forte.h

来自「在LINUX中实现USB摄像头视频监控的完整源代码!全部是自己移值的」· C头文件 代码 · 共 40 行

#include "config.h"
#include "sa1100.h"

/*
 * Memory map
 */
#include "sa1100_gen_memmap.h"

/*
 * Architectuer magic, machine type
 */
#include "architecture.h"
#define MACH_TYPE		221
#define ARCHITECTURE_MAGIC      ((ARM_PLATFORM << 24) | (ARM_SA1100_CPU << 16) | \
	                          MACH_TYPE)

/*
 */
#define UART_BAUD_RATE          115200

/*
 */
#define DRAM_MDCNFG_ENABLE	MDCNFG_BANK0_ENABLE
#define DRAM_MDCNFG_32MB	(MDCNFG_BANK0_ENABLE | MDCNFG_DTIM0_SDRAM | \
				MDCNFG_DWID0_32B | MDCNFG_DRAC0(5) | \
				MDCNFG_TRP0(2) | MDCNFG_TDL0(3) | MDCNFG_TWR0(3))
#define DRAM_MDCNFG		DRAM_MDCNFG_32MB
#define DRAM_CAS0_WAVEFORM0	0xAAAAAA9f
#define DRAM_CAS0_WAVEFORM1	0xAAAAAAAA
#define DRAM_CAS0_WAVEFORM2	0xAAAAAAAA
#define DRAM_MDREFR		(MDREFR_TRASR(1) | MDREFR_DRI(512) | \
				MDREFR_E1PIN | MDREFR_K1RUN | \
				MDREFR_EAPD | MDREFR_KAPD)
#define MSC0_CONFIG		(MSC_RT_BURST8 | MSC_RBW32 | \
				MSC_RDF(14) | MSC_RDN(3) | MSC_RRR(4))
#define MSC1_CONFIG		0xFFF8FFF8
//#define MSC2_CONFIG		0xFFF8FFF8
#define MSC2_CONFIG		0x6479241d
#define MECR_CONFIG		0x994A994A