uart.lst

能同时进行多路数据采集

                     <      	.DEFINE C_MIC					0x0000;			//
                     <      	.DEFINE C_LINE					0x0002;			//
                     <      	
                     <      	//... Define for P_DA_Ctrl ....................
                     <      	.DEFINE C_PushPull				0x0000;			// b0, (default) 
                     <      	.DEFINE C_DoubleEnd				0x0001;			// b0
                     <      	.DEFINE	C_DAC_Mode				0x0000;			// b1, (default)
                     <      	.DEFINE C_PWM_Mode				0x0002;			// b1
                     <      	
                     <      	.DEFINE	C_D1_Direct				0x0000;			// DAC1 latch
                     <      	.DEFINE C_D1_LatchA				0x0008;			// 
                     <      	.DEFINE C_D1_LatchB				0x0010;			//
                     <      	.DEFINE C_D1_LatchAB			0x0018;			//
                     <      	
                     <      	.DEFINE	C_D2_Direct				0x0000;			// DAC2 latch
                     <      	.DEFINE C_D2_LatchA				0x0020;			// 
                     <      	.DEFINE C_D2_LatchB				0x0040;			//
                     <      	.DEFINE C_D2_LatchAB			0x00C0;			//
                     <      	
                     <      	//... Define for P_LVD_Ctrl ...................
                     <      	.DEFINE C_LVD24V				0x0000;			// LVD = 2.4V 
                     <      	.DEFINE C_LVD28V				0x0001;			// LVD = 2.8V
                     <      	.DEFINE C_LVD32V				0x0002;			// LVD = 3.2V
                     <      	.DEFINE C_LVD36V				0x0003;			// LVD = 3.6V
                     <      	
                     <      	
                     <      	.EXTERNAL	F_SP_Read_INT_Status;			// for further use
                     <      	.EXTERNAL 	F_SP_Write_INT_Status;			// for further use
                     <      	.EXTERNAL  	F_SP_Set_INT_Vector;			// for further use
                     <      	.EXTERNAL	F_SP_Clear_INT_Vector;			// for further use
                     <      	
                     <      	.EXTERNAL	F_SP_Send_Out;					//
                     <      	.EXTERNAL	F_SP_Send_DAC1;					//
                     <      	.EXTERNAL	F_SP_Send_DAC2;					//
                     <      	.EXTERNAL	F_SP_Send_Two_DAC;				//
                     <      	.EXTERNAL	F_SP_Init_HW;					//
                     <      	
                     <      	.EXTERNAL	R_InterruptStatus;
                     <      	
                     <      	
                     <      	.EXTERNAL 	F_SP_RampUpDAC1;
                     <      	.EXTERNAL 	F_SP_RampDnDAC1;
                     <      	.EXTERNAL 	F_SP_RampUpDAC2;
                     <      	.EXTERNAL  	F_SP_RampDnDAC2;
                     <      	
                     <      	.EXTERNAL 	F_SP_InitQueue;
                     <      	.EXTERNAL 	F_SP_ReadQueue;
                     <      	.EXTERNAL 	F_SP_WriteQueue;
                     <      	.EXTERNAL 	F_SP_TestQueue;
                     <      	
                     <      	
                     <      	
                     <      	.EXTERNAL	F_SP_Get_ADC
                     <      	
                     <      	.EXTERNAL 	F_SP_Set_P_TimerA_Ctrl
                     <      	.EXTERNAL 	F_SP_Set_P_TimerA_Data
                     <      	.EXTERNAL 	F_SP_Set_P_TimerB_Ctrl
                     <      	.EXTERNAL 	F_SP_Set_P_TimerB_Data
                     <      	.EXTERNAL 	F_SP_Set_P_INT_Ctrl
                     <      	.EXTERNAL 	F_SP_Set_P_INT_Clear
                     <      	.EXTERNAL 	F_SP_Set_P_SystemClock
                     <      	.EXTERNAL 	F_SP_Set_P_DAC_Ctrl
                     <      	.EXTERNAL 	F_SP_Set_P_ADC_Ctrl
                     <      	
                     <      		
                     <      	
                     <      	//--------------------------------------------
                     <      	SACM_MACRO1: 	.MACRO
                     <      		
                     <      		.ENDM
                     <      	
                     <      	SACM_MACRO2:	.MACRO
                     <      		
                     <      		.ENDM
                     <      	
                     <      	
                     <      	
                     <      	
                     <      	//.define PC_Play_Enable_A2000		1    	// Enable the PC-Play function for SACM-A2000 module
                     <      	//.define PC_Play_Enable_S480		1    	// Enable the PC-Play function for SACM-S480 module
                     <      	//.define PC_Play_Enable_S240		1    	// Enable the PC-Play function for SACM-S240 module    
                     <      	//.define PC_Play_Enable_MS01		1    	// Enable the PC-Play function for SACM-MS01 module
                     <      	
                     <      	
                     <      	
                     <      	//========================================================================================        
                     <      	// End of hardware.inc
                     <      	//========================================================================================
00008110                    	.CODE
                            	
