sniffers.txt

500 C execises document

Basic Packet-Sniffer Construction
from the Ground Up

by Chad Renfro
 [e-mail]

Packet sniffers are applications used by network administrators to monitor and
validate network traffic. Sniffers are programs used to read packets that travel across 
the network at various levels of the OSI layer. And like most security tools sniffers too
can be used for both good and destructive purposes. On the light-side of network
administration sniffers help quickly track down problems such as bottlenecks and
misplaced filters. However on the dark-side sniffers can be used to reap tremendous
amounts of havoc by gathering legitimate user names and passwords so that other
machines can be quickly compromised. Hopefully this paper will be used to help
administrators gain control of their networks by being able to analyze network traffic 
not only by using preconstructed  sniffers but by being able to create their own. This
paper will look at the packet sniffer from the bottem up, looking in depth at the sniffer
core and then gradualy adding functionality to the application. The example included
here will help illustrate some rather cumbersome issues when dealing with network
programing. In no way will this single paper teach a person to write a complete sniffing
application like tcpdump or sniffit. It will however teach some very fundamental issues
that are inherent to all packet sniffers. Like how the packets are accessed on the network
and how to work with the packets at different layers.

The most basic sniffer...

Sniffer #1.

   This sniffer will illustrate the use of the  SOCK_RAW device and show how to gather
packets from the network and print out some simple header  information to std_out.
Although the basic premise is that packet sniffers operate  in a promiscuous mode which
listens to all packets weather or not the packet is destined  for the machines mac address,
this example will collect packets in a non-promiscuous mode . This will let usconcentrate
on the SOCK_RAW device for the first example. To operate this same  code  in a
promiscous mode  the network card may be put in a promiscous mode manually. To do
this type this in after the log in :

   > su -
   Password : ********
   # ifconfig eth0 promisc

   This will now set the network interface eth0 in promiscous mode. 


/************************simple_Tcp_sniff.c********************/

1. #include <stdio.h>
2. #include <sys/socket.h>
3. #include <netinet/in.h>
4. #include <arpa/inet.h>

5. #include "headers.h"

6. int main()
7. {
8.     int sock, bytes_recieved, fromlen;
9.     char buffer[65535];
10.     struct sockaddr_in from;
11.     struct ip  *ip;
12.     struct tcp *tcp;
13.

14.     sock = socket(AF_INET, SOCK_RAW, IPPROTO_TCP);

15. while(1)
16.  {
17. fromlen = sizeof from;
18. bytes_recieved = recvfrom(sock, buffer, sizeof buffer, 0,
                                         (struct sockaddr *)&from, &fromlen);
19. printf("\nBytes received ::: %5d\n",bytes_recieved);
20. printf("Source address ::: %s\n",inet_ntoa(from.sin_addr));
21. ip = (struct ip *)buffer;
22. printf("IP header length ::: %d\n",ip->ip_length);
23. printf("Protocol ::: %d\n",ip->ip_protocol);
24. tcp = (struct tcp *)(buffer + (4*ip->ip_length));
25. printf("Source port ::: %d\n",ntohs(tcp->tcp_source_port);
26. printf("Dest port  ::: %d\n",ntohs(tcp->tcp_dest_port));

27.          }
28. }
/***********************EOF**********************************/

What this means :

Line 1-4 :
   These are the header files required to use some needed c functions we will use later

<stdio.h>      =     functions like printf and std_out
<sys/socket.h> =     this will give access to the SOCK_RAW and the 
                     IPPROTO_TCP defines  
<netinet/in.h> =     structs like the sockaddr_in 
<arpa/inet.h>  =     lets us use the functions to do network to host byte 
                     order conversions
line 5 :
   This is the header file headers.h that is also included with this program to give standard
   structures to access the ip and tcp fields. The structures identify each field in the ip and
   tcp header for instance :
 
struct ip {
       unsigned int        ip_length:4;         /* length of ip-header in 32-bit
                                                           words*/
         unsigned int        ip_version:4;        /* set to "4", for Ipv4 */
       unsigned char       ip_tos;              /* type of service*/
       unsigned short      ip_total_length;     /* Total length of ip datagram in
                                                           bytes */
       unsigned short      ip_id;               /*identification field*/
       unsigned short      ip_flags;
       unsigned char       ip_ttl;              /*time-to-live, sets upper limit
                                                          for max number of routers to 
                                                          go through before the packet is
                                                          discarded*/

       unsigned char       ip_protocol;         /*identifies the correct transport
                                  protocol */
       unsigned short      ip_cksum;            /*calculated for the ip header ONLY*/
               unsigned int        ip_source;           /*source ip */
               unsigned int        ip_dest;             /*dest ip*/
};



