ctcaldat.c

free sources for gsm

/*
Copyright (C) 1999 Optimay GmbH. All Rights Reserved.

File:   ct\trident\ctcaldat.c
Desc:   Handling of most HW calibration data elements. The powerramps and
        the Rf gain calibration table are handeld in a separate file.
Author: Sunna Darcy, Optimay GmbH
Date:   April 2000
Notes:


   $Source  base\ct\ctcaldat.c  (Clearcase Element) $

$Log: $
 * MKNICKER         9. Nov. 2004  15:52:29  RB: rb_gsmms2, IB: REL_MGMT_025, PB: MKN_00174__a, Rev: 2
 * -> OCR00007339   PSC ADC state machine broken
 *   remove obsolete PSC version dependency because ADC state machine is designed to operate on a hardware abstraction layer for many PSC versions
 *   Defines for PSC variants and ADC state machine mixed up
 *
 * BRANDSMA         22. Jul. 2004  18:13:20  RB: rb_gsmms2, IB: MAINT_024, PB: BRA000068, Rev: 1
 * -> OCR00007628   PTE commands 慡etRFConfigCal?and 慙1RFConfig? don't work
 * -> OCR00007549   ContTxOnAllSlots doesn't configure ramp data for TS1
 *
 * JUNG             13. Jul. 2004  16:13:14  RB: rb_gsmms2, IB: MAINT_024, PB: jun00004, Rev: 1
 * -> OCR00007558   problems in new PTE cmd for renesas RF
 *
 * IMANYA           23. Jun. 2004  16:26:24  RB: rb_gsmms2, IB: MAINT_024, PB: ima00031, Rev: 1
 * -> OCR00007322   GenDLScript PTE cmd doesn't cover 8psk calibration data
 * -> OCR00007317   PTE to support calibration of RX - TX frequency offset
 * -> OCR00007316   new PTE command to store parameters for RFConfig command
 *
 * BRANDSMA         9. Jun. 2004  13:42:01  RB: rb_gsmms2, IB: REL_MGMT_024, PB: BRA000055, Rev: 1
 * -> OCR00007322   GenDLScript PTE cmd doesn't cover 8psk calibration data
 * -> OCR00007317   PTE to support calibration of RX - TX frequency offset
 * -> OCR00007316   new PTE command to store parameters for RFConfig command
 *
 * IMANYA           25. May. 2004  20:08:11  RB: rb_gsmms2, IB: MAINT_024, PB: ima00026, Rev: 1
 * -> OCR00006928   PTE, Dual TX ramp data for GMSK and 8PSK each
 *
 * BRANDSMA         8. Apr. 2004  14:19:01  RB: rb_gsmms2, IB: REL_MGMT_024, PB: SJB000045, Rev: 1
 * -> OCR00006928   PTE, Dual TX ramp data for GMSK and 8PSK each
 *
 * JVIAENE          19. Feb. 2004  13:21:30  RB: rb_gsmms2, IB: REL_MGMT_023C, PB: jvi040216_rel23c, Rev: 2
 * -> OCR00006568   PSC drivers clean-up
 *
 * JVIAENE          11. Feb. 2004  20:37:28  RB: rb_gsmms2, IB: REL_MGMT_023C, PB: jvi040204_rel23c__c, Rev: 1
 * -> OCR00006457   Battery management on Vienna
 *
 * BRANDSMA         28. Jan. 2004  19:12:45  RB: rb_gsmms2, IB: REL_MGMT_023C, PB: SJB00026, Rev: 1
 * -> OCR00006385   Restructure Vienna build to allow for placing platform/HW-specific files in local folders
 *
 * BRANDSMA         23. Jan. 2004  16:39:54  RB: rb_gsmms2, IB: REL_MGMT_023C, PB: SJB00024, Rev: 2
 * -> OCR00006342   MARS Radio, RF Calibration and AFC implementation changes
 *
 * JVIAENE          27. Okt. 2003  19:05:02  RB: rb_gsmms2, IB: REL_MGMT_023B, PB: EHO00073, Rev: 2
