s403_r35.bpk

条码控件： 一维条码控件 二维条码控件 PDF417Barcode MaxiCodeBarcode

# * ***** BEGIN LICENSE BLOCK *****
# * Version: MPL 1.1
# *
# * The contents of this file are subject to the Mozilla Public License Version
# * 1.1 (the "License"); you may not use this file except in compliance with
# * the License. You may obtain a copy of the License at
# * http://www.mozilla.org/MPL/
# *
# * Software distributed under the License is distributed on an "AS IS" basis,
# * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
# * for the specific language governing rights and limitations under the
# * License.
# *
# * The Original Code is TurboPower SysTools
# *
# * The Initial Developer of the Original Code is
# * TurboPower Software
# *
# * Portions created by the Initial Developer are Copyright (C) 1996-2002
# * the Initial Developer. All Rights Reserved.
# *
# * Contributor(s):
# *
# * ***** END LICENSE BLOCK ***** 

# ---------------------------------------------------------------------------
!if !$d(BCB)
BCB = $(MAKEDIR)\..
!endif

# ---------------------------------------------------------------------------
# IDE SECTION
# ---------------------------------------------------------------------------
# The following section of the project makefile is managed by the BCB IDE.
# It is recommended to use the IDE to change any of the values in this
# section.
# ---------------------------------------------------------------------------

VERSION = BCB.03
# ---------------------------------------------------------------------------
PROJECT = S403_r35.bpl
OBJFILES = ..\source\StVInfo.obj ..\source\StAstro.obj ..\source\StAstroP.obj \
  ..\source\StBarC.obj ..\source\StBarPN.obj ..\source\StBase.obj \
  ..\source\StBCD.obj ..\source\StBits.obj ..\source\StColl.obj \
  ..\source\StConst.obj ..\source\StCRC.obj ..\source\StDateSt.obj \
  ..\source\StDict.obj ..\source\StDQue.obj ..\source\StEclpse.obj \
  ..\source\StExpr.obj ..\source\StFIN.obj ..\source\StHASH.obj \
  ..\source\StJup.obj ..\source\StLArr.obj ..\source\StList.obj \
  ..\source\StMars.obj ..\source\StMath.obj ..\source\StMerc.obj \
  ..\source\StMime.obj ..\source\StNet.obj ..\source\StNetApi.obj \
  ..\source\StNetCon.obj ..\source\StNetPfm.obj ..\source\StNetMsg.obj \
  ..\source\StNeptun.obj ..\source\StNVBits.obj ..\source\StNVColl.obj \
  ..\source\StNVCont.obj ..\source\StNVDict.obj ..\source\StNVDQ.obj \
  ..\source\StNVLAry.obj ..\source\StNVList.obj ..\source\StNVLMat.obj \
  ..\source\StNVSCol.obj ..\source\StNVTree.obj ..\source\StOStr.obj \
  ..\source\StPluto.obj ..\source\StPQueue.obj ..\source\StRegIni.obj \
  ..\source\StSaturn.obj ..\source\StSort.obj ..\source\StStat.obj \
  ..\source\StStrL.obj ..\source\StStrS.obj ..\source\StStrZ.obj \
  ..\source\StText.obj ..\source\StTree.obj ..\source\StUranus.obj \
  ..\source\StUtils.obj ..\source\StVArr.obj ..\source\StVenus.obj \
  ..\source\StJupsat.obj ..\source\StDate.obj ..\source\StToHTML.obj \
  ..\source\StWmDCpy.obj ..\source\StFirst.obj ..\source\StStrms.obj \
  ..\source\StSpawn.obj ..\source\StRegEx.obj ..\source\StTxtDat.obj \
  ..\source\StExpLog.obj ..\source\StGenLog.obj ..\source\StIniStm.obj \
  ..\source\StMerge.obj ..\source\StMoney.obj ..\source\StNTLog.obj \
  ..\source\StRandom.obj ..\source\StSystem.obj ..\source\StDecMth.obj \
  ..\source\St2DBarC.obj ..\source\StStrW.obj S403_r35.obj
RESFILES = S403_r35.res
RESDEPEN = $(RESFILES)
LIBFILES =
LIBRARIES = VCLDB35.lib
SPARELIBS = VCL35.lib VCLX35.lib VCLDB35.lib
DEFFILE =
PACKAGES = VCL35.BPI vclx35.bpi
# ---------------------------------------------------------------------------
PATHCPP = .;
PATHASM = .;..\source
PATHPAS = .;
PATHRC = .;
DEBUGLIBPATH = $(BCB)\lib\debug
RELEASELIBPATH = $(BCB)\lib\release
# ---------------------------------------------------------------------------
CFLAG1 = -O2 -Hc -w -Ve -k- -vi -c -b- -w-par -w-inl -Vx
CFLAG2 = -DUSEPACKAGES -I..\source;$(BCB)\include;$(BCB)\include\vcl \
  -H=$(BCB)\lib\vcl35.csm
CFLAG3 =
PFLAGS = -DUSEPACKAGES \
  -U..\source;$(BCB)\lib\release;$(BCB)\lib\obj;$(BCB)\lib;$(RELEASELIBPATH) \
  -I..\source;$(BCB)\include;$(BCB)\include\vcl -$L- -$D- -v -JPHN -M
RFLAGS = -DUSEPACKAGES -i..\source;$(BCB)\include;$(BCB)\include\vcl
AFLAGS = /i..\source /i$(BCB)\include /i$(BCB)\include\vcl /dUSEPACKAGES /mx /w2 /zn
LFLAGS = -L..\source;$(BCB)\lib\release;$(BCB)\lib\obj;$(BCB)\lib;$(RELEASELIBPATH) \
  -D"TurboPower SysTools 4.03 Run-time package - VCL35" -aa -Tpp -Gpr -x -Gl -Gi
IFLAGS = -Gn
# ---------------------------------------------------------------------------
ALLOBJ = c0pkg32.obj $(PACKAGES) $(OBJFILES)
ALLRES = $(RESFILES)
ALLLIB = $(LIBFILES) $(LIBRARIES) import32.lib cp32mt.lib
# ---------------------------------------------------------------------------
!ifdef IDEOPTIONS

