delay10s.lst

波形发生器

                     <      	
                     <      	//... Define for P_DA_Ctrl ....................
                     <      	.DEFINE C_PushPull				0x0000;			// b0, (default) 
                     <      	.DEFINE C_DoubleEnd				0x0001;			// b0
                     <      	.DEFINE	C_DAC_Mode				0x0000;			// b1, (default)
                     <      	.DEFINE C_PWM_Mode				0x0002;			// b1
                     <      	
                     <      	.DEFINE	C_D1_Direct				0x0000;			// DAC1 latch
                     <      	.DEFINE C_D1_LatchA				0x0008;			// 
                     <      	.DEFINE C_D1_LatchB				0x0010;			//
                     <      	.DEFINE C_D1_LatchAB			0x0018;			//
                     <      	
                     <      	.DEFINE	C_D2_Direct				0x0000;			// DAC2 latch
                     <      	.DEFINE C_D2_LatchA				0x0020;			// 
                     <      	.DEFINE C_D2_LatchB				0x0040;			//
                     <      	.DEFINE C_D2_LatchAB			0x00C0;			//
                     <      	
                     <      	//... Define for P_LVD_Ctrl ...................
                     <      	.DEFINE C_LVD24V				0x0000;			// LVD = 2.4V 
                     <      	.DEFINE C_LVD28V				0x0001;			// LVD = 2.8V
                     <      	.DEFINE C_LVD32V				0x0002;			// LVD = 3.2V
                     <      	.DEFINE C_LVD36V				0x0003;			// LVD = 3.6V
                     <      	
                     <      	
                     <      	.EXTERNAL	F_SP_Read_INT_Status;			// for further use
                     <      	.EXTERNAL 	F_SP_Write_INT_Status;			// for further use
                     <      	.EXTERNAL  	F_SP_Set_INT_Vector;			// for further use
                     <      	.EXTERNAL	F_SP_Clear_INT_Vector;			// for further use
                     <      	
                     <      	.EXTERNAL	F_SP_Send_Out;					//
                     <      	.EXTERNAL	F_SP_Send_DAC1;					//
                     <      	.EXTERNAL	F_SP_Send_DAC2;					//
                     <      	.EXTERNAL	F_SP_Send_Two_DAC;				//
                     <      	.EXTERNAL	F_SP_Init_HW;					//
                     <      	
                     <      	.EXTERNAL	R_InterruptStatus;
                     <      	
                     <      	
                     <      	.EXTERNAL 	F_SP_RampUpDAC1;
                     <      	.EXTERNAL 	F_SP_RampDnDAC1;
                     <      	.EXTERNAL 	F_SP_RampUpDAC2;
                     <      	.EXTERNAL  	F_SP_RampDnDAC2;
                     <      	
                     <      	.EXTERNAL 	F_SP_InitQueue;
                     <      	.EXTERNAL 	F_SP_ReadQueue;
                     <      	.EXTERNAL 	F_SP_WriteQueue;
                     <      	.EXTERNAL 	F_SP_TestQueue;
                     <      	
                     <      	
                     <      	
                     <      	.EXTERNAL	F_SP_Get_ADC
                     <      	
                     <      	.EXTERNAL 	F_SP_Set_P_TimerA_Ctrl
                     <      	.EXTERNAL 	F_SP_Set_P_TimerA_Data
                     <      	.EXTERNAL 	F_SP_Set_P_TimerB_Ctrl
                     <      	.EXTERNAL 	F_SP_Set_P_TimerB_Data
                     <      	.EXTERNAL 	F_SP_Set_P_INT_Ctrl
                     <      	.EXTERNAL 	F_SP_Set_P_INT_Clear
                     <      	.EXTERNAL 	F_SP_Set_P_SystemClock
                     <      	.EXTERNAL 	F_SP_Set_P_DAC_Ctrl
                     <      	.EXTERNAL 	F_SP_Set_P_ADC_Ctrl
                     <      	
                     <      		
                     <      	
                     <      	//--------------------------------------------
                     <      	SACM_MACRO1: 	.MACRO
                     <      		
                     <      		.ENDM
                     <      	
                     <      	SACM_MACRO2:	.MACRO
                     <      		
                     <      		.ENDM
                     <      	
                     <      	
                     <      	
                     <      	
                     <      	//.define PC_Play_Enable_A2000		1    	// Enable the PC-Play function for SACM-A2000 module
                     <      	//.define PC_Play_Enable_S480		1    	// Enable the PC-Play function for SACM-S480 module
                     <      	//.define PC_Play_Enable_S240		1    	// Enable the PC-Play function for SACM-S240 module    
                     <      	//.define PC_Play_Enable_MS01		1    	// Enable the PC-Play function for SACM-MS01 module
                     <      	
                     <      	
                     <      	
                     <      	//========================================================================================        
                     <      	// End of hardware.inc
                     <      	//========================================================================================
                            	.define RUN_2HZ_TimeBase_INT 0x0004
00000020                    	.iram
00000020 00 00 00 00        	.var flag=0,led=0
                            	
                            	
00009A4F                    	.code
                            	.public  _delay10s
                            	_delay10s:.proc
                            	      
                            	      
00009A4F 44 92              	     r1=RUN_2HZ_TimeBase_INT;
00009A50 19 D3 10 70        	     [P_INT_Ctrl]=r1;
00009A52 41 F1              	     INT IRQ;
                            	    // r1=[flag];
                            	    
                            	    //[flag]=r1;
                            	   //  cmp r1,2;
                            	    // jb reset;
                            	   //   r1=[flag];
                            	    // r1=0x0000;
                            	    //  [flag]=r1;
                            	   //   retf;
                            	    reset:
00009A53 00 EE              	      nop;
00009A54 00 EE              	      nop;
00009A55 0F 9F 53 9A        	    goto reset;
                            	    .endp
                            	    
                            	    
00008144                    	.TEXT
                            	.PUBLIC _IRQ5
                            	_IRQ5:
00008144 A8 DA              	    push r1,r5 to [sp];
00008145 44 92              	    r1=0x0004;
00008146 11 C3 10 70        	    test r1,[P_INT_Ctrl];
00008148 03 4E              	    jnz IRQ5_2HZ;
                            	 IRQ5_4HZ:
00008149 48 92              	    R1=0x0008;
0000814A 0F 9F 55 81        	    goto Exit_INT;
                            	 IRQ5_2HZ:
0000814C 11 93 20 00        	   r1=[flag];
0000814E 41 02              	   r1+=1;
0000814F 19 D3 20 00        	   [flag]=r1;
00008151 7C 42              	    cmp r1,60;
00008152 02 0E              	    jb Exit_INT;
00008153 49 F1              	  irq on;
00008154 48 F1              	  irq off;
                            	     /////////////////
                            	     
                            	  Exit_INT:
00008155 19 D3 11 70        	    [P_INT_Clear]=r1;
00008157 A8 90              	    pop r1,r5 from [sp];
00008158 98 9A              	    RETI;
                            	    
0 error(s), 0 warning(s).