 * -> OCR00005685   remove lint warnings in the EDGE-SI build
 *
 * JVIAENE          21. Okt. 2003  12:23:46  RB: rb_gsmms2, IB: REL_MGMT_023B, PB: jvi031020_rel23b, Rev: 1
 * -> OCR00005088   SW Support for Gemini Rev B
 *   Changed defines with CSP2200A to defines with CSP2200
 *
 * PGREATHEAD       8. Okt. 2003  16:58:18  RB: rb_gsmms2, IB: EDGE_DVL2, PB: PGR378, Rev: 1
 * -> OCR00005156   Master OCR for Rel99 monitoring changes
 *
 * FRUEHWALD        15. Sep. 2003  16:28:56  RB: rb_gsmms2, IB: EDGE_DVL2, PB: ffr010903_edge__b, Rev: 1
 * -> OCR00005457   Integration of custt3 MMI to baseline
 *   PLL cal table is no longer needed, remove/diable the resp. code therefore
 *
 * HSCHIESSL        1. Sep. 2003  19:11:11  RB: rb_gsmms2, IB: REL_MGMT_022, PB: HSC00099, Rev: 1
 * -> OCR00005387   Separate Rel99 Measurement builds plus separation support tasks.
 *
 * HAIWANG          21. Aug. 2003  17:38:47  RB: rb_gsmms2, IB: REL_MGMT_022, PB: HAI00222, Rev: 2
 * -> OCR00005195   First call on HP evaluation board and prepare customer HP sub builder in baseline
 *
 * MKIESSLING       14. Aug. 2003  14:29:42  RB: rb_gsmms2, IB: REL_MGMT_022, PB: mki00211, Rev: 2
 * -> OCR00005195   First call on HP evaluation board and prepare customer HP sub builder in baseline
 *
 * MKIESSLING       31. Jul. 2003  10:05:22  RB: rb_gsmms2, IB: REL_MGMT_022, PB: mki00211, Rev: 1
 *   Remove RVCT compiler warning according string handling
 *
 * HAIWANG          20. May. 2003  11:11:01  RB: rb_gsmms2, IB: REL_MGMT_021, PB: HAI00214, Rev: 5
 * -> OCR00004661   Change the calibration structure to match EDGE RF and add new PTE command
 *
 * JVIAENE          20. May. 2003  11:23:15  RB: rb_gsmms2, IB: REL_MGMT_021, PB: jvi00061, Rev: 1
 * -> OCR00004501   Florence / Gemini changes - Phase II
 *
 * EHIRSCH          11. Apr. 2003  17:11:37  RB: rb_gsmms2, IB: REL_MGMT_021, PB: ech000403, Rev: 1
 * -> OCR00004403   Custt Edge Platform Modifications
 *
 * JVIAENE          26. Feb. 2003  17:41:53  RB: rb_gsmms2, IB: REL_MGMT_020, PB: jvi00051, Rev: 1
 * -> OCR00003794   PTE,  GENDSCRIPT and LISTCALDATA command cleanup for Nice
 *
 * WSCHODERER       24. Feb. 2003  18:00:53  RB: rb_gsmms2, IB: REL_MGMT_020, PB: wos002011, Rev: 2
 * -> OCR00003992   baseline restructuring for HW platform specific code
 *
 * JVIAENE          3. Feb. 2003  15:11:19  RB: rb_gsmms2, IB: REL_MGMT_020, PB: jvi00046, Rev: 1
 * -> OCR00003789   PTE, Nice, Need new PTE/DSP commands to send AFCDAC settings
 *
 * MKIESSLING       23. Jan. 2003  17:27:22  RB: rb_gsmms2, IB: REL_MGMT_020, PB: mki00171__b, Rev: 2
 * -> OCR00003872   PTE, CTEnableDSPDCROffset( ) sends garbage response string
 *
 * JVIAENE          21. Jan. 2003  14:22:12  RB: rb_gsmms2, IB: REL_MGMT_020, PB: jvi00043, Rev: 2
 * -> OCR00003795   PTE, Add command alias
 *
 * MKIESSLING       17. Jan. 2003  13:44:05  RB: rb_gsmms2, IB: REL_MGMT_020, PB: mki00171__a, Rev: 1
 * -> OCR00003527   PTE,  Add general purpose DSP Peek/Poke wrapper
 *

 * KTUCHMAN         8. Nov. 2002  15:42:44  RB: rb_gsmms2, IB: REL_MGMT_019, PB: ktu00174, Rev: 2
 * -> OCR00003100   PTE, Add DSP RAM DCR offset calibration commands
 *
 * KTUCHMAN         7. Nov. 2002  14:12:21  RB: rb_gsmms2, IB: REL_MGMT_019, PB: ktu00174, Rev: 1
 * -> OCR00003469   PTE,  CDAC value is incorrect. Automated testing on Nice not possible.
 *
 * FRUEHWALD        23. Sep. 2002  14:24:19  RB: rb_gsmms2, IB: REL_MGMT_018, PB: ffr0902__a, Rev: 2
 * -> OCR00003232   REL_MGMT_018_020903_IOTRACER killed a few lab-test PTE commands
 *
 * GRAEMEANDERSON   25. Aug. 2002  17:56:33  RB: rb_gsmms2, IB: REL_MGMT_018, PB: GAN00100, Rev: 1
 * -> OCR00000975   PTE serial port throughput must be sped up.
 *   Optimise large PTE lisitings if using the IOTRACER feature
 *
 * GRAEMEANDERSON   6. Aug. 2002  9:10:42  RB: rb_gsmms2, IB: REL_MGMT_017, PB: GAN00096, Rev: 2
 * -> OCR00000975   PTE serial port throughput must be sped up.
 *   Update delay calculation for callback fn showing full cal data function to be optimised for the IO TRACER.
 *
 * GRAEMEANDERSON   12. Jul. 2002  11:15:37  RB: rb_gsmms2, IB: REL_MGMT_017, PB: GAN00096, Rev: 1
 * -> OCR00002038   Move tracing serial port interface to the IO Driver
 *
 * TSELIG           25. Jul. 2002  16:12:04  RB: rb_gsmms2, IB: REL_MGMT_017, PB: TSE00094__a, Rev: 1
 * -> OCR00002923   PTE command dobattmess is causing a crash
 *
 * GRAEMEANDERSON   25. Jul. 2002  15:02:05  RB: rb_gsmms2, IB: REL_MGMT_017, PB: GAN00097__a, Rev: 1
 * -> OCR00002923   PTE command dobattmess is causing a crash
 *   Fix bug in dobattmeas command
 *
 * GRAEMEANDERSON   12. Jun. 2002  11:26:39  RB: rb_gsmms2, IB: REL_MGMT_017, PB: GAN00095, Rev: 4
 * -> OCR00001727   Remove Lint Warnings in Source Code
 *   Fix regtest warnings resulting from the big lint clean up
 *
 * GRAEMEANDERSON   11. Jun. 2002  9:55:34  RB: rb_gsmms2, IB: REL_MGMT_017, PB: GAN00095, Rev: 3
 * -> OCR00001727   Remove Lint Warnings in Source Code
 *   ShowCalStruct reg test warning fix.
 *
 * GRAEMEANDERSON   10. Jun. 2002  21:22:40  RB: rb_gsmms2, IB: REL_MGMT_017, PB: GAN00095, Rev: 2
 *   Reg test warning fixes after extreme linting
 *
 * GRAEMEANDERSON   10. Jun. 2002  18:41:05  RB: rb_gsmms2, IB: REL_MGMT_017, PB: GAN00095, Rev: 1
 * -> OCR00002634   Add DCR elements to PTE ShowCalData, GenDLScript and ShowDefCalData commands
 * -> OCR00001727   Remove Lint Warnings in Source Code
 *   Add DCR offset elements to commands which display all cal data.
 *   Lint clean up
 *
 * MZOELLER         9. May. 2002  14:29:52  RB: rb_gsmms2, IB: REL_MGMT_016, PB: mzopb00019, Rev: 1
 * -> OCR00002472   Add new config files for CUSTT integration
 *
 * GRAEMEANDERSON   11. Dec. 2001  14:52:08  RB: rb_gsmms2, IB: PBCCH_DVL, PB: GAN00080, Rev: 2
 * -> OCR00001719   Implement PTE for S100 product
 *   Correct the type being used for number of ADC channels
 *
 * GRAEMEANDERSON   11. Dec. 2001  11:35:28  RB: rb_gsmms2, IB: PBCCH_DVL, PB: GAN00080, Rev: 1
 * -> OCR00001719   Implement PTE for S100 product
 *   Update to remove redundant code and ifdefs.
 *
 * NGORIS           5. Dec. 2001  19:12:04  RB: rb_gsmms2, IB: PBCCH_DVL, PB: ngo00072, Rev: 1
 *   Merge from REL_12 to PBCCh.
 *
 * WSCHEIT          29. Nov. 2001  18:22:56  RB: rb_gsmms2, IB: PBCCH_DVL, PB: wsc00056, Rev: 1
 *   Integrated CUSTT1 into baseline
 *
 * ANOCK            29. Nov. 2001  16:45:25  RB: rb_gsmms2, IB: REL_MGMT_012, PB: ANO00087, Rev: 1
 *   Deleted unnecessary initialisation of a variable and one variable
 *   completely to avoid the BC warnings "assigned a value that is never used".
 *
 * GRAEMEANDERSON   27. Nov. 2001  11:37:36  RB: rb_gsmms2, IB: REL_MGMT_012, PB: GAN00075__b, Rev: 1