[Version Info]
IncludeVerInfo=1
AutoIncBuild=0
MajorVer=4
MinorVer=0
Release=3
Build=0
Debug=0
PreRelease=0
Special=0
Private=0
DLL=0
Locale=1033
CodePage=1252

[Version Info Keys]
CompanyName=TurboPower Software Company
FileDescription=
FileVersion=4.0.3.0
InternalName=
LegalCopyright=Copyright (c) TurboPower Software Co, 1996-2002
LegalTrademarks=
OriginalFilename=
ProductName=SysTools
ProductVersion=4.03
Comments=

[HistoryLists\hlIncludePath]
Count=3
Item0=..\source;$(BCB)\include;$(BCB)\include\vcl
Item1=$(BCB)\include;$(BCB)\include\vcl
Item2=$(BCB)\include;$(BCB)\include\vcl;c:\borland\cbuilder3\lib\debug

[HistoryLists\hlLibraryPath]
Count=4
Item0=..\source;$(BCB)\lib\release;$(BCB)\lib\obj;$(BCB)\lib
Item1=$(BCB)\lib\release;$(BCB)\lib\obj;$(BCB)\lib
Item2=..\systools;$(BCB)\lib\release;$(BCB)\lib\obj;$(BCB)\lib
Item3=$(BCB)\lib\release;$(BCB)\lib\obj;$(BCB)\lib;c:\borland\cbuilder3\lib\debug

[HistoryLists\hlDebugSourcePath]
Count=1
Item0=$(BCB)\source\vcl

[HistoryLists\hlConditionals]
Count=1
Item0=USEPACKAGES

[Debugging]
DebugSourceDirs=$(BCB)\source\vcl

[Parameters]
RunParams=
HostApplication=

!endif

# ---------------------------------------------------------------------------
# MAKE SECTION
# ---------------------------------------------------------------------------
# This section of the project file is not used by the BCB IDE.  It is for
# the benefit of building from the command-line using the MAKE utility.
# ---------------------------------------------------------------------------

.autodepend
# ---------------------------------------------------------------------------
!if !$d(BCC32)
BCC32 = bcc32
!endif

!if !$d(DCC32)
DCC32 = dcc32
!endif

!if !$d(TASM32)
TASM32 = tasm32
!endif

!if !$d(LINKER)
LINKER = ilink32
!endif

!if !$d(BRCC32)
BRCC32 = brcc32
!endif
# ---------------------------------------------------------------------------
!if $d(PATHCPP)
.PATH.CPP = $(PATHCPP)
.PATH.C   = $(PATHCPP)
!endif

!if $d(PATHPAS)
.PATH.PAS = $(PATHPAS)
!endif

!if $d(PATHASM)
.PATH.ASM = $(PATHASM)
!endif

!if $d(PATHRC)
.PATH.RC  = $(PATHRC)
!endif
# ---------------------------------------------------------------------------
$(PROJECT): $(OBJFILES) $(RESDEPEN) $(DEFFILE)
    $(BCB)\BIN\$(LINKER) @&&!
    $(LFLAGS) $(IFLAGS) +
    $(ALLOBJ), +
    $(PROJECT),, +
    $(ALLLIB), +
    $(DEFFILE), +
    $(ALLRES)
!
# ---------------------------------------------------------------------------
.pas.hpp:
    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }

.pas.obj:
    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }

.cpp.obj:
    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }

.c.obj:
    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }

.asm.obj:
    $(BCB)\BIN\$(TASM32) $(AFLAGS) $<, $@

.rc.res:
    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -fo$@ $<
# ---------------------------------------------------------------------------