📄 asiliantfb.c
字号:
/* * drivers/video/asiliantfb.c * frame buffer driver for Asiliant 69000 chip * Copyright (C) 2001-2003 Saito.K & Jeanne * * from driver/video/chipsfb.c and, * * drivers/video/asiliantfb.c -- frame buffer device for * Asiliant 69030 chip (formerly Intel, formerly Chips & Technologies) * Author: apc@agelectronics.co.uk * Copyright (C) 2000 AG Electronics * Note: the data sheets don't seem to be available from Asiliant. * They are available by searching developer.intel.com, but are not otherwise * linked to. * * This driver should be portable with minimal effort to the 69000 display * chip, and to the twin-display mode of the 69030. * Contains code from Thomas Hhenleitner <th@visuelle-maschinen.de> (thanks) * * Derived from the CT65550 driver chipsfb.c: * Copyright (C) 1998 Paul Mackerras * ...which was derived from the Powermac "chips" driver: * Copyright (C) 1997 Fabio Riccardi. * And from the frame buffer device for Open Firmware-initialized devices: * Copyright (C) 1997 Geert Uytterhoeven. * * This file is subject to the terms and conditions of the GNU General Public * License. See the file COPYING in the main directory of this archive for * more details. */#include <linux/module.h>#include <linux/kernel.h>#include <linux/errno.h>#include <linux/string.h>#include <linux/mm.h>#include <linux/slab.h>#include <linux/vmalloc.h>#include <linux/delay.h>#include <linux/interrupt.h>#include <linux/fb.h>#include <linux/init.h>#include <linux/pci.h>#include <asm/io.h>/* Built in clock of the 69030 */static const unsigned Fref = 14318180;#define mmio_base (p->screen_base + 0x400000)#define mm_write_ind(num, val, ap, dp) do { \ writeb((num), mmio_base + (ap)); writeb((val), mmio_base + (dp)); \} while (0)static void mm_write_xr(struct fb_info *p, u8 reg, u8 data){ mm_write_ind(reg, data, 0x7ac, 0x7ad);}#define write_xr(num, val) mm_write_xr(p, num, val)static void mm_write_fr(struct fb_info *p, u8 reg, u8 data){ mm_write_ind(reg, data, 0x7a0, 0x7a1);}#define write_fr(num, val) mm_write_fr(p, num, val)static void mm_write_cr(struct fb_info *p, u8 reg, u8 data){ mm_write_ind(reg, data, 0x7a8, 0x7a9);}#define write_cr(num, val) mm_write_cr(p, num, val)static void mm_write_gr(struct fb_info *p, u8 reg, u8 data){ mm_write_ind(reg, data, 0x79c, 0x79d);}#define write_gr(num, val) mm_write_gr(p, num, val)static void mm_write_sr(struct fb_info *p, u8 reg, u8 data){ mm_write_ind(reg, data, 0x788, 0x789);}#define write_sr(num, val) mm_write_sr(p, num, val)static void mm_write_ar(struct fb_info *p, u8 reg, u8 data){ readb(mmio_base + 0x7b4); mm_write_ind(reg, data, 0x780, 0x780);}#define write_ar(num, val) mm_write_ar(p, num, val)static int asiliantfb_pci_init(struct pci_dev *dp, const struct pci_device_id *);static int asiliantfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info);static int asiliantfb_set_par(struct fb_info *info);static int asiliantfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, u_int transp, struct fb_info *info);static struct fb_ops asiliantfb_ops = { .owner = THIS_MODULE, .fb_check_var = asiliantfb_check_var, .fb_set_par = asiliantfb_set_par, .fb_setcolreg = asiliantfb_setcolreg, .fb_fillrect = cfb_fillrect, .fb_copyarea = cfb_copyarea, .fb_imageblit = cfb_imageblit,};/* Calculate the ratios for the dot clocks without using a single long long * value */static void asiliant_calc_dclk2(u32 *ppixclock, u8 *dclk2_m, u8 *dclk2_n, u8 *dclk2_div){ unsigned pixclock = *ppixclock; unsigned Ftarget = 1000000 * (1000000 / pixclock); unsigned n; unsigned best_error = 0xffffffff; unsigned best_m = 0xffffffff, best_n = 0xffffffff; unsigned ratio; unsigned remainder; unsigned char divisor = 0; /* Calculate the frequency required. This is hard enough. */ ratio = 1000000 / pixclock; remainder = 1000000 % pixclock; Ftarget = 1000000 * ratio + (1000000 * remainder) / pixclock; while (Ftarget < 100000000) { divisor += 0x10; Ftarget <<= 1; } ratio = Ftarget / Fref; remainder = Ftarget % Fref; /* This expresses the constraint that 150kHz <= Fref/n <= 5Mhz, * together with 3 <= n <= 257. */ for (n = 3; n <= 257; n++) { unsigned m = n * ratio + (n * remainder) / Fref; /* 3 <= m <= 257 */ if (m >= 3 && m <= 257) { unsigned new_error = ((Ftarget * n) - (Fref * m)) >= 0 ? ((Ftarget * n) - (Fref * m)) : ((Fref * m) - (Ftarget * n)); if (new_error < best_error) { best_n = n; best_m = m; best_error = new_error; } } /* But if VLD = 4, then 4m <= 1028 */ else if (m <= 1028) { /* remember there are still only 8-bits of precision in m, so * avoid over-optimistic error calculations */ unsigned new_error = ((Ftarget * n) - (Fref * (m & ~3))) >= 0 ? ((Ftarget * n) - (Fref * (m & ~3))) : ((Fref * (m & ~3)) - (Ftarget * n)); if (new_error < best_error) { best_n = n; best_m = m; best_error = new_error; } } } if (best_m > 257) best_m >>= 2; /* divide m by 4, and leave VCO loop divide at 4 */ else divisor |= 4; /* or set VCO loop divide to 1 */ *dclk2_m = best_m - 2; *dclk2_n = best_n - 2; *dclk2_div = divisor; *ppixclock = pixclock; return;}static void asiliant_set_timing(struct fb_info *p){ unsigned hd = p->var.xres / 8; unsigned hs = (p->var.xres + p->var.right_margin) / 8; unsigned he = (p->var.xres + p->var.right_margin + p->var.hsync_len) / 8; unsigned ht = (p->var.left_margin + p->var.xres + p->var.right_margin + p->var.hsync_len) / 8; unsigned vd = p->var.yres; unsigned vs = p->var.yres + p->var.lower_margin; unsigned ve = p->var.yres + p->var.lower_margin + p->var.vsync_len; unsigned vt = p->var.upper_margin + p->var.yres + p->var.lower_margin + p->var.vsync_len; unsigned wd = (p->var.xres_virtual * ((p->var.bits_per_pixel+7)/8)) / 8; if ((p->var.xres == 640) && (p->var.yres == 480) && (p->var.pixclock == 39722)) { write_fr(0x01, 0x02); /* LCD */ } else { write_fr(0x01, 0x01); /* CRT */ } write_cr(0x11, (ve - 1) & 0x0f); write_cr(0x00, (ht - 5) & 0xff); write_cr(0x01, hd - 1); write_cr(0x02, hd); write_cr(0x03, ((ht - 1) & 0x1f) | 0x80); write_cr(0x04, hs); write_cr(0x05, (((ht - 1) & 0x20) <<2) | (he & 0x1f)); write_cr(0x3c, (ht - 1) & 0xc0); write_cr(0x06, (vt - 2) & 0xff); write_cr(0x30, (vt - 2) >> 8); write_cr(0x07, 0x00); write_cr(0x08, 