 *   Linted first pass for tidy up
 *
 * GRAEMEANDERSON   24. Okt. 2001  12:08:06  RB: rb_gsmms2, IB: REL_MGMT_011, PB: GAN00072__c, Rev: 1
 * -> OCR00001458   Add RF DCR Offset calibration support to the Seville platform
 *   Add DCR offset calibration commands temporarily with CUSTB2. Need to move them to the custb2/ct/ctcust.c file directory if this turns out to be a long term solution (unlikely)
 *
 * GRAEMEANDERSON   17. Okt. 2001  16:00:31  RB: rb_gsmms2, IB: REL_MGMT_011, PB: GAN00072, Rev: 1
 * -> OCR00001456   Restructure PTE to be cal structure generic
 *   Rewrite code which accesses the calibration data structure to make it generic and compatable to any user allocations of RF bands and ramps, etc.
 *
 * GRAEMEANDERSON   2. Okt. 2001  20:12:42  RB: rb_gsmms2, IB: REL_MGMT_011, PB: GAN00071, Rev: 1
 * -> OCR00001282   Dynamically address sector0 PTE data to avoid clash with arm_init code
 *   Mod UseOldCalData fn due to changes for addressing cal data since location defined in arm.map file
 *
 * ANOCK            29. Aug. 2001  10:51:17  RB: rb_gsmms2, IB: REL_MGMT_010, PB: ANO00075, Rev: 2
 * -> OCR00000605   Inconsistencies in UH source code (header file handling)
 *   Had to adapt several files, after having corrected the handling of UH header files.
 *
 * GRAEMEANDERSON   24. Aug. 2001  15:07:59  RB: rb_gsmms2, IB: REL_MGMT_010, PB: GAN00066, Rev: 2
 *   Remove warning in CtSetVersionString
 *
 * GRAEMEANDERSON   24. Aug. 2001  13:32:09  RB: rb_gsmms2, IB: REL_MGMT_010, PB: GAN00066, Rev: 1
 * -> OCR00001150   PTE commands Show/SetCalDataVer and Show/StoreSec0CustomerData text versions
 *   Change compiler switch !TLC_PLATFORM to SECTOR0_CALIBRATION
 *   Added PTE functions CTSetVersionString and CTShowVersionText
 *   Improve UseOldCalData function
 *
 * ANOCK            10. Aug. 2001  19:18:09  RB: rb_gsmms2, IB: REL_MGMT_010, PB: ANO00072, Rev: 1
 *   Made the handling of the UH files correct and consistent again
 *   (both in the code itself and in comments).
 *
 * GRAEMEANDERSON   31. Jul. 2001  17:00:13  RB: rb_gsmms2, IB: REL_MGMT_010, PB: GAN00059, Rev: 1
 *   Reversed the logic of the checks on the SysStartData flags. Documented in the PTE command reference guide.
 *   Improved the display of ShowCalData command.
 *
 * GRAEMEANDERSON   18. Jul. 2001  14:28:25  RB: rb_gsmms2, IB: REL_MGMT_010, PB: GAN00055, Rev: 8
 *   Another reg test tweak
 *
 * GRAEMEANDERSON   18. Jul. 2001  13:27:29  RB: rb_gsmms2, IB: REL_MGMT_010, PB: GAN00055, Rev: 7
 *   Regtest cleanup before PB check in
 *
 * GRAEMEANDERSON   17. Jul. 2001  17:26:11  RB: rb_gsmms2, IB: REL_MGMT_010, PB: GAN00055, Rev: 6
 *   Clean up warnings and don't use dc_arm.h - set CT_BAND_* variables for the bands in Cttri.h instead
 *
 * GRAEMEANDERSON   17. Jul. 2001  14:07:36  RB: rb_gsmms2, IB: REL_MGMT_010, PB: GAN00055, Rev: 5
 *   Update display of calibration data command ShowCalData
 *
 * GRAEMEANDERSON   16. Jul. 2001  14:35:11  RB: rb_gsmms2, IB: REL_MGMT_010, PB: GAN00055, Rev: 4
 *   Add Preparefor IMEIBlackout prototype and corrected TLC PLATFORM ifdefs
 *
 * HAIWANG          3. Jul. 2001  10:25:25  RB: rb_gsmms2, IB: REL_MGMT_010, PB: HAI00094, Rev: 1
 *   Deleted the compiler switch TLC_PLATFORM
 *
 * ANOCK            20. Jun. 2001  16:15:46  RB: rb_gsmms2, IB: REL_MGMT_009, PB: ANO00067, Rev: 1
 *   Moved an #ifdef to the right place to avoid a compiler warning.
 *
 * GRAEMEANDERSON   13. Jun. 2001  15:33:54  RB: rb_gsmms2, IB: REL_MGMT_009, PB: GAN00053, Rev: 1
 *   Move sector 0 write security check into the PTE context
 *
 * GRAEMEANDERSON   27. Apr. 2001  10:46:07  RB: rb_gsmms2, IB: REL_MGMT_008, PB: GAN00047, Rev: 1
 *   Removed redundant commands
