delay1ms.lst

波形发生器

                     <      	//... Define for P_AD_Ctrl ....................
                     <      	.DEFINE	C_AD					0x0001;			//
                     <      	.DEFINE C_DA					0x0000;			//
                     <      	.DEFINE C_MIC					0x0000;			//
                     <      	.DEFINE C_LINE					0x0002;			//
                     <      	
                     <      	//... Define for P_DA_Ctrl ....................
                     <      	.DEFINE C_PushPull				0x0000;			// b0, (default) 
                     <      	.DEFINE C_DoubleEnd				0x0001;			// b0
                     <      	.DEFINE	C_DAC_Mode				0x0000;			// b1, (default)
                     <      	.DEFINE C_PWM_Mode				0x0002;			// b1
                     <      	
                     <      	.DEFINE	C_D1_Direct				0x0000;			// DAC1 latch
                     <      	.DEFINE C_D1_LatchA				0x0008;			// 
                     <      	.DEFINE C_D1_LatchB				0x0010;			//
                     <      	.DEFINE C_D1_LatchAB			0x0018;			//
                     <      	
                     <      	.DEFINE	C_D2_Direct				0x0000;			// DAC2 latch
                     <      	.DEFINE C_D2_LatchA				0x0020;			// 
                     <      	.DEFINE C_D2_LatchB				0x0040;			//
                     <      	.DEFINE C_D2_LatchAB			0x00C0;			//
                     <      	
                     <      	//... Define for P_LVD_Ctrl ...................
                     <      	.DEFINE C_LVD24V				0x0000;			// LVD = 2.4V 
                     <      	.DEFINE C_LVD28V				0x0001;			// LVD = 2.8V
                     <      	.DEFINE C_LVD32V				0x0002;			// LVD = 3.2V
                     <      	.DEFINE C_LVD36V				0x0003;			// LVD = 3.6V
                     <      	
                     <      	
                     <      	.EXTERNAL	F_SP_Read_INT_Status;			// for further use
                     <      	.EXTERNAL 	F_SP_Write_INT_Status;			// for further use
                     <      	.EXTERNAL  	F_SP_Set_INT_Vector;			// for further use
                     <      	.EXTERNAL	F_SP_Clear_INT_Vector;			// for further use
                     <      	
                     <      	.EXTERNAL	F_SP_Send_Out;					//
                     <      	.EXTERNAL	F_SP_Send_DAC1;					//
                     <      	.EXTERNAL	F_SP_Send_DAC2;					//
                     <      	.EXTERNAL	F_SP_Send_Two_DAC;				//
                     <      	.EXTERNAL	F_SP_Init_HW;					//
                     <      	
                     <      	.EXTERNAL	R_InterruptStatus;
                     <      	
                     <      	
                     <      	.EXTERNAL 	F_SP_RampUpDAC1;
                     <      	.EXTERNAL 	F_SP_RampDnDAC1;
                     <      	.EXTERNAL 	F_SP_RampUpDAC2;
                     <      	.EXTERNAL  	F_SP_RampDnDAC2;
                     <      	
                     <      	.EXTERNAL 	F_SP_InitQueue;
                     <      	.EXTERNAL 	F_SP_ReadQueue;
                     <      	.EXTERNAL 	F_SP_WriteQueue;
                     <      	.EXTERNAL 	F_SP_TestQueue;
                     <      	
                     <      	
                     <      	
                     <      	.EXTERNAL	F_SP_Get_ADC
                     <      	
                     <      	.EXTERNAL 	F_SP_Set_P_TimerA_Ctrl
                     <      	.EXTERNAL 	F_SP_Set_P_TimerA_Data
                     <      	.EXTERNAL 	F_SP_Set_P_TimerB_Ctrl
                     <      	.EXTERNAL 	F_SP_Set_P_TimerB_Data
                     <      	.EXTERNAL 	F_SP_Set_P_INT_Ctrl
                     <      	.EXTERNAL 	F_SP_Set_P_INT_Clear
                     <      	.EXTERNAL 	F_SP_Set_P_SystemClock
                     <      	.EXTERNAL 	F_SP_Set_P_DAC_Ctrl
                     <      	.EXTERNAL 	F_SP_Set_P_ADC_Ctrl
                     <      	
                     <      		
                     <      	
                     <      	//--------------------------------------------
                     <      	SACM_MACRO1: 	.MACRO
                     <      		
                     <      		.ENDM
                     <      	
                     <      	SACM_MACRO2:	.MACRO
                     <      		
                     <      		.ENDM
                     <      	
                     <      	
                     <      	
                     <      	
                     <      	//.define PC_Play_Enable_A2000		1    	// Enable the PC-Play function for SACM-A2000 module
                     <      	//.define PC_Play_Enable_S480		1    	// Enable the PC-Play function for SACM-S480 module
                     <      	//.define PC_Play_Enable_S240		1    	// Enable the PC-Play function for SACM-S240 module    
                     <      	//.define PC_Play_Enable_MS01		1    	// Enable the PC-Play function for SACM-MS01 module
                     <      	
                     <      	
                     <      	
                     <      	//========================================================================================        
                     <      	// End of hardware.inc
                     <      	//========================================================================================
                            	
                            	
0000A818                    	.code
                            	.public _delay
                            	_delay:
                            	   
                            	    
0000A818 41 02              	    r1+=1;
0000A819 00 EE              	    nop
0000A81A 00 EE              	    nop
0000A81B 00 EE              	    nop
0000A81C 00 EE              	    nop
0000A81D 00 EE              	    nop
0000A81E 00 EE              	    nop
                            	    
0000A81F 90 9A              	    retf;
                            	 
                            	 .public _car_wait
                            	_car_wait: .proc
                            	   wait1: 
0000A820 40 92              	    r1=0;
0000A821 0A 95 FF FF        	        r2=0xffff;
0000A823 41 02              	       wait:  r1+=1
0000A824 02 43              	             cmp r1,r2
0000A825 43 0E              	              jb wait
0000A826 41 06              	        r3+=1
0000A827 04 47              	        cmp r3,r4
0000A828 49 0E              	        jb wait1
                            	        
0000A829 70 92              	        r1=0x0030
                            	     .endp
                            	.public _F_Apwm;
                            	_F_Apwm:.proc
                            	
0000A82A 09 93 00 01        	R1=0x0100			 //将IOB8设置成同相输出端口 
0000A82C 19 D3 07 70        	[P_IOB_Dir]=R1
0000A82E 19 D3 08 70        	[P_IOB_Attrib] = R1
0000A830 4C 92              	R1=0x000c
0000A831 19 D3 05 70        	[P_IOB_Data]=R1
                            	//设置TimerA的APWMO信号的周期Tapwmo=(12.288MHz / 512) / 16 = 1.5KHz，设
                            	//置信号的占空比APWMO
                            	//Tduty= (3/16)*Tapwmo。详细内容请参见定时器/计数器部分。
0000A833 11 93 02 02        	R1=[_Mk_Z6]			 //选择计数频率与占空比
0000A835 19 D3 0B 70        	[P_TimerA_Ctrl]=R1
0000A837 09 93 FF FD        	R1=0xFDFF            //设置TimerA的计数初值
0000A839 19 D3 0A 70        	[P_TimerA_Data]=R1
0000A83B 90 9A              	retf
                            	.end
0 error(s), 0 warning(s).