makefile

s3c2410x板 vxworks开发bsp包

# Makefile - make rules for target/config/s3c2410x
#
# DESCRIPTION
# This file contains rules for building VxWorks for the OMU
# with an s3c2410x microprocessor module.
#
# INCLUDES
#     makeTarget
#*/

CPU		= ARMARCH4
TOOL		= gnu
EXTRA_DEFINE	= -Wcomment -DCPU_920T \
		  -DARMMMU=ARMMMU_920T -DARMCACHE=ARMCACHE_920T

TGT_DIR = $(WIND_BASE)/target

include $(TGT_DIR)/h/make/defs.bsp
#include $(TGT_DIR)/h/make/make.$(CPU)$(TOOL)
#include $(TGT_DIR)/h/make/defs.$(WIND_HOST_TYPE)

## Only redefine make definitions below this point, or your definitions will
## be overwritten by the makefile stubs above.

TARGET_DIR	= s3c2410x
VENDOR		= HITSAT
BOARD		= OMU

RELEASE		+= bootrom.bin

#
# The constants ROM_TEXT_ADRS, ROM_SIZE, and RAM_HIGH_ADRS are defined
# in config.h and Makefile.
# All definitions for these constants must be identical.
#

ROM_TEXT_ADRS	= 00000000 # ROM entry address
ROM_WARM_ADRS	= 00000004 # ROM warm address
ROM_SIZE	= 00200000 # number of bytes of ROM space

RAM_LOW_ADRS	= 30001000 # RAM text/data address
RAM_HIGH_ADRS	= 33e00000 # RAM text/data address

VMA_START	= 0x$(ROM_TEXT_ADRS)

# Binary version of VxWorks ROM images, suitable for programming
# into Flash using tools provided by ARM.  If other ROM images need to
# be put into Flash, add similar rules here.

bootrom.bin: bootrom
	- @ $(RM) $@
	$(EXTRACT_BIN) -O binary bootrom $@

bootrom_res.bin: bootrom_res
	- @ $(RM) $@
	$(EXTRACT_BIN) -O binary bootrom_res $@

bootrom_uncmp.bin: bootrom_uncmp
	- @ $(RM) $@
	$(EXTRACT_BIN) -O binary bootrom_uncmp $@

vxWorks_rom.bin: vxWorks_rom
	- @ $(RM) $@
	$(EXTRACT_BIN) -O binary vxWorks_rom $@

vxWorks.st_rom.bin: vxWorks.st_rom
	- @ $(RM) $@
	$(EXTRACT_BIN) -O binary vxWorks.st_rom $@

vxWorks.res_rom.bin: vxWorks.res_rom
	- @ $(RM) $@
	$(EXTRACT_BIN) -O binary vxWorks.res_rom $@

vxWorks.res_rom_nosym.bin: vxWorks.res_rom_nosym
	- @ $(RM) $@
	$(EXTRACT_BIN) -O binary vxWorks.res_rom_nosym $@

## Only redefine make definitions above this point, or the expansion of
## makefile target dependencies may be incorrect.

include $(TGT_DIR)/h/make/rules.bsp
#include $(TGT_DIR)/h/make/rules.$(WIND_HOST_TYPE)