 *
 * MIKECRONIN       6. Apr. 2001  20:34:07  RB: rb_gsmms2, IB: REL_MGMT_007, PB: MC00028, Rev: 1
 *   Changes proposed by Graeme
 *
 * GRAEMEANDERSON   6. Apr. 2001  14:24:04  RB: rb_gsmms2, IB: REL_MGMT_007, PB: GAN00045, Rev: 3
 *   Renamed CheckHWok and ShowNVMMap to something more appropriate
 *
 * MLOHSE           28. Mar. 2001  16:27:42  RB: rb_gsmms2, IB: REL_MGMT_007, PB: MLO00051, Rev: 1
 *   Clean up caused by NVM -> FFS transition
 *
 * GRAEMEANDERSON   27. Mar. 2001  17:14:08  RB: rb_gsmms2, IB: REL_MGMT_007, PB: GAN00045, Rev: 1
 *   Changes for new malloc RAM cal data structure and some compiler warning cleaning
 *
 * KTUCHMAN         7. Mar. 2001  13:24:48  RB: rb_gsmms2, IB: REL_MGMT_007, PB: ktu00052, Rev: 1
 *   Use defines for GSMExit codes.
 *
 * WSCHODERER       1. Mar. 2001  13:59:36  RB: rb_gsmms2, IB: REL_MGMT_006, PB: wos00077, Rev: 1
 *   Added directory element "hwct".
 *
 * WSCHODERER       21. Feb. 2001  17:08:34  RB: rb_gsmms2, IB: REL_MGMT_006, PB: wos00076, Rev: 2
 *   don't include hwproto.h
 *
 * MLOHSE           16. Feb. 2001  13:38:51  RB: rb_gsmms2, IB: REL_MGMT_006, PB: MLO00047, Rev: 1
 *   Add hidden command to reload sec0 cal data
 *
 * GRAEMEANDERSON   30. Jan. 2001  21:37:12  RB: rb_gsmms2, IB: REL_MGMT_005, PB: GAN00037, Rev: 3
 *   Fix small bugs still in ADC cal reporting and setting commands
 *
 * GRAEMEANDERSON   30. Jan. 2001  14:57:48  RB: rb_gsmms2, IB: REL_MGMT_005, PB: GAN00037, Rev: 1
 *   Merge from PB GAN00036 into PB GAN00037 taken from latest IB. Small corrections for ADC value display.
 *
 * GRAEMEANDERSON   25. Jan. 2001  14:43:20  RB: rb_gsmms2, IB: REL_MGMT_005, PB: GAN00036, Rev: 1
 *   Tidy up, trim and improve the ADC PTE commands
 *
 * GRAEMEANDERSON   18. Jan. 2001  13:33:04  RB: rb_gsmms2, IB: REL_MGMT_005, PB: GAN00035, Rev: 2
 *   Small fixes in commands which display complete cal data structure
 *
 * GRAEMEANDERSON   17. Jan. 2001  18:29:18  RB: rb_gsmms2, IB: REL_MGMT_005, PB: GAN00035, Rev: 1
 *   Add new ADC structure and PTE mode commands. Not for TLC platform
 *
 * MLOHSE           9. Dec. 2000  18:19:25  RB: rb_gsmms2, IB: REL_MGMT_005, PB: MLO00037, Rev: 1
 *   minor syntax error fix for DEBUG build
 *
 * SCLAESSEN        9. Dec. 2000  11:52:46  RB: rb_gsmms2, IB: REL_MGMT_005, PB: SCL00007, Rev: 2
 *   Add ifdef BERLIN_PLATFORM to report of UH cal data
 *
 * GRAEMEANDERSON   7. Dec. 2000  14:10:41  RB: rb_gsmms2, IB: REL_MGMT_005, PB: GAN00027, Rev: 1
 *   Add ShowNVMcontents command
 *
 * WSCHEIT          1. Nov. 2000  21:15:28  RB: rb_gsmms2, IB: REL_MGMT_004, PB: WSC00017, Rev: 1
 *   Added DumpDSP
 *
 * MLOHSE           16. Okt. 2000  15:26:11  RB: rb_gsmms2, IB: BERLIN_DLV2, PB: MLO00024, Rev: 1
 *   Calibration data moved from NVM to flash sector 0. (#define SECTOR0_CALIBRATION to use this feature, right now only done for Berlin)
 *
 * ANOCK            17. Aug. 2000  20:25:23  RB: rb_gsmms2, IB: BERLIN_DLV1, PB: ANO00040, Rev: 1
 *   Merged from BERLIN_Draft.
 *
 * GRAEMEANDERSON   4. Aug. 2000  14:42:18  RB: rb_gsmms2, IB: BERLIN_draft, PB: GAN00015, Rev: 1
 *   PTE update for Berlin
 *
 * SANGERER         13. Jul. 2000  15:33:02  RB: rb_gsmms2, IB: BERLIN_draft, PB: sa110700, Rev: 1
 *   First Berlin draft
 *
 * SDARCY           13. May. 2000  15:15:35  RB: rb_gsmms2, IB: L1_TRIDENT, PB: SDA00021, Rev: 3
 *   Improved some CT response strings for SetCalDataVer, ShowCalDataVer.
 *
 * SDARCY           12. May. 2000  11:08:50  RB: rb_gsmms2, IB: L1_TRIDENT, PB: SDA00021, Rev: 2
 *   Renamed some commands. Made ForceNVMGood and bad
 *   commands hidden. Got rid of some warnings. Improved format
 *   of cal data listing output.
 *
 *
*/

