2, 0);}static unsigned long osk_panel_get_caps(struct lcd_panel *panel){	return 0;}struct lcd_panel osk_panel = {	.name		= "osk",	.config		= OMAP_LCDC_PANEL_TFT,	.bpp		= 16,	.data_lines	= 16,	.x_res		= 240,	.y_res		= 320,	.pixel_clock	= 12500,	.hsw		= 40,	.hfp		= 40,	.hbp		= 72,	.vsw		= 1,	.vfp		= 1,	.vbp		= 0,	.pcd		= 12,	.init		= osk_panel_init,	.cleanup	= osk_panel_cleanup,	.enable		= osk_panel_enable,	.disable	= osk_panel_disable,	.get_caps	= osk_panel_get_caps,};static int osk_panel_probe(struct platform_device *pdev){	omapfb_register_panel(&osk_panel);	return 0;}static int osk_panel_remove(struct platform_device *pdev){	return 0;}static int osk_panel_suspend(struct platform_device *pdev, pm_message_t mesg){	return 0;}static int osk_panel_resume(struct platform_device *pdev){	return 0;}struct platform_driver osk_panel_driver = {	.probe		= osk_panel_probe,	.remove		= osk_panel_remove,	.suspend	= osk_panel_suspend,	.resume		= osk_panel_resume,	.driver		= {		.name	= "lcd_osk",		.owner	= THIS_MODULE,	},};static int osk_panel_drv_init(void){	return platform_driver_register(&osk_panel_driver);}static void osk_panel_drv_cleanup(void){	platform_driver_unregister(&osk_panel_driver);}module_init(osk_panel_drv_init);module_exit(osk_panel_drv_cleanup);

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -