devprint.c

spice中支持多层次元件模型仿真的可单独运行的插件源码

/**********
Copyright 1992 Regents of the University of California.  All rights reserved.
Author:	1992 David A. Gates, U. C. Berkeley CAD Group
**********/

/* Device-type Dependent Printing Routines */

#include <stdio.h>
#include "optndefs.h"

void
printVoltages( file, mName, iName, devType, numVolt,
    v1, delV1, v2, delV2, v3, delV3 )
FILE *file;				/* output filestream */
char *mName;				/* name of model */
char *iName;				/* name of instance */
int devType;
int numVolt;
double v1, delV1, v2, delV2, v3, delV3;
{
  fprintf( file, "\n" );
  switch ( devType ) {
    case OPTN_RESISTOR:
      fprintf( file, "RES %s:%s voltage:\n", mName, iName );
      fprintf( file, "    Vpn =% .4e delVpn =% .4e\n", v1, delV1 );
      break;
    case OPTN_CAPACITOR:
      fprintf( file, "CAP %s:%s voltage:\n", mName, iName );
      fprintf( file, "    Vpn =% .4e delVpn =% .4e\n", v1, delV1 );
      break;
    case OPTN_DIODE:
      fprintf( file, "DIO %s:%s voltage:\n", mName, iName );
      fprintf( file, "    Vpn =% .4e delVpn =% .4e\n", v1, delV1 );
      break;
    case OPTN_MOSCAP:
      fprintf( file, "MOS %s:%s voltage:\n", mName, iName );
      fprintf( file, "    Vgb =% .4e delVgb =% .4e\n", v1, delV1 );
      break;
    case OPTN_BIPOLAR:
      fprintf( file, "BJT %s:%s voltages:\n", mName, iName );
      if ( numVolt == 3 ) {
	fprintf( file, "    Vce =% .4e delVce =% .4e\n",
	    v1 - v3, delV1 - delV3 );
	fprintf( file, "    Vbe =% .4e delVbe =% .4e\n",
	    v2 - v3, delV2 - delV3 );
	fprintf( file, "    Vcs =% .4e delVcs =% .4e\n", v1, delV1 );
      } else {
	fprintf( file, "    Vce =% .4e delVce =% .4e\n", v1, delV1 );
	fprintf( file, "    Vbe =% .4e delVbe =% .4e\n", v2, delV2 );
      }
      break;
    case OPTN_MOSFET:
      fprintf( file, "MOS %s:%s voltages:\n", mName, iName );
      fprintf( file, "    Vdb =% .4e delVdb =% .4e\n", v1, delV1 );
      fprintf( file, "    Vgb =% .4e delVgb =% .4e\n", v2, delV2 );
      fprintf( file, "    Vsb =% .4e delVsb =% .4e\n", v3, delV3 );
      break;
    case OPTN_JFET:
      if ( numVolt == 3 ) {
	fprintf( file, "JFET %s:%s voltages:\n", mName, iName );
	fprintf( file, "    Vdb =% .4e delVdb =% .4e\n", v1, delV1 );
	fprintf( file, "    Vgb =% .4e delVgb =% .4e\n", v2, delV2 );
	fprintf( file, "    Vsb =% .4e delVsb =% .4e\n", v3, delV3 );
      } else {
	fprintf( file, "JFET %s:%s voltages:\n", mName, iName );
	fprintf( file, "    Vds =% .4e delVds =% .4e\n", v1, delV1 );
	fprintf( file, "    Vgs =% .4e delVgs =% .4e\n", v2, delV2 );
      }
      break;
    case OPTN_SOIBJT:
    case OPTN_SOIMOS:
    case OPTN_MESFET:
    default:
      break;
  }
}