defbf561.h

u-boot1.3.0的原码,从配了网络驱动和FLASH的驱动,并该用ESC竟如

 * v = 0 to 7
 * w = 0 or 1

 * Per_number = 0 to 63
 * IVG_number = 7 to 15
 * Peripheral #Per_number assigned IVG #IVG_number
 * Usage:
 *      r0.l = lo(Peripheral_IVG(62, 10));
 *      r0.h = hi(Peripheral_IVG(62, 10));
 */
#define Peripheral_IVG(Per_number, IVG_number)    \
				( (IVG_number) -7) << ( ((Per_number)%8) *4)

/* SICx_IMASKw Masks */
/* masks are 32 bit wide, so two writes reguired for "64 bit" wide registers */
#define SIC_UNMASK_ALL		0x00000000	/* Unmask all peripheral interrupts */
#define SIC_MASK_ALL		0xFFFFFFFF	/* Mask all peripheral interrupts */
#define SIC_MASK(x)		(1 << (x))	/* Mask Peripheral #x interrupt */
#define SIC_UNMASK(x)		(0xFFFFFFFF ^ (1 << (x)))/* Unmask Peripheral #x interrupt */

/* SIC_IWR Masks */
#define IWR_DISABLE_ALL		0x00000000	/* Wakeup Disable all peripherals */
#define IWR_ENABLE_ALL		0xFFFFFFFF	/* Wakeup Enable all peripherals */
/* x = pos 0 to 31, for 32-63 use value-32 */
#define IWR_ENABLE(x)		(1 << (x))	/* Wakeup Enable Peripheral #x */
/* Wakeup Disable Peripheral #x */
#define IWR_DISABLE(x)		(0xFFFFFFFF ^ (1 << (x)))

/*
 * WATCHDOG TIMER MASKS
 */

/* Watchdog Timer WDOG_CTL Register */
#define	WDOGA_CTL		0xFFC00200
#define	WDOGA_CNT		0xFFC00204
#define	WDOGA_STAT		0xFFC00208
#define	WDOGB_CTL		0xFFC01200
#define	WDOGB_CNT		0xFFC01204
#define	WDOGB_STAT		0xFFC01208
#define ICTL(x)			((x<<1) & 0x0006)
#define ENABLE_RESET		0x00000000	/* Set Watchdog Timer to generate reset */
#define ENABLE_NMI		0x00000002	/* Set Watchdog Timer to generate non-maskable interrupt */
#define ENABLE_GPI		0x00000004	/* Set Watchdog Timer to generate general-purpose interrupt */
#define DISABLE_EVT		0x00000006	/* Disable Watchdog Timer interrupts */

#define TMR_EN			0x0000
#define TMR_DIS			0x0AD0
#define TRO			0x8000

#define ICTL_P0			0x01
#define ICTL_P1			0x02
#define TRO_P			0x0F

/*
 * UART CONTROLLER MASKS
 */

/* UART_LCR Register */

#define DLAB			0x80
#define SB			0x40
#define STP			0x20
#define EPS			0x10
#define PEN			0x08
#define STB			0x04
#define WLS(x)			((x-5) & 0x03)

#define DLAB_P			0x07
#define SB_P			0x06
#define STP_P			0x05
#define EPS_P			0x04
#define PEN_P			0x03
#define STB_P			0x02
#define WLS_P1			0x01
#define WLS_P0			0x00

/* UART_MCR Register */
#define LOOP_ENA		0x10
#define LOOP_ENA_P		0x04

/* UART_LSR Register */
#define TEMT			0x40
#define THRE			0x20
#define BI			0x10
#define FE			0x08
#define PE			0x04
#define OE			0x02
#define DR			0x01

#define TEMP_P			0x06
#define THRE_P			0x05
#define BI_P			0x04
#define FE_P			0x03
#define PE_P			0x02
#define OE_P			0x01
#define DR_P			0x00

/* UART_IER Register */
#define ELSI			0x04
#define ETBEI			0x02
#define ERBFI			0x01

#define ELSI_P			0x02
#define ETBEI_P			0x01
#define ERBFI_P			0x00

/* UART_IIR Register */
#define STATUS(x)		((x << 1) & 0x06)
#define NINT			0x01
#define STATUS_P1		0x02
#define STATUS_P0		0x01
#define NINT_P			0x00

/* UART_GCTL Register */
#define FFE			0x20
#define FPE			0x10
#define RPOLC			0x08
#define TPOLC			0x04
#define IREN			0x02
#define UCEN			0x01

#define FFE_P			0x05
#define FPE_P			0x04
#define RPOLC_P			0x03
#define TPOLC_P			0x02
#define IREN_P			0x01
#define UCEN_P			0x00

