a_dc.c

直流电机驱动程序

/* ===================================================================== */
/* File name : DC.C   */
/* Author: JZMING       */
/* Data: 2006.8.20      */
/* Version: 1.0         */
/* Organization: DSP MOTO CONTROL PROGROM 
/*               Zhejiang Tianhuang Techonology Industry Ltd., */
/* Description : C-PROGRAM TO CONTROL A DC USE F2407A        */ 
/* ================================================================== */
/*  头文件  */
#include "TYPEDEFS.H"
#include "F2407_c.H"
#include "CONSTANT.H"
#include "self_define.h"
#include <stdio.h> 
#include <math.h> 

/* ================================================================== */
/* 函数申明  */
void delay (WORD ms);
void led_shine();

/* ================================================================== */
/* 加密区  */
asm("	.word    #0ffffh");
asm("	.word    #0ffffh");
asm("	.word    #0ffffh");
asm("	.word    #0ffffh");

/*=================================================================== */
/* 定义全局变量 */
WORD  nor_flag=0,speed_counter=0;
WORD  current_counter=0;
unsigned char direction_flag=0;
int  adc_comp=0,adc_vdc=0;                   //必须双精度数 
int  n_ref_c=0;
int  adc_ia_ref=0,adc_ib_ref=0;
extern unsigned int sci_buff[2];
extern int n_ref,speed_count,t23;
extern int speed_err,current_given,speed_err_old;
extern int current_err,current_uref,current_err_old;
extern int speed_kp,speed_ki,speed_kd,speed_sum;
extern int current_kp,current_ki,current_kd,current_sum;
extern int speed_pi_error1,speed_pi_error;
extern int current_pi_error,current_pi_error1;
int u=0;
/* =============================================================== */
int  adc_ia_ref=0,adc_ib_ref=0,adc_vdc_ref=0;
int  current_sam_count=0,current_sam_flag=0;
int  adc_comp_a_2=0,adc_comp_b_2=0,adc_vdc_2=0
int  adc_comp_a_1=0,adc_comp_b_1=0,adc_vdc_1=0
int  adc_temp=0;

/* =============================================================== */
/* =============================================================== */
/* 中断屏蔽子程序 */         
void inline disable()
{
   asm("	setc INTM");
}

/* =============================================================== */
/* 中断使能子程序 */
void inline enable()
{
   asm("	clrc INTM");
}


/* =============================================================== */
/* 主函数 */

main()
{
   KICK_DOG;
   *ACTRA   = 0x0fff;
   disable();                                   //中断屏蔽
   sytem_init();                                //系统时钟建立
   spi_init();                                  //SPI初始化
   io_init();                                   //I/O口初始化
   ev_init();                                   //事件管理器初始化
 //  sci_init();                                  //串口初始化
   adc_init();
   
   current_counter = CUR_COUNTER_CON;           //电流PI循环次数
   speed_counter = SPEED_COUNTER_CON;           //速度PI循环次数
   
   *T1CON = *T1CON | 0x0042;   					//开启定时器1 
   enable();                                    //中断使能
   
   *ADCTRL2 = 0x2000;                           //软件启动ADC
   n_ref=0;
   speed_count=15000;         //Q8  1500=6000,58.59375
   speed_kp=100;              //500-20
   speed_ki=40;               //100-10
   speed_sum=0;
   current_kp=10;             //50-2
   current_ki=5;              //10-1   
   speed_kd=2;
   current_kd=2;               
   current_sum=0;  
   speed_pi_error1=0;
   speed_pi_error=0;
   current_pi_error=0;
   current_pi_error1=0;
   speed_err_old=0;
   current_err_old=0;
   
   Double_ram_ini();          //初始化，往设定参数页地址置初值   
   while(1)
   { 
      KICK_DOG; 
      var_query_dram();
         var_set_dram();
   }
}

/* ================================================================= */
/* 电流采样子程序 */
void cur_sample(void)
{
   if(current_sam_flag==1)
     { 
      adc_comp_a_1 = *RESULT0 >> 6;   					//是周期中断,电流采样   					
      adc_comp_a_1 = adc_comp_a_1-adc_ia_ref; 
   
      adc_comp_b_1 = *RESULT1 >> 6;   					//是周期中断,电流采样   					
      adc_comp_b_1 = adc_comp_b_1-adc_ib_ref; 

      adc_vdc_1 = *RESULT2 >> 6;   					//是周期中断,电流采样   					
      adc_vdc_1 = adc_vdc_1-adc_vdc_ref; 
      
      *ADCTRL2 = 0x4000;                           //ADC指针复位
      *ADCTRL2 = 0x2000;  
      }
      adc_vdc=(adc_vdc_1+adc_vdc_2)>1;
      
      if(current_uref>0)
           adc_comp=adc_comp_a_1;
      else
           adc_comp=adc_comp_a_2;
           
}

/* ==================================================================*/
/* 定时器1周期中断子程序 */
void interrupt t1_perint()        				   //定时器1周期中断----测试用
{
   int flag;
   flag = *EVAIFRA & 0x0280;
   if (flag == 0x0200)            				   //如果不是周期中断，退出
   {
     if(current_sam_flag==1)
     { 
      adc_comp_a_2 = *RESULT0 >> 6;   					//是周期中断,电流采样   					
      adc_comp_a_2 = adc_comp_a_2-adc_ia_ref; 
   
      adc_comp_b_2 = *RESULT1 >> 6;   					//是周期中断,电流采样   					
      adc_comp_b_2 = adc_comp_b_2-adc_ib_ref; 

      adc_vdc_2 = *RESULT2 >> 6;   					//是周期中断,电流采样   					
      adc_vdc_2 = adc_vdc_2-adc_vdc_ref; 
      
      *ADCTRL2 = 0x4000;                           //ADC指针复位
      *ADCTRL2 = 0x2000;  
      }
      else
      {    
       current_sam_count++;
       if(current_sam_count>2000)
       {
         if(current_sam_count>2008)
           {
            adc_ia_ref=adc_ia_ref>>3;
            adc_ib_ref=adc_ib_ref>>3;
            adc_vdc_ref=adc_vdc_ref>>3;
            current_sam_count=0;
            current_sam_flag=1;
           }
          else
           {
            adc_temp = *RESULT0 >> 6;   					//是周期中断,电流采样   					
            adc_ia_ref = adc_ia_ref+adc_temp; 
   
            adc_temp = *RESULT1 >> 6;   					//是周期中断,电流采样   					
            adc_ib_ref = adc_ib_ref+adc_temp; 
      
            adc_temp = *RESULT2 >> 6;   					//是周期中断,电流采样   					
            adc_vdc_ref = adc_vdc_ref+adc_temp; 
      
            *ADCTRL2 = 0x4000;                           //ADC指针复位
            *ADCTRL2 = 0x2000;  
            }  
         }
      }
     *EVAIFRA = 0X0200;  
   }   

   else
   {
    cur_sample();   
    
/*   u++;
   if(u>100)
   {
   *SCITXBUF=((int)n_feed);
   u=0;
   }*/
   if (n_ref >=0) direction_flag=0;      //正转标志
   else if (n_ref <0) direction_flag=1;  //反转标志   

/*   
   temp_value=(sci_buff[0]*256)+sci_buff[1];       //串口发送的值
   n_ref_c = temp_value;                           //速度给定值
   n_ref=n_ref_c;
*/

// -------------- 速度计算PID调节部分开始  -------------------------

   speed_counter--; 
   if (speed_counter ==0)
   {
      t23=*T4CNT;
      speed_counter = SPEED_COUNTER_CON;          //赋初值
      speed_pi_on();  
      
      
//      *CMPR1 = 500-current_given;           //更新占空比
//      *CMPR2 = 500-current_given;
   }

//----------------- 速度计算PID调节部分结束   -----------------------   
/*--------------- 电流采样PID调节部分开始   ------------------------ */ 

//      current_counter = CUR_COUNTER_CON;           //赋初值
                                   //电流采样计算
      
      current_err=current_given-adc_comp;
    
      current_cal_pi();
      
      if (direction_flag == 0)            //正转
      {
         if(current_uref > 500) current_uref = 500;
         if (current_uref < 0) current_uref = 0;
      }
      else if (direction_flag ==1)        //反转
      {
         if (current_uref > 0) current_uref = 0;
         if (current_uref <- 500) current_uref = -500;   
      }
      
      *CMPR1 = 500-current_uref;           //更新占空比
      *CMPR2 = 500-current_uref;

//--------------- 电流采样PID调节部分结束  ------------------------- 

  
                           //数据保存至双口RAM中    
//   led_shine();                                 //闪灯子程序，作测试用!!!

   *EVAIFRA = 0X0080;   				//清中断标志，以进行下次中断
   }
   asm( " clrc INTM");
   return; 
}

/* =================================================================== */
/* 空中断子程序 */

void interrupt nothing()
{
   enable();
   return;
}

/* ==================================================================== */
/* 闪灯子程序，测试用!!!! */
void led_shine()
{
   nor_flag = ~nor_flag;     
   if (nor_flag)
   {
      asm( " clrc xf");
      delay(100);
   }
   else 
   {
      asm( " setc xf");
      delay(100);
   } 
}

/* ==================================================================== */
/* 延时子程序，测试用!!!!! */
void delay (unsigned int ms)
{  
   WORD i,j,k;
   KICK_DOG;
   for (i=0;i<=ms;i++)
   {
      for(j=0;j<200;j++)
      {
         k++;
      }
   }
}