struct tcp {
                 unsigned short     tcp_source_port; /*tcp source port*/
         unsigned short     tcp_dest_port;   /*tcp dest port*/
         unsigned int       tcp_seqno;       /*tcp sequence number,
                                                       identifies the byte in the 
                                                       stream of data*/
         unsigned int       tcp_ackno;       /*contains the next seq num that
                                                       the sender expects to recieve*/
         unsigned int       tcp_res1:4,      /*little-endian*/
                                    tcp_hlen:4,      /*length of tcp header in 32-bit
                                                       words*/ 
                            tcp_fin:1,       /*Finish flag "fin"*/
                                    tcp_syn:1,       /*Synchronize sequence
                                                       numbers to start a connection
                    tcp_rst:1,       /*Reset flag */
                                    tcp_psh:1,       /*Push, sends data to the
                                                       application*/
                                    tcp_ack:1,       /*acknowledge*/
                                    tcp_urg:1,       /*urgent pointer*/
                                    tcp_res2:2;
                 unsigned short     tcp_winsize;     /*maxinum number of bytes able
                                       to recieve*/
         unsigned short     tcp_cksum;       /*checksum to cover the tcp
                                                       header and data portion of the
                                                       packet*/

         unsigned short     tcp_urgent;     /*vaild only if the urgent flag is
                              set, used to transmit
                                                      emergency data */
};


line 8-13 :
   This is the variable declaration section
      
integers :
     sock                 = socket file descriptor 
     bytes_recieved       = bytes read from the open socket "sock" 
     fromlen              = the size of the from structure char :
             buffer               = where the ip packet that is read off the 
                    wire will be held buffer will hold a datagram 
                    of 65535 bytes which is the maximum length 
                    of an ip datagram.

       Struct sockaddr_in :

   struct sockaddr_in {
short int          sin_family;  /* Address family   */
unsigned short int sin_port;    /* Port number      */
struct in_addr     sin_addr;    /* Internet address */
unsigned char      sin_zero[8]; /* Same size as struct sockaddr */
    };

      Before we go any further two topics should be covered,byte-ordering and sockaddr
   structures.  Byte-ordering,is the way that the operating system stores bytes in memory.
   There are two ways that this is done first with the low-order byte at the starting address
   this is known as "little-endian" or host-byte order. Next bytes can be stored with the
   high order byte at the starting address, this is called "big-endian" or network byte order.
   The Internet protocol uses >>>>>> network byte order.
    
       This is important because if you are working on an intel based linux box you will be
   programming on a little-endian machine and to send data via ip you must convert the
   bytes to network-byte order. For examle lets say we are going to store a 2-byte number
   in memory say the value is (in hex) 0x0203


   First this is how the value is stored on a big-endian machine:

                    ___________
                   | 02  | 03  |
                   |_____|_____| 
        address:    0       1


   And here is the same value on a little-endian machine:

                   ___________
                  |03   | 02  |
                  |_____|_____|
       address:    1       0


   The same value is being represented in both examples it is just how we order the bytes
   that changes.

   The next topic that you must understand is the sockaddr vs. the sockaddr_in structures.
   The struct sockaddr is used to hold information about the socket such as the family type
   and other address information it looks like :

struct sockaddr {
          unsigned short sa_family;         /*address family*/ 
                  char           sa_data[14];       /*address data*/
};
 
      The first element in the structure "sa_family" will be used to reference what the family
   type is for the socket, in our sniffer it will be AF_INET. Next the "sa_data" element
   holds the destination port and address for the socket. To make it easier to deal with the
   sockaddr struct the use of the sockaddr_in structure is commonly used. Sockaddr_in 
   makes it easier to reference all of the elements that are contained by sockaddr.

   Sockaddr_in looks like:

   struct sockaddr_in {
             short int          sin_family;    /* Address family               */
             unsigned short int sin_port;      /* Port number                  */
             struct in_addr     sin_addr;      /* Internet address             */
             unsigned char      sin_zero[8];   /* Same size as struct sockaddr */
   };

      We will use this struct and declare a variable "from" which will give us the information
   on the packet that we will collect from the raw socket. For instance the var
   "from.sin_addr" will give access to the packets source address (in 
   network byte order). The thing to mention here is that all items in the sockaddr_in
   structure must be in network-byte order. When we receive the data in the sockaddr_in
   struct we must then convert it back to Host-byte order. To do this we can use some
   predefined functions to convert back and forth between  host and network byteorder.

   Here are the functions we will use:

ntohs       : this function converts  network byte order to host byte order
                      for a 16-bit short

ntohl       : same as above but for a 32-bit long

inet_ntoa   : this function converts a 32-bit network binary value to a
                      dotted decimal ip address

inet_aton   : converts a character string  address to the 32-bit network
                      binary value

inet_addr   : takes a char string dotted decimal addr and returns a 32-bit
                      network binary value

   To further illustrate ,say I want to know the port number that this packet originated from:

int packet_port; packet_port =ntohs(from.sin_port);
                         ^^^^^ 

   If I want the source IP address of the packet we will use a special function to get it to the
   123.123.123.123 format:

char *ip_addr; ip_addr =inet_ntoa(from.sin_addr)
                 ^^^^^^^^^

line 11-12:

   struct ip *ip :
   struct tcp *tcp :

      This is a structure that we defined in our header file "headers.h". This structure is
   declared so that we can access individual fields of the ip/tcp header. The structure is like
   a transparent slide with predefined fields drawn on it. When a packet is taken off 
   the wire it is a stream of bits, to make sense of it the "transparency" (or cast) is laid on
   top of or over the bits so the individual fields can be referenced.

Line 14 :

   sock = socket(AF_INET, SOCK_RAW, IPPROTO_TCP);