                            	//========================================================================================================
                            	//函数: F_UART_Initial
                            	//语法：void F_UART_Initial()
                            	//描述：初始化UART
                            	//参数：无
                            	//返回：无
                            	//========================================================================================================
                            	
                            	.PUBLIC _F_UART_Initial;
                            	_F_UART_Initial:		
00008110 40 F1              		INT OFF;
00008111 40 92              		r1 = 0x0000;			//未使能任何中断
00008112 19 D3 10 70        		[P_INT_Ctrl] = r1;
00008114 09 93 80 04        		r1 = 0x0480;	        //设置IOB7为输入IOB10为输出
00008116 19 D3 08 70        		[P_IOB_Attrib] = r1;
00008118 09 93 00 04        		R1 = 0x0400;
0000811A 19 D3 07 70        		[P_IOB_Dir] = R1;
0000811C 40 92              		R1 = 0x0000;	
0000811D 19 D3 05 70        		[P_IOB_Data] = R1;
                            	
0000811F 09 93 6B 00        	   	R1 = 0x006b;	     	//设置波特率为115.2Kbps
00008121 19 D3 24 70        	    [P_UART_BaudScalarLow] = R1;
00008123 40 92              		R1 = 0x0000;
00008124 19 D3 25 70        	    [P_UART_BaudScalarHigh] = R1;
                            		
                            		
00008126 09 93 80 00        		R1 = 0x0080;
00008128 19 D3 21 70        		[P_UART_Command1] = R1;
0000812A 0C 99 C0 00        		R4 = 0x00C0;		    //使能输入和输出
0000812C 1C D9 22 70        		[P_UART_Command2] = R4;
0000812E 49 F1              		IRQ ON	
0000812F 90 9A              		RETF
                            		
                            	//========================================================================================================
                            	//函数: F_UART_Write
                            	//语法：void F_UART_Write(unsigned int)
                            	//描述：写UART
                            	//参数：为要写入串口的值，其低8bit为有效值。
                            	//返回：无
                            	//========================================================================================================
                            	.PUBLIC _F_UART_WriteByteData
                            	_F_UART_WriteByteData:
00008130 A8 DA              		PUSH r1,r5 TO [sp]
00008131 08 0B 01 00        		bp=sp+1;
00008133 07 92              		r1=[bp+7];//command value
00008134 0C 99 FF FF        		r4=0xFFFF;
                            	L_Check_TxRDY:
00008136 41 96              		r3=0x0001;
00008137 1B D7 12 70        		[P_Watchdog_Clear]=r3;
00008139 41 28              		r4-=1;
0000813A 07 5E              		JZ L_UART_Write_Timeout;
0000813B 12 95 22 70        		r2 = [P_UART_Command2];
0000813D 0A B5 40 00        		r2 &= 0x0040;			//检测输出是否READY
0000813F 4A 5E              		JZ L_Check_TxRDY;
00008140 19 D3 23 70        		[P_UART_Data] = r1;//send data
                            	L_UART_Write_Timeout:	
00008142 A8 90              		POP r1,r5 FROM [SP]
00008143 90 9A              		RETF;
                            	
                            	
0 error(s), 0 warning(s).