/*---------------------------- Includes: ---------------------------------*/
/* General includes */
#include "..\system\portab.h"
#include "..\system\syslib.h"
#include "..\system\sysprim.h"
#include "..\global\timedate.h"
#include "..\global\gsmtimer.h"
#include "..\global\gsmexit.h"

#include "..\nv\hwcaldat.h"
#include "..\config\hwnvm.h"
#include "..\config\mnuitypes.h"
#include "..\config\uhconfig.h"

//#if defined (RENESAS_RF_B5)
#include "..\config\uhcaldat.h"
//#endif

/* CT related */
#include "..\ct\ct.h"
#include "..\ct\ctlocal.h"
#include "..\ct\cttri.h"
#if defined (TLC_PLATFORM)
#include "..\..\basecust\custt7\ct\security\imei_enc.h"
#endif  
#include "..\hw\dsp_if\hwshared.h"
#include "..\hw\dsp_if\dc.h"

#if defined (IO_TRACER)
#include "..\io\iodriver.h"
#include "..\hw\hwvariant.h"
#include "..\io\trdriver.h"
#endif
// MSL
#if defined(IMEI_SECURITY_MSL)
#include "..\fl\flashgen.h"
#include "..\fl\flashutl.h"
#endif
/*---------------------------- Local Defines: ----------------------------*/

#define COMPLETE_CAL_REPORT_BUF_SIZE (40*1024)  /* 20*1024 - buffer overflow */
#define DCROFFS_CAL_REPORT_BUF_SIZE (4*1024)
#define CT_BATT_SAMPLES 20

// MSL
#if defined(IMEI_SECURITY_MSL)
#define MSL_ADDR_WEIGHT 0x92
#define MSL_CODE_WEIGHT 0x47
#endif

/*---------------------------- Local Typedefs: ---------------------------*/

typedef struct
   {
   INT16 channelNo;
   INT16 ADCLevel;              /* High = 0, Low = 1 */
   INT16 offsetValue;
   }     ADChannelOffsetType;

typedef struct
   {
   UINT16 SampleNumber;
   UINT16 SampleDelay;
   }     BattSamplesType;

#if defined (RENESAS_RF_B5)
typedef struct
   {
   UINT16 Length;
   UINT16 Data[RF_CONFIG_DATA_SIZE_MAX];
   }     RFConfigCal;


typedef struct
   {
   UINT16 Length;