/*
 * SERIAL PORT MASKS
 */

/* SPORTx_TCR1 Masks */
#define TSPEN			0x0001	/* TX enable */
#define ITCLK			0x0002	/* Internal TX Clock Select */
#define TDTYPE			0x000C	/* TX Data Formatting Select */
#define TLSBIT			0x0010	/* TX Bit Order */
#define ITFS			0x0200	/* Internal TX Frame Sync Select */
#define TFSR			0x0400	/* TX Frame Sync Required Select */
#define DITFS			0x0800	/* Data Independent TX Frame Sync Select */
#define LTFS			0x1000	/* Low TX Frame Sync Select */
#define LATFS			0x2000	/* Late TX Frame Sync Select */
#define TCKFE			0x4000	/* TX Clock Falling Edge Select */

/* SPORTx_TCR2 Masks */
#define SLEN			0x001F	/* TX Word Length */
#define TXSE			0x0100	/* TX Secondary Enable */
#define TSFSE			0x0200	/* TX Stereo Frame Sync Enable */
#define TRFST			0x0400	/* TX Right-First Data Order */

/* SPORTx_RCR1 Masks */
#define RSPEN			0x0001	/* RX enable */
#define IRCLK			0x0002	/* Internal RX Clock Select */
#define RDTYPE			0x000C	/* RX Data Formatting Select */
#define RULAW			0x0008	/* u-Law enable */
#define RALAW			0x000C	/* A-Law enable */
#define RLSBIT			0x0010	/* RX Bit Order */
#define IRFS			0x0200	/* Internal RX Frame Sync Select */
#define RFSR			0x0400	/* RX Frame Sync Required Select */
#define LRFS			0x1000	/* Low RX Frame Sync Select */
#define LARFS			0x2000	/* Late RX Frame Sync Select */
#define RCKFE			0x4000	/* RX Clock Falling Edge Select */

/* SPORTx_RCR2 Masks */
#define SLEN			0x001F	/* RX Word Length */
#define RXSE			0x0100	/* RX Secondary Enable */
#define RSFSE			0x0200	/* RX Stereo Frame Sync Enable */
#define RRFST			0x0400	/* Right-First Data Order */

/* SPORTx_STAT Masks */
#define RXNE			0x0001	/* RX FIFO Not Empty Status */
#define RUVF			0x0002	/* RX Underflow Status */
#define ROVF			0x0004	/* RX Overflow Status */
#define TXF			0x0008	/* TX FIFO Full Status */
#define TUVF			0x0010	/* TX Underflow Status */
#define TOVF			0x0020	/* TX Overflow Status */
#define TXHRE			0x0040	/* TX Hold Register Empty */

/* SPORTx_MCMC1 Masks */
#define WSIZE			0x0000F000	/* Multichannel Window Size Field */
#define WOFF			0x000003FF	/* Multichannel Window Offset Field */

/* SPORTx_MCMC2 Masks */
#define MCCRM			0x00000003	/* Multichannel Clock Recovery Mode */
#define MCDTXPE			0x00000004	/* Multichannel DMA Transmit Packing */
#define MCDRXPE			0x00000008	/* Multichannel DMA Receive Packing */
#define MCMEN			0x00000010	/* Multichannel Frame Mode Enable */
#define FSDR			0x00000080	/* Multichannel Frame Sync to Data Relationship */
#define MFD			0x0000F000	/* Multichannel Frame Delay */

/*
 * PARALLEL PERIPHERAL INTERFACE (PPI) MASKS
 */

/* PPI_CONTROL Masks */
#define PORT_EN			0x00000001	/* PPI Port Enable */
#define PORT_DIR		0x00000002	/* PPI Port Direction */
#define XFR_TYPE		0x0000000C	/* PPI Transfer Type */
#define PORT_CFG		0x00000030	/* PPI Port Configuration */
#define FLD_SEL			0x00000040	/* PPI Active Field Select */
#define PACK_EN			0x00000080	/* PPI Packing Mode */
#define DMA32			0x00000100	/* PPI 32-bit DMA Enable */
#define SKIP_EN			0x00000200	/* PPI Skip Element Enable */
#define SKIP_EO			0x00000400	/* PPI Skip Even/Odd Elements */
#define DLENGTH			0x00003800	/* PPI Data Length */
#define DLEN_8			0x0		/* PPI Data Length mask for DLEN=8 */
#define DLEN(x)			(((x-9) & 0x07) << 11)	/* PPI Data Length (only works for x=10-->x=16) */
#define POL			0x0000C000	/* PPI Signal Polarities */

/* PPI_STATUS Masks */
#define FLD			0x00000400	/* Field Indicator */
#define FT_ERR			0x00000800	/* Frame Trac