main.h

44b0(arm7)一个参考代码

/***********************************************
 * NAME    : MAIN.H                          *
 * Version : 17.Apr.00                         *
 ***********************************************/


#ifndef __Main_h__
#define __Main_h__

#ifdef __cplusplus
extern "C" {
#endif

//#define DebugOut Uart_Printf

//#define min(x1,x2) ((x1<x2)? x1:x2)
//#define max(x1,x2) ((x1>x2)? x1:x2)

// ONESEC0 (62500)	//16us resolution, max 1.04 sec
//#define ONESEC1 (31250)	//32us resolution, max 2.09 sec
//#define ONESEC2 (15625)	//64us resolution, max 4.19 sec
//#define ONESEC3 (7812)	//128us resolution, max 8.38 sec
//#define ONESEC4 (MCLK/128/(0xff+1))  //@60Mhz, 128*4us resolution, max 32.53 sec

//#define NULL 0

//#define EnterPWDN(clkcon) ((void (*)(int))0xe0)(clkcon)


/*44blib.c*/
//void Delay(int time); //Watchdog Timer is used.

//void *malloc(unsigned nbyte); 
//void free(void *pt);

//void Port_Init(void);
//void Cache_Flush(void);
//void Uart_Select(int ch);
//void Uart_TxEmpty(int ch);
//void Uart_Init(int mclk,int baud);
//char Uart_Getch(void);
//char Uart_GetKey(void);
//int  Uart_GetIntNum(void);
//void Uart_SendByte(int data);
//void Uart_Printf(char *fmt,...);
//void Uart_SendString(char *pt);

//void Timer_Start(int divider); //Watchdog Timer is used.
//int Timer_Stop(void);          //Watchdog Timer is used.

//void Led_Display(int data);
//void Led_Display_CLight(int data)
//void ChangePllValue(int m,int p,int s);

//void ChangeMemCon(unsigned *pMemCfg);
//void EnableInterrupt(void);
//void DisableInterrupt(void);


void LCD_DelayUs(U32 time) ;
void wait_ms(U16 time);
void Port_Init(void);
 void Threecolerlight(void);
void Motor(U16 time);
 void speaker(U16 time);
 void Backlight(void);
 void Powersupply(void);
 void CLK13M_supply(void);
 void LCM_reset(void);
 void stopwatchdog(void);
 void startwatchdog(void);

//void ChangeMemCon(unsigned *pMemCfg);
//void EnableInterrupt(void);
//void DisableInterrupt(void);


#ifdef __cplusplus
}
#endif

#endif /*__Main_h__*/