inpdomod.c

spice中支持多层次元件模型仿真的可单独运行的插件源码

/**********
Copyright 1990 Regents of the University of California.  All rights reserved.
Author: 1985 Thomas L. Quarles
**********/

#include "spice.h"
#include <stdio.h>
#include "iferrmsg.h"
#include "util.h"
#include "inpdefs.h"
#include "strext.h"
#include "suffix.h"

/*ARGSUSED*/
char *
INPdomodel(ckt,image,tab)
    GENERIC *ckt;
    card *image;
    INPtables *tab;
{

    char *modname;
    int type;
    int lev;
    char *typename;
    char *err = (char *)NULL;
    char *line;

    line = image->line;
    INPgetTok(&line,&modname,1);  /* throw away '.model' */
    INPgetTok(&line,&modname,1);
    INPinsert(&modname,tab);
    INPgetTok(&line,&typename,1);
    if( (strcmp(typename,"npn") == 0)||(strcmp(typename,"pnp")==0) ) {
        type = INPtypelook("BJT");
        if(type < 0) {
            err = INPmkTemp("Device type BJT not available in this binary\n");
        }
        INPmakeMod(modname,type,image);
    } else if(strcmp(typename,"d") == 0) {
        type = INPtypelook("Diode");
        if(type < 0) {
            err = INPmkTemp("Device type Diode not available in this binary\n");
        }
        INPmakeMod(modname,type,image);
    } else if( (strcmp(typename,"njf") == 0) || (strcmp(typename,"pjf") == 0)){
        type = INPtypelook("JFET");
        if(type < 0) {
            err = INPmkTemp("Device type JFET not available in this binary\n");
        }
        INPmakeMod(modname,type,image);
    } else if( (strcmp(typename,"nmf") == 0) || (strcmp(typename,"pmf")==0) ) {
        type = INPtypelook("MES");
        if(type < 0) {
            err = INPmkTemp("Device type MES not available in this binary\n");
        }
        INPmakeMod(modname,type,image);
    } else if(strcmp(typename,"urc") == 0) {
        type = INPtypelook("URC");
        if(type < 0) {
            err = INPmkTemp("Device type URC not available in this binary\n");
        }
        INPmakeMod(modname,type,image);
    } else if( (strcmp(typename,"nmos")==0) || (strcmp(typename,"pmos")==0) ) {
        err = INPfindLev(line,&lev);
        switch(lev) {
            case 0:
            case 1:
                type = INPtypelook("Mos1");
                if(type < 0) {
                    err = INPmkTemp(
                            "Device type MOS1 not available in this binary\n");
                }
                break;
            case 2:
                type = INPtypelook("Mos2");
                if(type < 0) {
                    err = INPmkTemp(
                            "Device type MOS2 not available in this binary\n");
                }
                break;
            case 3:
                type = INPtypelook("Mos3");
                if(type < 0) {
                    err = INPmkTemp(
                            "Device type MOS3 not available in this binary\n");
                }
                break;
            case 4:
                type = INPtypelook("BSIM1");
                if(type < 0) {
                    err = INPmkTemp(
                            "Device type BSIM1 not available in this binary\n");
                }
                break;
            case 5:
                type = INPtypelook("BSIM2");
                if(type < 0) {
                    err = INPmkTemp(
                            "Device type BSIM2 not available in this binary\n");
                }
                break;
            case 6:
                type = INPtypelook("Mos6");
                if(type < 0) {
                    err = INPmkTemp(
                            "Device type MOS6 not available in this binary\n");
                }
                break;
            case 7:
                type = INPtypelook("BSIM3");
                if(type < 0) {
                    err = INPmkTemp(
                            "Device type BSIM3 not available in this binary\n");
                }
                break;
            default: /* placeholder; use level 8 for the next model */
		err = INPmkTemp(
		  "Only MOS device levels 1-7 are supported in this binary\n");
                break;
        }
        INPmakeMod(modname,type,image);
    } else if(strcmp(typename,"r") == 0) {
        type = INPtypelook("Resistor");
        if(type < 0) {
            err = INPmkTemp(
                    "Device type Resistor not available in this binary\n");
        }
        INPmakeMod(modname,type,image);
    } else if(strcmp(typename,"c") == 0) {
        type = INPtypelook("Capacitor");
        if(type < 0) {
            err = INPmkTemp(
                    "Device type Capacitor not available in this binary\n");
        }
        INPmakeMod(modname,type,image);
    } else if(strcmp(typename,"sw") == 0) {
        type = INPtypelook("Switch");
        if(type < 0) {
            err = INPmkTemp(
                    "Device type Switch not available in this binary\n");
        }
        INPmakeMod(modname,type,image);
    } else if(strcmp(typename,"csw") == 0) {
        type = INPtypelook("CSwitch");
        if(type < 0) {
            err = INPmkTemp(
                    "Device type CSwitch not available in this binary\n");
        }
        INPmakeMod(modname,type,image);
    } else if(strcmp(typename,"ltra") == 0) {
        type = INPtypelook("LTRA");
        if(type < 0) {
            err = INPmkTemp(
                    "Device type LTRA not available in this binary\n");
        }
        INPmakeMod(modname,type,image);
    } else if(strcmp(typename,"numd") == 0) {
        err = INPfindLev(line,&lev);
        switch(lev) {
            case 1:
            default:
                type = INPtypelook("NUMD");
                if(type < 0) {
                    err = INPmkTemp(
                            "Device type NUMD not available in this binary\n");
                }
                break;
            case 2:
                type = INPtypelook("NUMD2");
                if(type < 0) {
                    err = INPmkTemp(
                            "Device type NUMD2 not available in this binary\n");
                }
                break;
	}
        INPmakeMod(modname,type,image);
    } else if(strcmp(typename,"nbjt") == 0) {
        err = INPfindLev(line,&lev);
        switch(lev) {
            case 1:
            default:
                type = INPtypelook("NBJT");
                if(type < 0) {
                    err = INPmkTemp(
                            "Device type NBJT not available in this binary\n");
                }
                break;
            case 2:
                type = INPtypelook("NBJT2");
                if(type < 0) {
                    err = INPmkTemp(
                            "Device type NBJT2 not available in this binary\n");
                }
                break;
	}
        INPmakeMod(modname,type,image);
    } else if(strcmp(typename,"numos") == 0) {
        type = INPtypelook("NUMOS");
        if(type < 0) {
            err = INPmkTemp(
			"Device type NUMOS not available in this binary\n");
        }
        INPmakeMod(modname,type,image);
    } else {
        type = -1;
        err = (char *)MALLOC(35 + strlen(typename));
        (void)sprintf(err,"unknown model type %s - ignored\n",typename);
    }
    return(err);
}