0x00); write_cr(0x09, 0x00); write_cr(0x10, (vs - 1) & 0xff); write_cr(0x32, ((vs - 1) >> 8) & 0xf); write_cr(0x11, ((ve - 1) & 0x0f) | 0x80); write_cr(0x12, (vd - 1) & 0xff); write_cr(0x31, ((vd - 1) & 0xf00) >> 8); write_cr(0x13, wd & 0xff); write_cr(0x41, (wd & 0xf00) >> 8); write_cr(0x15, (vs - 1) & 0xff); write_cr(0x33, ((vs - 1) >> 8) & 0xf); write_cr(0x38, ((ht - 5) & 0x100) >> 8); write_cr(0x16, (vt - 1) & 0xff); write_cr(0x18, 0x00); if (p->var.xres == 640) { writeb(0xc7, mmio_base + 0x784); /* set misc output reg */ } else { writeb(0x07, mmio_base + 0x784); /* set misc output reg */ }}static int asiliantfb_check_var(struct fb_var_screeninfo *var, struct fb_info *p){ unsigned long Ftarget, ratio, remainder; ratio = 1000000 / var->pixclock; remainder = 1000000 % var->pixclock; Ftarget = 1000000 * ratio + (1000000 * remainder) / var->pixclock; /* First check the constraint that the maximum post-VCO divisor is 32, * and the maximum Fvco is 220MHz */ if (Ftarget > 220000000 || Ftarget < 3125000) { printk(KERN_ERR "asiliantfb dotclock must be between 3.125 and 220MHz\n"); return -ENXIO; } var->xres_virtual = var->xres; var->yres_virtual = var->yres; if (var->bits_per_pixel == 24) { var->red.offset = 16; var->green.offset = 8; var->blue.offset = 0; var->red.length = var->blue.length = var->green.length = 8; } else if (var->bits_per_pixel == 16) { switch (var->red.offset) { case 11: var->green.length = 6; break; case 10: var->green.length = 5; break; default: return -EINVAL; } var->green.offset = 5; var->blue.offset = 0; var->red.length = var->blue.length = 5; } else if (var->bits_per_pixel == 8) { var->red.offset = var->green.offset = var->blue.offset = 0; var->red.length = var->green.length = var->blue.length = 8; } return 0;}static int asiliantfb_set_par(struct fb_info *p){ u8 dclk2_m; /* Holds m-2 value for register */ u8 dclk2_n; /* Holds n-2 value for register */ u8 dclk2_div; /* Holds divisor bitmask */ /* Set pixclock */ asiliant_calc_dclk2(&p->var.pixclock, &dclk2_m, &dclk2_n, &dclk2_div); /* Set color depth */ if (p->var.bits_per_pixel == 24) { write_xr(0x81, 0x16); /* 24 bit packed color mode */ write_xr(0x82, 0x00); /* Disable palettes */ write_xr(0x20, 0x20); /* 24 bit blitter mode */ } else if (p->var.bits_per_pixel == 16) { if (p->var.red.offset == 11) write_xr(0x81, 0x15); /* 16 bit color mode */ else write_xr(0x81, 0x14); /* 15 bit color mode */ write_xr(0x82, 0x00); /* Disable palettes */ write_xr(0x20, 0x10); /* 16 bit blitter mode */ } else if (p->var.bits_per_pixel == 8) { write_xr(0x0a, 0x02); /* Linear */ write_xr(0x81, 0x12); /* 8 bit color mode */ write_xr(0x82, 0x00); /* Graphics gamma enable */ write_xr(0x20, 0x00); /* 8 bit blitter mode */ } p->fix.line_length = p->var.xres * (p->var.bits_per_pixel >> 3); p->fix.visual = (p->var.bits_per_pixel == 8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR; write_xr(0xc4, dclk2_m); write_xr(0xc5, dclk2_n); write_xr(0xc7, dclk2_div); /* Set up the CR registers */ asiliant_set_timing(p); return 0;}
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -