download.c

EP9315的wince下载程序。download.exe

//****************************************************************************
//
// DOWNLOAD.C - Automates the download of code into the NOR FLASH
//              on the EP93xx boards.
//
// Copyright (c) 2005 Cirrus Logic, Inc.
//
//****************************************************************************
#include <stdio.h>
#include <string.h>
//****************************************************************************
//
// The arm code which executed at 0x80014000-0x80014800.
// The memory region belong to the internal ethernet buffer.
//
//****************************************************************************
#include "boot/boot.h"
//****************************************************************************
//
// The arm code which executed at 0x00000000-0x00010000.
// The memory region belong to the SDRAM.
//
//****************************************************************************
#include "src/init.h"

#ifdef __CYGWIN__
#define _WIN32
#endif
#ifdef _WIN32
#include <windows.h>
#include "getopt.h"
#endif
#ifdef __linux__
#include <sys/ioctl.h>
#include <sys/timeb.h>
#include <errno.h>
#include <fcntl.h>
#include <termios.h>
#include <unistd.h>
#endif

//****************************************************************************
//
// lSerialPort is the serial port which is being used.
//
//****************************************************************************
#ifdef _WIN32
HANDLE hSerialPort;
#endif
#ifdef __linux__
long lSerialPort;
#endif

//****************************************************************************
//
// OpenPort opens the specified serial port.
//
//****************************************************************************
int
OpenPort(long lPort,int bUSBPort)
{
#ifdef _WIN32
    char pcName[16];

    //
    // Create the device name for the given serial port.
    //
    sprintf(pcName, "COM%d", lPort);

    //
    // Open the serial port.
    //
    hSerialPort = CreateFile(pcName, GENERIC_READ | GENERIC_WRITE, 0, 0,
                             OPEN_EXISTING, 0, 0);
    if(hSerialPort == INVALID_HANDLE_VALUE)
    {
        fprintf(stderr, "Could not open serial port %s.\n", pcName);
        return(0);
    }

    //
    // Success.
    //
    return(1);
#elif defined(__linux__)
    char pcName[16], pcLock[32], pcBuffer[64];
    long lLock, lCount, lPid;
    struct termios buf;

    //
    // Create the file name for the lock file.
    //
    //sprintf(pcLock, "/var/lock/LCK..ttyS%d", lPort - 1);
    if(bUSBPort==0)
    {
    	sprintf(pcLock, "/var/lock/LCK..ttyS%d", lPort - 1);
    }
    else if(bUSBPort==1)
    {
    	sprintf(pcLock, "/var/lock/LCK..ttyUSB%d", lPort);	
    }
    
    //
    // Attempt to open the lock file.
    //
    lLock = open(pcLock, O_RDONLY);
    if(lLock)
    {
        //
        // The lock file exists, so read from it and then close it.
        //
        lCount = read(lLock, pcBuffer, 63);
        close(lLock);

        //
        // See if any data was read from the lock file.
        //
        if(lCount > 0)
        {
            //
            // The PID is currently unknown, so set it to -1.
            //
            lPid = -1;

            //
            // See if the lock file contained only four bytes, indicating a
            // Kermit-style lock file.
            //
            if(lCount == 4)
            {
                //
                // Extract the PID from the lock file data.
                //
                lPid = *(long *)pcBuffer;
            }

            //
            // Otherwise, the lock file is in ASCII.
            //
            else
            {
                //
                // Make sure that the string is NULL terminated.
                //
                pcBuffer[lCount] = 0;

                //
                // Convert the PID from ASCII to an integer.
                //
                sscanf(pcBuffer, "%d", &lPid);
            }

            //
            // If a PID was found, see if the process still exists.
            //
            if((lPid > 0) && (kill((pid_t)lPid, 0) < 0) && (errno == ESRCH))
            {
                //
                // The process no longer exists, meaning that the lock is
                // stale.  Delete the lock file.
                //
                unlink(pcLock);
            }
            else
            {
                //
                // The process still exists, so the port is locked.
                //
                lCount = 0;
            }
        }

        //
        // See if the port is locked.
        //
        if(lCount == 0)
        {
            //
            // Indicate that the port is locked.
            //
            if(bUSBPort==0)
    	    {
    		fprintf(stderr, "Serial port /dev/ttyS%d is locked!\n", lPort - 1);
    	    }
    	    else if(bUSBPort==1)
    	    {
    		fprintf(stderr, "Serial port /dev/ttyUSB%d is locked!\n", lPort);	
    	    }
            //fprintf(stderr, "Serial port /dev/ttyS%d is locked!\n", lPort - 1);
            return(0);
        }
    }

    //
    // Create the lock file.
    //
    lLock = creat(pcLock, 0666);
    if(lLock >= 0)
    {
        //
        // Print our PID to the lock file.
        //
        sprintf(pcBuffer, "%ld\n", (long)getpid());
        write(lLock, pcBuffer, strlen(pcBuffer));
        close(lLock);
    }

    //
    // Create the device name for the given serial port.
    //
    //sprintf(pcName, "/dev/ttyS%d", lPort - 1);
    if(bUSBPort==0)
    {
    	sprintf(pcName, "/dev/ttyS%d", lPort - 1);
    }
    else if(bUSBPort==1)
    {
    	sprintf(pcName, "/dev/ttyUSB%d", lPort);	
    }
    
    //
    // Open the serial port.
    //
    lSerialPort = open(pcName, O_RDWR | O_NONBLOCK);
    if(lSerialPort < 0)
    {
        unlink(pcLock);
        //fprintf(stderr, "Could not open serial port %s.\n", pcName);
        if(bUSBPort==0)
        {
    	    fprintf(stderr, "Could not open normal serial port %s.\n", pcName);
        }
        else if(bUSBPort==1)
        {
    	    fprintf(stderr, "Could not open USB serial port %s.\n", pcName);	
        }
                
        return(0);
    }

    //
    // Get the attributes of the serial port.  This will fail if the serial
    // port does not exist (even though the open will succeed if the serial
    // port does not exist).
    //
    if(tcgetattr(lSerialPort, &buf))
    {
        unlink(pcLock);
        fprintf(stderr, "Could not open serial port %s.\n", pcName);
        return(0);
    }

    //
    // Success.
    //
    return(1);
#else
    //
    // There is no serial port support for the target environment, so return
    // an error.
    //
    fprintf(stderr, "No serial port support!\n");
    return(0);
#endif
}

//****************************************************************************
//
// ClosePort closes the currently opened serial port.
//
//****************************************************************************
void
ClosePort(long lPort,int bUSBPort)
{
#ifdef _WIN32
    //
    // Close the serial port.
    //
    CloseHandle(hSerialPort);
#endif
#ifdef __linux__
    char pcLock[32];

    //
    // Close the serial port.
    //
    close(lSerialPort);

    //
    // Create the file name for the lock file.
    //
    if(bUSBPort==0)
    {
    	sprintf(pcLock, "/var/lock/LCK..ttyS%d", lPort - 1);
    }
    else if(bUSBPort==1)
    {
    	sprintf(pcLock, "/var/lock/LCK..ttyUSB%d", lPort);
    }
    //
    // Delete the lock file.
    //
    unlink(pcLock);
#endif
}

//****************************************************************************
//
// SetBaud sets the baud rate and data format of the serial port.
//
//****************************************************************************
void
SetBaud(long lRate)
{
#ifdef _WIN32
    DCB dcb;

    //
    // Purge any pending characters in the serial port.
    //
    PurgeComm(hSerialPort, (PURGE_TXABORT | PURGE_RXABORT |
                            PURGE_TXCLEAR | PURGE_RXCLEAR));

    //
    // Fill in the device control block.
    //
    dcb.DCBlength = sizeof(DCB);
    dcb.BaudRate = lRate;
    dcb.fBinary = TRUE;
    dcb.fParity = FALSE;
    dcb.fOutxCtsFlow = FALSE;
    dcb.fOutxDsrFlow = FALSE;
    dcb.fDtrControl = DTR_CONTROL_DISABLE;
    dcb.fDsrSensitivity = FALSE;
    dcb.fTXContinueOnXoff = TRUE;
    dcb.fOutX = FALSE;
    dcb.fInX = FALSE;
    dcb.fErrorChar = FALSE;
    dcb.fNull = FALSE;
    dcb.fRtsControl = RTS_CONTROL_DISABLE;
    dcb.fAbortOnError = FALSE;
    dcb.XonLim = 0;
    dcb.XoffLim = 0;
    dcb.ByteSize = 8;
    dcb.Parity = NOPARITY;
    dcb.StopBits = ONESTOPBIT;
    dcb.XonChar = 17;
    dcb.XoffChar = 19;
    dcb.ErrorChar = 0;
    dcb.EofChar = 0;
    dcb.EvtChar = 0;
    dcb.wReserved = 0;

    //
    // Set the new serial port configuration.
    //
    SetCommState(hSerialPort, &dcb);
#endif
#ifdef __linux__
    struct termios buf;
    int rate;

    //
    // Get the current settings for the serial port.
    //
    if(tcgetattr(lSerialPort, &buf))
    {
        return;
    }

    //
    // Reset to the serial port to raw mode.
    //
    buf.c_iflag &= ~(IGNBRK | BRKINT | PARMRK | ISTRIP |
                     INLCR | IGNCR | ICRNL | IXON);
    buf.c_oflag &= ~OPOST;
    buf.c_lflag &= ~(ECHO | ECHONL | ICANON | ISIG | IEXTEN);
    buf.c_cflag &= ~(CSIZE | PARENB);
    buf.c_cflag |= CS8;

    //
    // Get the baud rate.
    //
    switch(lRate)
    {
        case 9600:
        {
            rate = B9600;
            break;
        }

        case 19200:
        {
            rate = B19200;
            break;
        }

        case 38400:
        {
            rate = B38400;
            break;
        }

        case 57600:
        {
            rate = B57600;
            break;
        }

        case 115200:
        {
            rate = B115200;
            break;
        }
    }

    //
    // Set the input and output baud rate of the serial port.
    //
    cfsetispeed(&buf, rate);
    cfsetospeed(&buf, rate);

    //
    // Set data bits to 8.
    //
    buf.c_cflag &= ~CSIZE;
    buf.c_cflag |= CS8;

    //
    // Set stop bits to one.
    //
    buf.c_cflag &= ~CSTOPB;

    //
    // Disable parity.
    //
    buf.c_cflag &= ~(PARENB | PARODD);

    //
    // Set the new settings for the serial port.
    //
    if(tcsetattr(lSerialPort, TCSADRAIN, &buf))
    {
	return;
    }

    //
    // Wait until the output buffer is empty.
    //
    tcdrain(lSerialPort);
#endif
}

//****************************************************************************
//
// SendChar sends a character to the serial port.
//
//****************************************************************************
void
SendChar(char cChar)
{
#ifdef _WIN32
    DWORD dwLen;

    //
    // Send this character to the serial port.
    //
    WriteFile(hSerialPort, &cChar, 1, &dwLen, NULL);
#endif
#ifdef __linux__
    //
    // Send this character to the serial port.
    //
    write(lSerialPort, &cChar, 1);
#endif
}

//****************************************************************************
//
// ReceiveChar reads a character from the serial port.
//
//****************************************************************************
char
ReceiveChar(long lTimeout)
{