uart1.c

ADuC系列芯片的源代码事例

/*********************************************************************

 Author        : ADI - Apps            www.analog.com/MicroConverter

 Date          : Sept. 2005

 File          : UART1.c

 Hardware      : Applicable to ADuC702x rev H or I silicon
                 Currently targetting ADuC7026.

 Description   : This code demonstrates basic UART functionality.
				 The baudrate is calculated with the following formula:
 
					DL = HCLK										   
						_______										   
						Baudrate * 2 *16							   
                                          																   
***********************************************************************/

#include <ADuC7026.h>
 	
extern int write (int file, char * ptr, int len);	// Functions used to 
extern int getchar (void);							// to output data 	 
extern int putchar(int);                     		// Write character to Serial Port  


int main (void)  {
  unsigned char jchar = 0x30;

	char output1[13] = "Hello World\n";
	
	// Setup tx & rx pins on P1.0 and P1.1
	GP1CON = 0x011;

   	// Start setting up UART at 9600bps
   	COMCON0 = 0x080;				// Setting DLAB
   	COMDIV0 = 0x088;				// Setting DIV0 and DIV1 to DL calculated
   	COMDIV1 = 0x000;
   	COMCON0 = 0x007;				// Clearing DLAB

	GP4DAT = 0x04000000;			// P4.2 configured as an output. LED is turned on

	while(1)
	{

		GP4DAT ^= 0x00040000;		// Complement P4.2
		write(0,output1,13);		// Output Data
		jchar = getchar();			// RX Data, Single Byte
		write(0,&jchar,1);			// Output Rxed Data
	}
}